virt-filesystems (1) - Linux Man Pages
virt-filesystems: List filesystems, partitions, block devices, LVM in a virtual machine or disk image
virt-filesystems - List filesystems, partitions, block devices, LVM in a virtual machine or disk image
virt-filesystems [--options] -d domname virt-filesystems [--options] -a disk.img [-a disk.img ...]
DESCRIPTIONThis tool allows you to discover filesystems, partitions, logical volumes, and their sizes in a disk image or virtual machine. It is a replacement for virt-list-filesystems(1) and virt-list-partitions(1).
One use for this tool is from shell scripts to iterate over all filesystems from a disk image:
for fs in $(virt-filesystems -a disk.img); do # ... done
Another use is to list partitions before using another tool to modify those partitions (such as virt-resize(1)). If you are curious about what an unknown disk image contains, use this tool along with virt-inspector(1).
Various command line options control what this program displays. You need to give either -a or -d options to specify the disk image or libvirt guest respectively. If you just specify that then the program shows filesystems found, one per line, like this:
$ virt-filesystems -a disk.img /dev/sda1 /dev/vg_guest/lv_root
If you add -l or --long then the output includes extra information:
$ virt-filesystems -a disk.img -l Name Type VFS Label Size /dev/sda1 filesystem ext4 boot 524288000 /dev/vg_guest/lv_root filesystem ext4 root 10212081664
If you add --extra then non-mountable (swap, unknown) filesystems are shown as well:
$ virt-filesystems -a disk.img --extra /dev/sda1 /dev/vg_guest/lv_root /dev/vg_guest/lv_swap /dev/vg_guest/lv_data
If you add --partitions then partitions are shown instead of filesystems:
$ virt-filesystems -a disk.img --partitions /dev/sda1 /dev/sda2
Similarly you can use --logical-volumes, --volume-groups, --physical-volumes, --block-devices to list those items.
You can use these options in combination as well (if you want a combination including filesystems, you have to add --filesystems). Notice that some items fall into several categories (eg. /dev/sda1 might be both a partition and a filesystem). These items are listed several times. To get a list which includes absolutely everything that virt-filesystems knows about, use the --all option.
UUIDs (because they are quite long) are not shown by default. Add the --uuid option to display device and filesystem UUIDs in the long output.
--all --long --uuid is a useful combination to display all possible information about everything.
$ virt-filesystems -a win.img --all --long --uuid -h Name Type VFS Label Size Parent UUID /dev/sda1 filesystem ntfs System Reserved 100M - F81C92571C92112C /dev/sda2 filesystem ntfs - 20G - F2E8996AE8992E3B /dev/sda1 partition - - 100M /dev/sda - /dev/sda2 partition - - 20G /dev/sda - /dev/sda device - - 20G - -
- Display brief help.
- -a file
- --add file
Add file which should be a disk image from a virtual machine. If
the virtual machine has multiple block devices, you must supply all of
them with separate -a options.
The format of the disk image is auto-detected. To override this and force a particular format use the --format=.. option.
- -a URI
- --add URI
- Add a remote disk. See ``ADDING REMOTE STORAGE'' in guestfish(1).
Display everything. This is currently the same as specifying these
options: --filesystems, --extra, --partitions,
--block-devices, --logical-volumes, --volume-groups,
--physical-volumes. (More may be added to this list in future).
See also --long.
- Display block devices.
- -c URI
- --connect URI
If using libvirt, connect to the given URI. If omitted, then we
connect to the default libvirt hypervisor.
If you specify guest block devices directly (-a), then libvirt is not used at all.
- Write out the results in CSV format (comma-separated values). This format can be imported easily into databases and spreadsheets, but read ``NOTE ABOUT CSV FORMAT'' below.
- -d guest
- --domain guest
- Add all the disks from the named libvirt guest. Domain UUIDs can be used instead of names.
- When prompting for keys and passphrases, virt-filesystems normally turns echoing off so you cannot see what you are typing. If you are not worried about Tempest attacks and there is no one else in the room you can specify this flag to see what you are typing.
This causes filesystems that are not ordinary, mountable filesystems
to be displayed. This category includes swapspace, and filesystems
that are empty or contain unknown data.
This option implies --filesystems.
