systemd-index(7)
systemd.index – List all manpages from the systemd project
3
30-systemd-environment-d-generator(8) — Load variables specified by environment.d
B
binfmt.d(5) — Configure additional binary formats for executables at bootbootctl(1) — Control EFI firmware boot settings and manage boot loaderbootup(7) — System bootup processbusctl(1) — Introspect the bus
C
coredump.conf(5) — Core dump storage configuration filescoredump.conf.d(5) — Core dump storage configuration filescoredumpctl(1) — Retrieve and process saved core dumps and metadatacrypttab(5) — Configuration for encrypted block devices
D
daemon(7) — Writing and packaging system daemonsdnssec-trust-anchors.d(5) — DNSSEC trust anchor configuration files
E
environment.d(5) — Definition of user service environment
F
file-hierarchy(7) — File system hierarchy overview
H
halt(8) — Halt, power-off or reboot the machinehostname(5) — Local hostname configuration filehostnamectl(1) — Control the system hostnamehwdb(7) — Hardware Database
I
init(1) — systemd system and service managerinitrd-release(5) — Operating system identification
J
journal-remote.conf(5) — Configuration files for the service accepting remote journal uploadsjournal-remote.conf.d(5) — Configuration files for the service accepting remote journal uploadsjournal-upload.conf(5) — Configuration files for the journal upload servicejournal-upload.conf.d(5) — Configuration files for the journal upload servicejournalctl(1) — Query the systemd journaljournald.conf(5) — Journal service configuration filesjournald.conf.d(5) — Journal service configuration filesjournald [at] .conf(5) — Journal service configuration files
K
kernel-command-line(7) — Kernel command line parameterskernel-install(8) — Add and remove kernel and initramfs images to and from /boot
L
libnss_myhostname.so.2(8) — Hostname resolution for the locally configured system hostnamelibnss_mymachines.so.2(8) — Hostname resolution for local container instanceslibnss_resolve.so.2(8) — Hostname resolution via systemd-resolved.servicelibnss_systemd.so.2(8) — UNIX user and group name resolution for user/group lookup via Varlinklibudev(3) — API for enumerating and introspecting local devicesloader.conf(5) — Configuration file for systemd-bootlocale.conf(5) — Configuration file for locale settingslocalectl(1) — Control the system locale and keyboard layout settingslocaltime(5) — Local timezone configuration fileloginctl(1) — Control the systemd login managerlogind.conf(5) — Login manager configuration fileslogind.conf.d(5) — Login manager configuration files
M
machine-id(5) — Local machine ID configuration filemachine-info(5) — Local machine information filemachinectl(1) — Control the systemd machine managermodules-load.d(5) — Configure kernel modules to load at boot
N
networkctl(1) — Query the status of network linksnetworkd.conf(5) — Global Network configuration filesnetworkd.conf.d(5) — Global Network configuration filesnss-myhostname(8) — Hostname resolution for the locally configured system hostnamenss-mymachines(8) — Hostname resolution for local container instancesnss-resolve(8) — Hostname resolution via systemd-resolved.servicenss-systemd(8) — UNIX user and group name resolution for user/group lookup via Varlink
O
oomctl(1) — Analyze the state stored in systemd-oomdoomd.conf(5) — Global systemd-oomd configuration filesoomd.conf.d(5) — Global systemd-oomd configuration filesorg.freedesktop.hostname1(5) — The D-Bus interface of systemd-hostnamedorg.freedesktop.import1(5) — The D-Bus interface of systemd-importdorg.freedesktop.locale1(5) — The D-Bus interface of systemd-localedorg.freedesktop.LogControl1(5) — D-Bus interface to query and set logging configurationorg.freedesktop.login1(5) — The D-Bus interface of systemd-logindorg.freedesktop.machine1(5) — The D-Bus interface of systemd-machinedorg.freedesktop.oom1(5) — The D-Bus interface of systemd-oomdorg.freedesktop.portable1(5) — The D-Bus interface of systemd-portabledorg.freedesktop.resolve1(5) — The D-Bus interface of systemd-resolvedorg.freedesktop.systemd1(5) — The D-Bus interface of systemdorg.freedesktop.timedate1(5) — The D-Bus interface of systemd-timedatedos-release(5) — Operating system identification
P
