SysTutorials

Linux Manual Pages › Section 5

yadifad-conf(5)

yadifad.conf – configuration file for yadifad(8).

Synopsis

${PREFIX}/etc/yadifad.conf

Description

The configuration of yadifad has several containers:

<main>
 General container 
<key>
TSIG keys
<acl>
Access lists
<nsid>
NameServer IDentifier
<rrl>
Response Rate Limiting directives
<zone>
Description of the domain name in specific attributes.
<channels>
Description of the logger outputs.
<dnssec-policy>
Description of dnssec policies.
<key-suite>
Description of the key-suites needed if ‘dnssec policies’ are used.
<key-roll>
Description of the key-rolls needed if ‘dnssec policies’ are used.
<key-template>
Description of the key-templates needed if ‘dnssec policies’ are used.
<denial>
Description of ‘denial’, this can be used in certain ‘dnssec policies’.

The configuration supports included files.
example: include /etc/yadifa/conf.d/local.conf The configuration files can be nested. The configuration consists of:

*
Container, which starts with <container name> and ends with </container name>
*
Variable name
*
1 or 2 arguments
*
Arguments can contain 1 or more comma separated values.

eg.

<container>
 # variable argument
 variable value1 
 # variable argument1 argument2
 variable value1 value2
 # variable argument1
 variable value1,value2
</container>

Examples

Examples of containers defined for a configuration file.

*
Main
1.
Config with includes
# start yadifad.conf <main> container
include /etc/yadifa/conf.d/local.conf
# end yadifad.conf <main> container
2.
Main without includes
<main>
 # Detach from the console (alias: daemonize)
 daemon off
 # Jail the application
 chroot off
 # The path of the log files (alias: chroot-path)
 chrootpath "/chroot/yadifad"
 # The path of the log files (alias: log-path)
 logpath "/var/log/yadifa"
 # The location of the pid file (alias: pid-file)
 pidfile "/var/run/yadifa/yadifad.pid"
 # The path of the zone files (alias: data-path)
 datapath "/var/lib/yadifa"
 # The path of the DNSSEC keys (alias: keys-path)
 keyspath "/var/lib/yadifa/keys"
 # The path of the transfer and journaling files (AXFR & IXFR) (alias: xfr-path)
 xfrpath "/var/lib/yadifa/xfr"
 # A string returned by a query of hostname. CH TXT 
 # note: if you leave this out, the real hostname will be given back (alias: hostname-chaos)
 hostname "server-yadifad"
 # An ID returned by a query to id.server. CH TXT (alias: serverid-chaos)
 serverid "yadifad-01"
 # The version returned by a query to version.yadifa. CH TXT (alias: version-chaos)
 version "2.2.2"
 # Set the maximum UDP packet size. 
 # note: the packetsize cannot be less than 512 or more than 65535.
 # Typical choice is 4096.
 edns0-max-size 4096
 # The maximum number of parallel TCP queries (max-tcp-connections)
 max-tcp-queries 100
 # The minimum data rate for a TCP query (in bytes per second)
 tcp-query-min-rate 512
 # The user id to use (alias: user)
 uid yadifa
 # The group id to use (alias: group)
 gid yadifa
 # The DNS port - any DNS query will use that port unless a specific value is used (alias: server-port)
 port 53
 # The interfaces to listen to.
 # listen 0.0.0.0
 listen 127.0.0.1, 192.0.2.2, 192.0.2.130 port 8053, 2001:db8::2
 # Type of querylog to use
 # 0: none
 # 1: yadifa
 # 2: bind
 # 3: both yadifa and bind
 queries-log-type 1
 # Enable the collection and logging of statistics
 statistics on
 # Maximum number of seconds between two statistics lines
 statistics-max-period 60
 # Drop queries with erroneous content
 #
 # answer-formerr-packets on
 answer-formerr-packets off
 # Maximum number of records in an AXFR packet. Set to 1 for compatibility
 # with very old name servers (alias: axfr-max-record-by-packet)
 axfr-maxrecordbypacket 0
 # Global Access Control rules
 #
 # Rules can be defined on network ranges, TSIG signatures, and ACL rules
 # simple queries:
 #
 # allow-query any
 allow-query !192.0.2.251,any
 # dynamic update of a zone
 #
 # allow-update none
 allow-update admins
 # dynamic update of a slave (forwarded to the master)
 #
 # allow-update-forwarding none
 allow-update-forwarding admins,key abroad-admin-key
 # transfer of a zone (AXFR or IXFR)
 #
 # allow-transfer any
 allow-transfer transferer
 # notify of a change in the master
 #
 # allow-notify any
 allow-notify master,admins
 # If YADIFA has the controller enabled, allow control only for these
 # clients (none by default)
 allow-control localhost
 # overwrite the amount of CPUs detected by yadifad
 cpu-count-override 3
 # set the number of threads to serve queries
 thread-count-by-address 2
</main>
*
Key
TSIG-key configuration
1.
Admin-key key definition (the name is arbitrary)
<key>
 name abroad-admin-key
 algorithm hmac-md5
 secret WorthlessKeyForExample==
</key>
2.
Master-slave key definition
<key>
 name master-slave
 algorithm hmac-md5
 secret MasterAndSlavesTSIGKey==
</key>
*
ACL
Access Control List definitions
1.
Master-slave key use
<acl>
 transferer key master-slave
 admins 192.0.2.0/24, 2001:db8::74
 master 192.0.2.53
 localhost 127.0.0.0/8, ::1
</acl>
*
NSID
DNS NameServer IDentifier
1.
Example with ascii
<nsid>
 ascii belgium-brussels-01
</nsid>
2.
Example with hex
<nsid>
 hex 00320201
</nsid>
*
RRL
Response Rate Limiting
<rrl>
 # Number of identical responses per second before responses are being limited
 responses-per-second 5
 # Number of errors per second before responses are being limited
 errors-per-second 5
 # Random slip parameter
 slip 10
 # If enabled, the rate limits are only logged and not enforced
 log-only off
 # Mask applied to group the IPv4 clients
 ipv4-prefix-length 24
 # Mask applied to group the IPv6 clients
 ipv6-prefix-length 56
 # Rate limits are not subject to the following clients (aka whitelist)
 exempt-clients none
 # Enable or disable the rate limit capabilities
 enabled yes
</rrl>
*
Zone
1.
Master domain zone config
<zone>
 # This server is master for the zone (mandatory)
 type master
 # The domain name (mandatory)
 domain mydomain.eu
 # The zone file, relative to 'datapath' (mandatory for a master) (alias: file-name)
 file master/mydomain.eu
 # List of servers also notified of a change (beside the ones in the zone file) (alias: notifies, notify)
 also-notify 192.0.2.84, 192.0.2.149
 # Set the size of the journal file in KB (alias: journal-size-kb)
 journal-size 8192 
 # Allow dynupdate for these ACL entries
 allow-update admins
 # Allow AXFR/IXFR for these ACL entries
 allow-transfer transferer
 # Use DNSSEC policies otherwise remove or put in remark line below
 dnssec-policy 1
</zone>
2.
Slave domain zone config
<zone>
 # This server is slave for that zone (mandatory)
 type slave
 # The domain name (mandatory)
 domain myotherdomain.eu
 # The address of the master (mandatory for a slave, forbidden for a master) (alias: master)
 masters 191.0.2.53 port 4053 key master-slave
 # The zone file, relative to 'datapath'.
 file slaves/myotherdomain.eu
 # Accept notifes from these ACL entries
 allow-notify master
</zone>
*
DNSSEC-Policy