Display mountable filesystems. If no display option was selected then
this option is implied.
With --extra, non-mountable filesystems are shown too.
The default for the -a option is to auto-detect the format of the
disk image. Using this forces the disk format for -a options which
follow on the command line. Using --format with no argument
switches back to auto-detection for subsequent -a options.
virt-filesystems --format=raw -a disk.img
forces raw format (no auto-detection) for disk.img.
virt-filesystems --format=raw -a disk.img --format -a another.img
forces raw format (no auto-detection) for disk.img and reverts to auto-detection for another.img.
If you have untrusted raw-format guest disk images, you should use this option to specify the disk format. This avoids a possible security problem with malicious guests (CVE-2010-3851).
- In --long mode, display sizes in human-readable format.
- Read key or passphrase parameters from stdin. The default is to try to read passphrases from the user by opening /dev/tty.
Display extra columns of data (``long format'').
A title row is added unless you also specify --no-title.
The extra columns displayed depend on what output you select, and the ordering of columns may change in future versions. Use the title row, --csv output and/or csvtool(1) to match columns to data in external programs.
Use -h if you want sizes to be displayed in human-readable format. The default is to show raw numbers of bytes.
Use --uuid to display UUIDs too.
- Display LVM logical volumes. In this mode, these are displayed irrespective of whether the LVs contain filesystems.
In --long mode, don't add a title row.
Note that the order of the columns is not fixed, and may change in future versions of virt-filesystems, so using this option may give you unexpected surprises.
- Display partitions. In this mode, these are displayed irrespective of whether the partitions contain filesystems.
- Display LVM physical volumes.
- In --long mode, display UUIDs as well.
- Enable verbose messages for debugging.
- Display version number and exit.
- Display LVM volume groups.
- Enable tracing of libguestfs API calls.
COLUMNSNote that columns in the output are subject to reordering and change in future versions of this tool.
The filesystem, partition, block device or LVM name.
For device and partition names these are displayed as canonical libguestfs names, so that for example /dev/sda2 is the second partition on the first device.
If the --long option is not specified, then only the name column is shown in the output.
- The object type, for example "filesystem", "lv", "device" etc.
- If there is a filesystem, then this column displays the filesystem type if one could be detected, eg. "ext4".
- If the object has a label (used for identifying and mounting filesystems) then this column contains the label.
The partition type byte, displayed as a two digit hexadecimal number.
A comprehensive list of partition types can be found here:
This is only applicable for DOS (MBR) partitions.
- The size of the object in bytes. If the --human option is used then the size is displayed in a human-readable form.
The parent column records the parent relationship between objects.
For example, if the object is a partition, then this column contains the name of the containing device. If the object is a logical volume, then this column is the name of the volume group.
If there is more than one parent, then this column is (internal to the column) a comma-separated list, eg. "/dev/sda,/dev/sdb".
If the object has a UUID (used for identifying and mounting
filesystems and block devices) then this column contains the UUID as a
The UUID is only displayed if the --uuid option is given.
NOTE ABOUT CSV FORMATComma-separated values (CSV) is a deceptive format. It seems like it should be easy to parse, but it is definitely not easy to parse.
Myth: Just split fields at commas. Reality: This does not work reliably. This example has two columns:
Myth: Read the file one line at a time. Reality: This does not work reliably. This example has one row:
For shell scripts, use "csvtool" (https://github.com/Chris00/ocaml-csv also packaged in major Linux distributions).
For other languages, use a CSV processing library (eg. "Text::CSV" for Perl or Python's built-in csv library).
EXIT STATUSThis program returns 0 if successful, or non-zero if there was an error.
AUTHORRichard W.M. Jones http://people.redhat.com/~rjones/
COPYRIGHTCopyright (C) 2010-2012 Red Hat Inc.
LICENSEThis program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
BUGSTo get a list of bugs against libguestfs, use this link: https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools
To report a new bug against libguestfs, use this link: https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools
When reporting a bug, please supply:
- The version of libguestfs.
- Where you got libguestfs (eg. which Linux distro, compiled from source, etc)
- Describe the bug accurately and give a way to reproduce it.
Run libguestfs-test-tool(1) and paste the complete, unedited
output into the bug report.