pam_systemd(8) — Register user sessions in the systemd login managerportablectl(1) — Attach, detach or inspect portable service imagespoweroff(8) — Halt, power-off or reboot the machinepstore.conf(5) — PStore configuration filepstore.conf.d(5) — PStore configuration file
R
rc-local.service(8) — Compatibility generator and service to start /etc/rc.local during bootreboot(8) — Halt, power-off or reboot the machinerepart.d(5) — Partition Definition Files for Automatic Boot-Time Repartitioningresolvconf(1) — Resolve domain names, IPV4 and IPv6 addresses, DNS resource records, and services; introspect and reconfigure the DNS resolverresolvectl(1) — Resolve domain names, IPV4 and IPv6 addresses, DNS resource records, and services; introspect and reconfigure the DNS resolverresolved.conf(5) — Network Name Resolution configuration filesresolved.conf.d(5) — Network Name Resolution configuration filesrunlevel(8) — Print previous and current SysV runlevel
S
sd-boot(7) — A simple UEFI boot managersd-bus(3) — A lightweight D-Bus IPC client librarysd-bus-errors(3) — Standard D-Bus error namessd-daemon(3) — APIs for new-style daemonssd-event(3) — A generic event loop implementationsd-hwdb(3) — Read-only access to the hardware description databasesd-id128(3) — APIs for processing 128-bit IDssd-journal(3) — APIs for submitting and querying log entries to and from the journalsd-login(3) — APIs for tracking loginsSD_ALERT(3) — APIs for new-style daemonssd_booted(3) — Test whether the system is running the systemd init systemsd_bus_add_fallback(3) — Declare properties and methods for a D-Bus pathsd_bus_add_fallback_vtable(3) — Declare properties and methods for a D-Bus pathsd_bus_add_filter(3) — Declare properties and methods for a D-Bus pathsd_bus_add_match(3) — Add a match rule for incoming message dispatchingsd_bus_add_match_async(3) — Add a match rule for incoming message dispatchingsd_bus_add_node_enumerator(3) — Add a node enumerator for a D-Bus object path prefixsd_bus_add_object(3) — Declare properties and methods for a D-Bus pathsd_bus_add_object_manager(3) — Add a D-Bus object manager for a D-Bus object sub-treesd_bus_add_object_vtable(3) — Declare properties and methods for a D-Bus pathsd_bus_attach_event(3) — Attach a bus connection object to an event loopsd_bus_call(3) — Invoke a D-Bus method callsd_bus_call_async(3) — Invoke a D-Bus method callsd_bus_call_method(3) — Initialize a bus message object and invoke the corresponding D-Bus method callsd_bus_call_method_async(3) — Initialize a bus message object and invoke the corresponding D-Bus method callsd_bus_call_method_asyncv(3) — Initialize a bus message object and invoke the corresponding D-Bus method callsd_bus_call_methodv(3) — Initialize a bus message object and invoke the corresponding D-Bus method callsd_bus_can_send(3) — Check which types can be sent over a bus objectsd_bus_close(3) — Close and flush a bus connectionsd_bus_close_unref(3) — Create a new bus object and create or destroy references to itsd_bus_close_unrefp(3) — Create a new bus object and create or destroy references to itsd_bus_creds_get_audit_login_uid(3) — Retrieve fields from a credentials objectsd_bus_creds_get_audit_session_id(3) — Retrieve fields from a credentials objectsd_bus_creds_get_augmented_mask(3) — Retrieve credentials object for the specified PIDsd_bus_creds_get_cgroup(3) — Retrieve fields from a credentials objectsd_bus_creds_get_cmdline(3) — Retrieve fields from a credentials objectsd_bus_creds_get_comm(3) — Retrieve fields from a credentials objectsd_bus_creds_get_description(3) — Retrieve fields from a credentials objectsd_bus_creds_get_egid(3) — Retrieve fields from a credentials objectsd_bus_creds_get_euid(3) — Retrieve fields from a credentials objectsd_bus_creds_get_exe(3) — Retrieve fields from a credentials objectsd_bus_creds_get_fsgid(3) — Retrieve fields from a credentials objectsd_bus_creds_get_fsuid(3) — Retrieve fields from a credentials objectsd_bus_creds_get_gid(3) — Retrieve fields from a credentials objectsd_bus_creds_get_mask(3) — Retrieve credentials object for the specified PIDsd_bus_creds_get_owner_uid(3) — Retrieve fields from a credentials objectsd_bus_creds_get_pid(3) — Retrieve fields from a credentials objectsd_bus_creds_get_ppid(3) — Retrieve