DNSSEC-Policy needs some extra sections: key-suite, key-roll, key-template (and denial if NSEC3 is configured)

1.
dnssec-policy example with all the needed sections
example with NSEC3
<dnssec-policy>
 id "1"
 description "Example of ZSK and KSK"
 denial "nsec3-with-salt-on"
 key-suite "zsk-1024"
 key-suite "ksk-2048"
</dnssec-policy>

example with NSEC

<dnssec-policy>
 id "2"
 description "Example of ZSK and KSK"
 denial nsec
 key-suite "zsk-1024"
 key-suite "ksk-2048"
</dnssec-policy>
2.
key-suite
<key-suite> 
 id "ksk-2048"
 key-template "ksk-2048"
 key-roll "key-roll-ksk-2048-short-times"
</key-suite> 
<key-suite> 
 id "zsk-1024"
 key-template "zsk-1024"
 key-roll "key-roll-zsk-1024-short-times"
</key-suite> 
3.
key-roll
<key-roll> 
 id "key-roll-ksk-2048-short-times"
# command minutes hours day month day-week week
 generate 5,35 * * * * *
 publish 6,36 * * * * *
 activate 7,37 * * * * *
 inactive 8,38 * * * * * 
 remove 12,42 * * * * *
</key-roll> 
<key-roll> 
 id "key-roll-zsk-1024-short-times"
# command minutes hours day month day-week week
 generate 5,35 * * * * *
 publish 6,36 * * * * *
 activate 7,37 * * * * *
 inactive 8,38 * * * * * 
 remove 12,42 * * * * *
</key-roll> 
4.
key-template
<key-template>
 id "ksk-2048"
 ksk true
 algorithm 8
 size 2048
</key-template>
<key-template>
 id "zsk-1024"
 ksk false
 algorithm 8
 size 1024
</key-template>
5.
denial
<denial> 
 id "nsec3-with-salt-on"
 salt "ABCD"
 algorithm 1
 iterations 5
 optout off 
</denial> 
<denial> 
 id "nsec3-with-salt-length-on"
 salt-length 4
 algorithm 1
 iterations 5
 optout off 
</denial> 
*
Channels

Logging output-channel configurations: The "name" is arbitrary and is used in the <loggers>.
The "stream-name" defines the output type (ie: a file name or syslog).
The "arguments" are specific to the output type (ie: unix file access rights or syslog options and facilities).

