NAME

transmission-remote - a remote control utility for transmission-daemon1 and transmission(1)

SYNOPSIS

-words [host:port | host | port ] [-a filenames-or-URLs [-as ] ] [-AS ] [-asd number ] [-asu number ] [-asc ] [-ASC ] [-b ] [-c path | -C ] [-d number | -D ] [-e size ] [-er | ep | et ] [--exit ] [-f ] [-g files ] [-G files ] [-gsr ratio ] [-GSR ] [-h ] [-i ] [-ic ] [-if ] [-ip ] [-it ] [-l ] [-m | M ] [-n user:pass ] [-ne ] [-N netrc ] [-o | O ] [-p port ] [-Bh [-Bn [-

] ] ] [-ph files ] [-pl files ] [-pn files ] [-pr peers ] [-r ] [-rad ] [-s | S ] [-sr ratio ] [-SR ] [-srd ] [-si ] [-st ] [-t all | active | id | hash ] [-hl ] [-HL ] [-u number | -U ] [-utp | no-utp ] [-v ] [-V ] [-w download-dir ] [-x | X ] [-y | Y ] [-pi ]

DESCRIPTION

is a remote control utility for transmission(1) and transmission-daemon1.

By default, connects to the transmission session at localhost:9091. Other sessions can be controlled by specifying a different host and/or port.

OPTIONS

-a --add filenames-or-URLs Add torrents to transmission.
-b --debug
Enable debugging mode.
-as --alt-speed
Use the alternate Limits.
-AS --no-alt-speed
Don't use the alternate Limits.
-asd --alt-speed-downlimit limit
Limit the alternate download speed to limit kilobytes per second.
-asu --alt-speed-uplimit limit
Limit the alternate upload speed to limit kilobytes per second.
-asc --alt-speed-scheduler
Use the scheduled on/off times.
-ASC --no-alt-speed-scheduler
Don't use the scheduled on/off days and times.
--alt-speed-time-begin time
Time to start using the alt speed limits (in hhmm).
--alt-speed-time-end time
Time to stop using the alt speed limits (in hhmm).
--alt-speed-days days
Set the number of days on which to enable the speed scheduler, using a list such as "2,4-6".
--torrent-done-script filename
Specify a file to run each time a torrent finishes
--no-torrent-done-script
Don't run any script when a torrent finishes
-c --incomplete-dir dir
When adding new torrents, store their contents in directory until the torrent is done.
-C --no-incomplete-dir
Don't store incomplete torrents in a different directory.
-d --downlimit limit
Limit the maximum download speed to limit kB/s. If current torrent(s) are selected this operates on them. Otherwise, it changes the global setting.
-D --no-downlimit
Disable download speed limits. If current torrent(s) are selected this operates on them. Otherwise, it changes the global setting.
-e --cache size
Set the session's maximum memory cache size in MiB. This cache is used to reduce disk IO.
-er --encryption-required
Encrypt all peer connections.
-ep --encryption-preferred
Prefer encrypted peer connections.
-et --encryption-tolerated
Prefer unencrypted peer connections.
--exit
Tell the Transmission to initiate a shutdown.
-f --files
Get a file list for the current torrent(s)
-g --get all | file-index | files
Mark file(s) for download. all marks all all of the torrent's files for downloading, file-index adds a single file to the download list, and files adds multiple files to the download list, such as "-g1,3-5" to add files #1, #3, #4, and #5 to the download list.
-G --no-get all | file-index | files
Mark file(s) for not downloading.
-gsr --global-seedratio ratio
All torrents, unless overridden by a per-torrent setting, should seed until a specific ratio
-GSR --no-global-seedratio
All torrents, unless overridden by a per-torrent setting, should seed regardless of ratio
-h --help
Print command-line option descriptions.
-i --info
Show details of the current torrent(s)
-if --info-files
List the specified torrent's files
-ip --info-peers
List the specified torrent's peers
-ic --info-pieces
List the specified torrent's pieces
-it --info-trackers
List the specified torrent's trackers
-si --session-info
List session information from the server
-st --session-stats
List statistical information from the server
-l --list
List all torrents
-m --portmap
Enable portmapping via NAT-PMP or UPnP
-M --no-portmap
Disable portmapping
-n --auth username:password
Set the username and password for authentication
-ne --authenv
Set the authentication information from the TR_AUTH environment variable which must be formatted as username:password.
-N --netrc filename
Set the authentication information from a netrc file. See netrc(5) for more information.
-o --dht
Enable distributed hash table (DHT).
-O --no-dht
Disable distribued hash table (DHT).
-p --port port
Set the port for use when listening for incoming peer connections
-Bh --bandwidth-high
Give this torrent first chance at available bandwidth
-Bn --bandwidth-normal
Give this torrent the bandwidth left over by high priority torrents
-