fields from a credentials objectsd_bus_creds_get_selinux_context(3) — Retrieve fields from a credentials objectsd_bus_creds_get_session(3) — Retrieve fields from a credentials objectsd_bus_creds_get_sgid(3) — Retrieve fields from a credentials objectsd_bus_creds_get_slice(3) — Retrieve fields from a credentials objectsd_bus_creds_get_suid(3) — Retrieve fields from a credentials objectsd_bus_creds_get_supplementary_gids(3) — Retrieve fields from a credentials objectsd_bus_creds_get_tid(3) — Retrieve fields from a credentials objectsd_bus_creds_get_tid_comm(3) — Retrieve fields from a credentials objectsd_bus_creds_get_tty(3) — Retrieve fields from a credentials objectsd_bus_creds_get_uid(3) — Retrieve fields from a credentials objectsd_bus_creds_get_unique_name(3) — Retrieve fields from a credentials objectsd_bus_creds_get_unit(3) — Retrieve fields from a credentials objectsd_bus_creds_get_user_slice(3) — Retrieve fields from a credentials objectsd_bus_creds_get_user_unit(3) — Retrieve fields from a credentials objectsd_bus_creds_get_well_known_names(3) — Retrieve fields from a credentials objectsd_bus_creds_has_bounding_cap(3) — Retrieve fields from a credentials objectsd_bus_creds_has_effective_cap(3) — Retrieve fields from a credentials objectsd_bus_creds_has_inheritable_cap(3) — Retrieve fields from a credentials objectsd_bus_creds_has_permitted_cap(3) — Retrieve fields from a credentials objectsd_bus_creds_new_from_pid(3) — Retrieve credentials object for the specified PIDsd_bus_creds_ref(3) — Retrieve credentials object for the specified PIDsd_bus_creds_unref(3) — Retrieve credentials object for the specified PIDsd_bus_creds_unrefp(3) — Retrieve credentials object for the specified PIDsd_bus_default(3) — Acquire a connection to a system or user bussd_bus_default_flush_close(3) — Close and flush a bus connectionsd_bus_default_system(3) — Acquire a connection to a system or user bussd_bus_default_user(3) — Acquire a connection to a system or user bussd_bus_destroy_t(3) — Define the callback function for resource cleanupsd_bus_detach_event(3) — Attach a bus connection object to an event loopsd_bus_emit_interfaces_added(3) — Convenience functions for emitting (standard) D-Bus signalssd_bus_emit_interfaces_added_strv(3) — Convenience functions for emitting (standard) D-Bus signalssd_bus_emit_interfaces_removed(3) — Convenience functions for emitting (standard) D-Bus signalssd_bus_emit_interfaces_removed_strv(3) — Convenience functions for emitting (standard) D-Bus signalssd_bus_emit_object_added(3) — Convenience functions for emitting (standard) D-Bus signalssd_bus_emit_object_removed(3) — Convenience functions for emitting (standard) D-Bus signalssd_bus_emit_properties_changed(3) — Convenience functions for emitting (standard) D-Bus signalssd_bus_emit_properties_changed_strv(3) — Convenience functions for emitting (standard) D-Bus signalssd_bus_emit_signal(3) — Convenience functions for emitting (standard) D-Bus signalssd_bus_emit_signalv(3) — Convenience functions for emitting (standard) D-Bus signalssd_bus_enqueue_for_read(3) — Re-enqueue a bus message on a bus connection, for readingsd_bus_error(3) — sd-bus error handlingSD_BUS_ERROR_ACCESS_DENIED(3) — Standard D-Bus error namessd_bus_error_add_map(3) — Additional sd-dbus error mappingsSD_BUS_ERROR_ADDRESS_IN_USE(3) — Standard D-Bus error namesSD_BUS_ERROR_AUTH_FAILED(3) — Standard D-Bus error namesSD_BUS_ERROR_BAD_ADDRESS(3) — Standard D-Bus error namessd_bus_error_copy(3) — sd-bus error handlingSD_BUS_ERROR_DISCONNECTED(3) — Standard D-Bus error namesSD_BUS_ERROR_END(3) — Additional sd-dbus error mappingsSD_BUS_ERROR_FAILED(3) — Standard D-Bus error namesSD_BUS_ERROR_FILE_EXISTS(3) — Standard D-Bus error namesSD_BUS_ERROR_FILE_NOT_FOUND(3) — Standard D-Bus error namessd_bus_error_free(3) — sd-bus error handlingsd_bus_error_get_errno(3) — sd-bus error handlingsd_bus_error_has_name(3) — sd-bus error handlingsd_bus_error_has_names(3) — sd-bus error handlingsd_bus_error_has_names_sentinel(3) — sd-bus error handlingSD_BUS_ERROR_INCONSISTENT_MESSAGE(3) — Standard D-Bus error namesSD_BUS_ERROR_INTERACTIVE_AUTHORIZATION_REQUIRED(3) — Standard D-Bus error namesSD_BUS_ERROR_INVALID_ARGS(3) — Standard