1.
Example: YADIFA running as daemon channel definition.
<channels>
# name stream-name arguments
 database database.log 0644
 dnssec dnssec.log 0644
 server server.log 0644
 statistics statistics.log 0644
 system system.log 0644
 queries queries.log 0644
 zone zone.log 0644
 all all.log 0644
 syslog syslog user
</channels>
2.
Example: YADIFA running in debug mode.
This example shows the "stderr" and "stdout" which can also be used in the first example, but will output to the console.
<channels>
# name stream-name arguments
 syslog syslog user
 stderr STDERR
 stdout STDOUT
</channels>
*
Loggers

Logging input configurations: The "bundle" name is predefined: database, dnssec, server, statistics, system, zone.
The "debuglevel" uses the same names as syslog or "*" or "all" to filter the input.
The "channels" are a comma-separated list of channels.

1.
Example without syslog
<loggers>
# bundle debuglevel channels
 database ALL database,all
 dnssec warning dnssec,all
 server INFO,WARNING,ERR,CRIT,ALERT,EMERG server,all
 statistics * statistics
 system * system,all
 queries * queries
 zone * zone,all
</loggers>
2.
Example with syslog
<loggers>
# bundle debuglevel channels
 database ALL database,syslog
 dnssec warning dnssec,syslog
 server INFO,WARNING,ERR,CRIT,ALERT,EMERG server,syslog
 stats * statistics, syslog
 system * system,syslog
 queries * queries,syslog
 zone * zone,syslog
</loggers>

The defined loggers are:

system
contains low level messages about the system such as memory allocation, threading, IOs, timers and cryptography, …
database
It contains messages about most lower-level operations in the DNS database. ie: journal, updates, zone loading and sanitization, DNS message query resolution, …)
dnssec
contains messages about lower-level dnssec operations in the DNS database. ie: status, maintenance, verification, …
server
contains messages about operations in the DNS server. ie: start up, shutdown, configuration, transfers, various services status (database management, network management, DNS notification management, dynamic update management, resource rate limiting, …)
zone
contains messages about the loading of a zone from a source (file parsing, transferred binary zone reading, …)
stats
contains the statistics of the server.
queries
contains the queries on the server. Queries can be logged with the BIND and/or with the YADIFA format.

BIND format:

client sender-ip#port: query: fqdn class type +SETDC (listen-ip)

YADIFA format:

query [ id ] {+SETDC} fqdn class type (sender-ip#port)

where:

id
is the query message id
+
means the message has the Recursion Desired flag set
S
means the message is signed with a TSIG
E
means the message is EDNS
T
means the message was sent using TCP instead of UDP
D
means the message has the DNSSEC OK flag set
C
means the message has the Checking Disabled flag set
fqdn
is the queried FQDN
class
is the queried class
type
is the queried type
sender-ip
is the IP of the client that sent the query
port
is the port of the client that sent the query
listen-ip
is the listen network interface that received the message
Note that on YADIFA any unset flag is replaced by a ‘-‘, on BIND only the ‘+’ follows that rule.

System operators will mostly be interested in the info and above messages of queries and stats, as well as the error and above messages of the other loggers.

See Also

yadifad(8)

Notes

Since unquoted leading whitespace is generally ignored in the yadifad.conf you can indent everything to taste.

Changes

Please check the file ChangeLog from the sources.

Version

Version: 2.2.3 of 2016-12-15.

Mailing Lists

There exists a mailinglist for questions relating to any program in the yadifa package:

*
yadifa-users [at] mailinglists.yadifa.eu
for submitting questions/answers.
*
http://www.yadifa.eu/mailing-list-users
for subscription requests.

If you would like to stay informed about new versions and official patches send a subscription request to via:

*
http://www.yadifa.eu/mailing-list-announcements

(this is a readonly list).

License And Copyright

Copyright
(C)2012-2016, EURid
B-1831 Diegem, Belgium
info [at] yadifa.eu

Authors

Gery Van Emelen
Email: Gery.VanEmelen [at] EURid.eu
Eric Diaz Fernandez
Email: Eric.DiazFernandez [at] EURid.eu

WWW: http://www.EURid.eu