Give this torrent the bandwidth left over by high and normal priority torrents
-ph --priority-high all | file-index | files
Try to download the specified file(s) first. all marks all of the torrent's files as normal priority, file-index sets a single file's priority as normal, and files sets multiple files' priorities as normal, such as "-pn1,3-5" to normalize files #1, #3, #4, and #5.
-pn --priority-normal all | file-index | files
Try to download the specified files normally.
-pl --priority-low all | file-index | files
Try to download the specified files last
-pr --peers number
Set the maximum number of peers. If current torrent(s) are selected this operates on them. Otherwise, it changes the global setting.
-r --remove
Remove the current torrent(s). This does not delete the downloaded data.
-rad --remove-and-delete
Remove the current torrent(s) and delete their downloaded data.
--reannounce
Reannounce the current torrent(s). This is the same as the GUI's "ask tracker for more peers" button.
--move
Move the current torrents' data from their current locations to the specified directory.
--find
Tell Transmission where to look for the current torrents' data.
-sr --seedratio ratio
Let the current torrent(s) seed until a specific ratio
-SR --no-seedratio
Let the current torrent(s) seed regardless of ratio
-srd --seedratio-default
Let the current torrent(s) use the global seedratio settings
-td --tracker-add tracker
Add a tracker to a torrent
-tr --tracker-remove trackerId Remove a tracker from a torrent
-s --start
Start the current torrent(s)
-S --stop
Stop the current torrent(s) from downloading or seeding
--start-paused
Start added torrents paused
--no-start-paused
Start added torrents unpaused
-t --torrent all | active | id | torrent-hash
Set the current torrent(s) for use by subsequent options. The literal all will apply following requests to all torrents; the literal active will apply following requests to recently-active torrents; and specific torrents can be chosen by id or hash To set more than one current torrent, join their ids together in a list, such as "-t2,4,6-8" to operate on the torrents whose IDs are 2, 4, 6, 7, and 8.
--trash-torrent
Delete torrents after adding
--no-trash-torrent
Do not delete torrents after adding
-hl --honor-session
Make the current torrent(s) honor the session limits.
-HL --no-honor-session
Make the current torrent(s) not honor the session limits.
-u --uplimit limit
Limit the maximum upload speed to limit kB/s. If current torrent(s) are selected this operates on them. Otherwise, it changes the global setting.
-U --no-uplimit
Disable upload speed limits.
--utp
Enable uTP for peer connections.
--no-utp
Disable uTP for peer connections. If current torrent(s) are selected this operates on them. Otherwise, it changes the global setting.
-v --verify
Verify the current torrent(s)
-V --version
Show version number and exit
-w --download-dir directory
When used in conjunction with --add, set the new torrent's download folder. Otherwise, set the default download folder.
-x --pex
Enable peer exchange (PEX).
-X --no-pex
Disable peer exchange (PEX).
-y --lds
Enable local peer discovery (LPD).
-Y --no-lds
Disable local peer discovery (LPD).
-pi --peer-info
List the current torrent's connected peers. In the `status' section of the list, the following shorthand is used:
--blocklist-update
Update blocklist from URL specified in remote client's settings with blocklist-url key.

EXAMPLES

List all torrents:
$ transmission-remote -l
List all active torrents:
$ transmission-remote -tactive -l
Set download and upload limits to 400 kB/sec and 60 kB/sec:
$ transmission-remote -d400 -u60
$ transmission-remote --downlimit=400 --uplimit=60
Set alternate download and upload limits to 100 kB/sec and 20 kB/sec:
$ transmission-remote -asd100 -asu20
$ transmission-remote --alt-speed-downlimit=100 --alt-speed-uplimit=20
Set the scheduler to use the alternate speed limits on weekdays between 10AM and 11PM
$ transmission-remote --alt-speed-time-begin=1000
$ transmission-remote --alt-speed-time-end=2300
$ transmission-remote --alt-speed-days=1-5
$ transmission-remote --alt-speed-scheduler
List all torrents' IDs and states:
$ transmission-remote -l
List all torrents from a remote session that requires authentication:
$ transmission-remote host:9091 --auth=username:password -l
Start all torrents:
$ transmission-remote -tall --start
Add two torrents:
$ transmission-remote -a one.torrent two.torrent
Add all torrents in ~/Desktop:
$ transmission-remote -a ~/Desktop/*torrent
Get detailed information on the torrent whose ID is '1':
$ transmission-remote -t1 -i
Get a list of a torrent's files:
$ transmission-remote -t1 -f
Download only its second and fourth files:
$ transmission-remote -t1 -Gall -g2,4
Set all torrents' first two files' priorities to high:
$ transmission-remote -tall -ph1,2
Set all torrents' files' priorities to normal:
$ transmission-remote -tall -pnall

ENVIRONMENT

http_proxy
Sets the proxy to use for http tracker announces.

AUTHORS

An -nosplit An Jordan Lee , An Josh Elsasser , An Eric Petit , and An Mitchell Livingston .

SEE ALSO

transmission-create1, transmission-daemon1, transmission-edit1, transmission-gtk1, transmission-qt1, transmission-remote1, transmission-show1

http://www.transmissionbt.com/