D-Bus error namesSD_BUS_ERROR_INVALID_SIGNATURE(3) — Standard D-Bus error namesSD_BUS_ERROR_IO_ERROR(3) — Standard D-Bus error namessd_bus_error_is_set(3) — sd-bus error handlingSD_BUS_ERROR_LIMITS_EXCEEDED(3) — Standard D-Bus error namesSD_BUS_ERROR_MAKE_CONST(3) — sd-bus error handlingsd_bus_error_map(3) — Additional sd-dbus error mappingsSD_BUS_ERROR_MAP(3) — Additional sd-dbus error mappingsSD_BUS_ERROR_MATCH_RULE_INVALID(3) — Standard D-Bus error namesSD_BUS_ERROR_MATCH_RULE_NOT_FOUND(3) — Standard D-Bus error namessd_bus_error_move(3) — sd-bus error handlingSD_BUS_ERROR_NAME_HAS_NO_OWNER(3) — Standard D-Bus error namesSD_BUS_ERROR_NO_MEMORY(3) — Standard D-Bus error namesSD_BUS_ERROR_NO_NETWORK(3) — Standard D-Bus error namesSD_BUS_ERROR_NO_REPLY(3) — Standard D-Bus error namesSD_BUS_ERROR_NO_SERVER(3) — Standard D-Bus error namesSD_BUS_ERROR_NOT_SUPPORTED(3) — Standard D-Bus error namesSD_BUS_ERROR_NULL(3) — sd-bus error handlingSD_BUS_ERROR_PROPERTY_READ_ONLY(3) — Standard D-Bus error namesSD_BUS_ERROR_SERVICE_UNKNOWN(3) — Standard D-Bus error namessd_bus_error_set(3) — sd-bus error handlingsd_bus_error_set_const(3) — sd-bus error handlingsd_bus_error_set_errno(3) — sd-bus error handlingsd_bus_error_set_errnof(3) — sd-bus error handlingsd_bus_error_set_errnofv(3) — sd-bus error handlingsd_bus_error_setf(3) — sd-bus error handlingSD_BUS_ERROR_TIMEOUT(3) — Standard D-Bus error namesSD_BUS_ERROR_UNIX_PROCESS_ID_UNKNOWN(3) — Standard D-Bus error namesSD_BUS_ERROR_UNKNOWN_INTERFACE(3) — Standard D-Bus error namesSD_BUS_ERROR_UNKNOWN_METHOD(3) — Standard D-Bus error namesSD_BUS_ERROR_UNKNOWN_OBJECT(3) — Standard D-Bus error namesSD_BUS_ERROR_UNKNOWN_PROPERTY(3) — Standard D-Bus error namessd_bus_flush(3) — Close and flush a bus connectionsd_bus_flush_close_unref(3) — Create a new bus object and create or destroy references to itsd_bus_flush_close_unrefp(3) — Create a new bus object and create or destroy references to itsd_bus_get_address(3) — Set or query the address of the bus connectionsd_bus_get_allow_interactive_authorization(3) — Set or query properties of a bus objectsd_bus_get_bus_id(3) — Configure connection mode for a bus objectsd_bus_get_close_on_exit(3) — Control whether to close the bus connection during the event loop exit phasesd_bus_get_connected_signal(3) — Control emission of local connection establishment signal on bus connectionssd_bus_get_creds_mask(3) — Control feature negotiation on bus connectionssd_bus_get_current_handler(3) — Query information of the callback a bus object is currently runningsd_bus_get_current_message(3) — Query information of the callback a bus object is currently runningsd_bus_get_current_slot(3) — Query information of the callback a bus object is currently runningsd_bus_get_current_userdata(3) — Query information of the callback a bus object is currently runningsd_bus_get_description(3) — Set or query properties of a bus objectsd_bus_get_event(3) — Attach a bus connection object to an event loopsd_bus_get_events(3) — Get the file descriptor, I/O events and timeout to wait for from a message bus objectsd_bus_get_exit_on_disconnect(3) — Control the exit behavior when the bus object disconnectssd_bus_get_fd(3) — Get the file descriptor, I/O events and timeout to wait for from a message bus objectsd_bus_get_method_call_timeout(3) — Set or query the default D-Bus method call timeout of a bus objectsd_bus_get_n_queued_read(3) — Get the number of pending bus messages in the read and write queues of a bus connection objectsd_bus_get_n_queued_write(3) — Get the number of pending bus messages in the read and write queues of a bus connection objectsd_bus_get_name_creds(3) — Query bus client credentialssd_bus_get_name_machine_id(3) — Retrieve a bus client’s machine identitysd_bus_get_owner_creds(3) — Query bus client credentialssd_bus_get_property(3) — Set or query D-Bus service propertiessd_bus_get_property_string(3) — Set or query D-Bus service propertiessd_bus_get_property_strv(3) — Set or query D-Bus service propertiessd_bus_get_property_trivial(3) — Set or query D-Bus service propertiessd_bus_get_scope(3) — Set or query properties of a bus objectsd_bus_get_sender(3) — Configure default sender for outgoing messagessd_bus_get_tid(3) — Set or query properties of a bus objectsd_bus_get_timeout(3) — Get the file descriptor, I/O events and timeout to wait for from a message bus objectsd_bus_get_unique_name(3) — Set or query properties of a bus objectsd_bus_get_watch_bind(3) — Control socket binding watching on bus connectionssd_bus_interface_name_is_valid(3) — Check if a string is a valid bus name or object pathsd_bus_is_anonymous(3) — Set or query properties of a bus objectsd_bus_is_bus_client(3) — Configure connection mode for a bus objectsd_bus_is_monitor(3) — Configure connection mode for a bus objectsd_bus_is_open(3) — Check whether the bus connection is open or readysd_bus_is_ready(3) — Check whether the bus connection is open or readysd_bus_is_server(3) — Configure connection mode for a bus objectsd_bus_is_trusted(3) — Set or query properties of a bus objectsd_bus_list_names(3) — Retrieve information about registered names on a bussd_bus_match_signal(3) — Add a match rule for incoming message dispatchingsd_bus_match_signal_async(3) — Add a match rule for incoming message dispatchingsd_bus_member_name_is_valid(3) — Check if a string is a valid bus name or object pathsd_bus_message_append(3) — Attach fields to a D-Bus message based on a type stringsd_bus_message_append_array(3) — Append an array of fields to a D-Bus messagesd_bus_message_append_array_iovec(3) — Append an array of fields to a D-Bus messagesd_bus_message_append_array_memfd(3) — Append an array of fields to a D-Bus messagesd_bus_message_append_array_space(3) — Append an array of fields to a D-Bus messagesd_bus_message_append_basic(3) — Attach a single field to a messagesd_bus_message_append_string_iovec(3) — Attach a string to a messagesd_bus_message_append_string_memfd(3) — Attach a string to a messagesd_bus_message_append_string_space(3) — Attach a string to a messagesd_bus_message_append_strv(3) — Attach an array of strings to a messagesd_bus_message_appendv(3) — Attach fields to a D-Bus message based on a type stringsd_bus_message_at_end(3) — Check if a message has been fully readsd_bus_message_close_container(3) — Create and move between containers in D-Bus messagessd_bus_message_copy(3) — Copy the contents of one message to anothersd_bus_message_dump(3) — Produce a string representation of a message for debugging purposessd_bus_message_enter_container(3) — Create and move between containers in D-Bus messagessd_bus_message_exit_container(3) — Create and move between containers in D-Bus messagessd_bus_message_get_allow_interactive_authorization(3) — Set and query bus message metadatasd_bus_message_get_auto_start(3) — Set and query bus message metadatasd_bus_message_get_bus(3) — Create a new bus message object and create or destroy references to itsd_bus_message_get_cookie(3) — Returns the transaction cookie of a messagesd_bus_message_get_creds(3) — Query bus message addressing/credentials metadatasd_bus_message_get_destination(3) — Set and query bus message addressing informationsd_bus_message_get_errno(3) — Query bus message addressing/credentials metadatasd_bus_message_get_error(3) — Query bus message addressing/credentials metadatasd_bus_message_get_expect_reply(3) — Set and query bus message metadatasd_bus_message_get_interface(3) — Set and query bus message addressing informationsd_bus_message_get_member(3) — Set and query bus message addressing informationsd_bus_message_get_monotonic_usec(3) — Retrieve the sender timestamps and sequence number of a messagesd_bus_message_get_path(3) — Set and query bus message addressing informationsd_bus_message_get_realtime_usec(3) — Retrieve the sender timestamps and sequence number of a messagesd_bus_message_get_reply_cookie(3) — Returns the transaction cookie of a messagesd_bus_message_get_sender(3) — Set and query bus message addressing informationsd_bus_message_get_seqnum(3) — Retrieve the sender timestamps and sequence number of a messagesd_bus_message_get_signature(3) — Query bus message signaturesd_bus_message_get_type(3) — Query bus message addressing/credentials metadatasd_bus_message_has_signature(3) — Query bus message signaturesd_bus_message_is_empty(3) — Query bus message signaturesd_bus_message_is_method_call(3) — Query bus message addressing/credentials metadatasd_bus_message_is_method_error(3) — Query bus message addressing/credentials metadatasd_bus_message_is_signal(3) — Query bus message addressing/credentials metadataSD_BUS_MESSAGE_METHOD_CALL(3) — Create a new bus message object and create or destroy references to itSD_BUS_MESSAGE_METHOD_ERROR(3) — Create a new bus message object and create or destroy references to itSD_BUS_MESSAGE_METHOD_RETURN(3) — Create a new bus message object and create or destroy references to itsd_bus_message_new(3) — Create a new bus message object and create or destroy references to itsd_bus_message_new_method_call(3) — Create a method call messagesd_bus_message_new_method_errno(3) — Create an error reply for a method callsd_bus_message_new_method_errnof(3) — Create an error reply for a method callsd_bus_message_new_method_error(3) — Create an error reply for a method callsd_bus_message_new_method_errorf(3) — Create an error reply for a method callsd_bus_message_new_method_return(3) — Create a method call messagesd_bus_message_new_signal(3) — Create a signal messagesd_bus_message_open_container(3) — Create and move between containers in D-Bus messagessd_bus_message_peek_type(3) — Read a sequence of values from a messagesd_bus_message_read(3) — Read a sequence of values from a messagesd_bus_message_read_array(3) — Access an array of elements in a messagesd_bus_message_read_basic(3) — Read a basic type from a messagesd_bus_message_read_strv(3) — Access an array of strings in a messagesd_bus_message_readv(3) — Read a sequence of values from a messagesd_bus_message_ref(3) — Create a new bus message object and create or destroy references to itsd_bus_message_rewind(3) — Return to beginning of message or current containersd_bus_message_seal(3) — Prepare a D-Bus message for transmissionsd_bus_message_send(3) — Queue a D-Bus message for transfersd_bus_message_sensitive(3) — Mark a message object as containing sensitive datasd_bus_message_set_allow_interactive_authorization(3) — Set and query bus message metadatasd_bus_message_set_auto_start(3) — Set and query bus message metadatasd_bus_message_set_destination(3) — Set and query bus message addressing informationsd_bus_message_set_expect_reply(3) — Set and query bus message metadatasd_bus_message_set_sender(3) — Set and query bus message addressing informationSD_BUS_MESSAGE_SIGNAL(3) — Create a new bus message object and create or destroy references to itsd_bus_message_skip(3) — Skip elements in a bus messagesd_bus_message_unref(3) — Create a new bus message object and create or destroy references to itsd_bus_message_unrefp(3) — Create a new bus message object and create or destroy references to itsd_bus_message_verify_type(3) — Check if the message has specified type at the current locationSD_BUS_METHOD(3) — Declare properties and methods for a D-Bus pathSD_BUS_METHOD_WITH_NAMES(3) — Declare properties and methods for a D-Bus pathSD_BUS_METHOD_WITH_NAMES_OFFSET(3) — Declare properties and methods for a D-Bus pathSD_BUS_METHOD_WITH_OFFSET(3) — Declare properties and methods for a D-Bus pathsd_bus_negotiate_creds(3) — Control feature negotiation on bus connectionssd_bus_negotiate_fds(3) — Control feature negotiation on bus connectionssd_bus_negotiate_timestamp(3) — Control feature negotiation on bus connectionssd_bus_new(3) — Create a new bus object and create or destroy references to itsd_bus_object_path_is_valid(3) — Check if a string is a valid bus name or object pathsd_bus_open(3) — Acquire a connection to a system or user bussd_bus_open_system(3) — Acquire a connection to a system or user bussd_bus_open_system_machine(3) — Acquire a connection to a system or user bussd_bus_open_system_remote(3) — Acquire a connection to a system or user bussd_bus_open_system_with_description(3) — Acquire a connection to a system or user bussd_bus_open_user(3) — Acquire a connection to a system or user bussd_bus_open_user_machine(3) — Acquire a connection to a system or user bussd_bus_open_user_with_description(3) — Acquire a connection to a system or user bussd_bus_open_with_description(3) — Acquire a connection to a system or user busSD_BUS_PARAM(3) — Declare properties and methods for a D-Bus pathsd_bus_path_decode(3) — Convert an external identifier into an object path and backsd_bus_path_decode_many(3) — Convert an external identifier into an object path and backsd_bus_path_encode(3) — Convert an external identifier into an object path and backsd_bus_path_encode_many(3) — Convert an external identifier into an object path and backsd_bus_process(3) — Drive the connectionSD_BUS_PROPERTY(3) — Declare properties and methods for a D-Bus pathsd_bus_query_sender_creds(3) — Query bus message sender credentials/privilegessd_bus_query_sender_privilege(3) — Query bus message sender credentials/privilegessd_bus_ref(3) — Create a new bus object and create or destroy references to itsd_bus_release_name(3) — Request or release a well-known service name on a bussd_bus_release_name_async(3) — Request or release a well-known service name on a bussd_bus_reply_method_errno(3) — Reply with an error to a D-Bus method callsd_bus_reply_method_errnof(3) — Reply with an error to a D-Bus method callsd_bus_reply_method_errnofv(3) — Reply with an error to a D-Bus method callsd_bus_reply_method_error(3) — Reply with an error to a D-Bus method callsd_bus_reply_method_errorf(3) — Reply with an error to a D-Bus method callsd_bus_reply_method_errorfv(3) — Reply with an error to a D-Bus method callsd_bus_reply_method_return(3) — Reply to a D-Bus method callsd_bus_reply_method_returnv(3) — Reply to a D-Bus method callsd_bus_request_name(3) — Request or release a well-known service name on a bussd_bus_request_name_async(3) — Request or release a well-known service name on a bussd_bus_send(3) — Queue a D-Bus message for transfersd_bus_send_to(3) — Queue a D-Bus message for transfersd_bus_service_name_is_valid(3) — Check if a string is a valid bus name or object pathsd_bus_set_address(3) — Set or query the address of the bus connectionsd_bus_set_allow_interactive_authorization(3) — Set or query properties of a bus objectsd_bus_set_anonymous(3) — Set or query properties of a bus objectsd_bus_set_bus_client(3) — Configure connection mode for a bus objectsd_bus_set_close_on_exit(3) — Control whether to close the bus connection during the event loop exit phasesd_bus_set_connected_signal(3) — Control emission of local connection establishment signal on bus connectionssd_bus_set_description(3) — Set or query properties of a bus objectsd_bus_set_exec(3) — Set or query the address of the bus connectionsd_bus_set_exit_on_disconnect(3) — Control the exit behavior when the bus object disconnectssd_bus_set_fd(3) — Set the file descriptors to use for bus communicationsd_bus_set_method_call_timeout(3) — Set or query the default D-Bus method call timeout of a bus objectsd_bus_set_monitor(3) — Configure connection mode for a bus objectsd_bus_set_property(3) — Set or query D-Bus service propertiessd_bus_set_propertyv(3) — Set or query D-Bus service propertiessd_bus_set_sender(3) — Configure default sender for outgoing messagessd_bus_set_server(3) — Configure connection mode for a bus objectsd_bus_set_trusted(3) — Set or query properties of a bus objectsd_bus_set_watch_bind(3) — Control socket binding watching on bus connectionsSD_BUS_SIGNAL(3) — Declare properties and methods for a D-Bus pathSD_BUS_SIGNAL_WITH_NAMES(3) — Declare properties and methods for a D-Bus pathsd_bus_slot_get_bus(3) — Query information attached to a bus slot objectsd_bus_slot_get_current_handler(3) — Query information attached to a bus slot objectsd_bus_slot_get_current_message(3) — Query information attached to a bus slot objectsd_bus_slot_get_current_userdata(3) — Query information attached to a bus slot objectsd_bus_slot_get_description(3) — Set or query the description of bus slot objectssd_bus_slot_get_destroy_callback(3) — Define the callback function for resource cleanupsd_bus_slot_get_floating(3) — Control whether a bus slot object is "floating"sd_bus_slot_get_userdata(3) — Set and query the value in the "userdata" fieldsd_bus_slot_ref(3) — Create and destroy references to a bus slot objectsd_bus_slot_set_description(3) — Set or query the description of bus slot objectssd_bus_slot_set_destroy_callback(3) — Define the callback function for resource cleanupsd_bus_slot_set_floating(3) — Control whether a bus slot object is "floating"sd_bus_slot_set_userdata(3) — Set and query the value in the "userdata" fieldsd_bus_slot_unref(3) — Create and destroy references to a bus slot objectsd_bus_slot_unrefp(3) — Create and destroy references to a bus slot objectsd_bus_start(3) — Initiate a bus connection to the D-bus broker daemonsd_bus_track_add_name(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking objectsd_bus_track_add_sender(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking objectsd_bus_track_contains(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking objectsd_bus_track_count(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking objectsd_bus_track_count_name(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking objectsd_bus_track_count_sender(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking objectsd_bus_track_first(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking objectsd_bus_track_get_bus(3) — Track bus peerssd_bus_track_get_destroy_callback(3) — Define the callback function for resource cleanupsd_bus_track_get_recursive(3) — Track bus peerssd_bus_track_get_userdata(3) — Track bus peerssd_bus_track_new(3) — Track bus peerssd_bus_track_next(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking objectsd_bus_track_ref(3) — Track bus peerssd_bus_track_remove_name(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking objectsd_bus_track_remove_sender(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking objectsd_bus_track_set_destroy_callback(3) — Define the callback function for resource cleanupsd_bus_track_set_recursive(3) — Track bus peerssd_bus_track_set_userdata(3) — Track bus peerssd_bus_track_unref(3) — Track bus peerssd_bus_track_unrefp(3) — Track bus peerssd_bus_unref(3) — Create a new bus object and create or destroy references to itsd_bus_unrefp(3) — Create a new bus object and create or destroy references to itSD_BUS_VTABLE_CAPABILITY(3) — Declare properties and methods for a D-Bus pathSD_BUS_VTABLE_END(3) — Declare properties and methods for a D-Bus pathSD_BUS_VTABLE_START(3) — Declare properties and methods for a D-Bus pathsd_bus_wait(3) — Wait for I/O on a bus connectionSD_BUS_WRITABLE_PROPERTY(3) — Declare properties and methods for a D-Bus pathSD_CRIT(3) — APIs for new-style daemonsSD_DEBUG(3) — APIs for new-style daemonsSD_EMERG(3) — APIs for new-style daemonsSD_ERR(3) — APIs for new-style daemonssd_event(3) — Acquire and release an event loop objectsd_event_add_child(3) — Add a child process state change event source to an event loopsd_event_add_child_pidfd(3) — Add a child process state change event source to an event loopsd_event_add_defer(3) — Add static event sources to an event loopsd_event_add_exit(3) — Add static event sources to an event loopsd_event_add_inotify(3) — Add an "inotify" file system inode event source to an event loopsd_event_add_io(3) — Add an I/O event source to an event loopsd_event_add_post(3) — Add static event sources to an event loopsd_event_add_signal(3) — Add a UNIX process signal event source to an event loopsd_event_add_time(3) — Add a timer event source to an event loopsd_event_add_time_relative(3) — Add a timer event source to an event loopSD_EVENT_ARMED(3) — Low-level event loop operationssd_event_child_handler_t(3) — Add a child process state change event source to an event loopsd_event_default(3) — Acquire and release an event loop objectsd_event_destroy_t(3) — Define the callback function for resource cleanupsd_event_dispatch(3) — Low-level event loop operationssd_event_exit(3) — Ask the event loop to exitSD_EVENT_EXITING(3) — Low-level event loop operationsSD_EVENT_FINISHED(3) — Low-level event loop operationssd_event_get_exit_code(3) — Ask the event loop to exitsd_event_get_fd(3) — Obtain a file descriptor to poll for event loop eventssd_event_get_iteration(3) — Low-level event loop operationssd_event_get_state(3) — Low-level event loop operationssd_event_get_tid(3) — Acquire and release an event loop objectsd_event_get_watchdog(3) — Enable event loop watchdog supportsd_event_handler_t(3) — Add static event sources to an event loopSD_EVENT_INITIAL(3) — Low-level event loop operationssd_event_inotify_handler_t(3) — Add an "inotify" file system inode event source to an event loopsd_event_io_handler_t(3) — Add an I/O event source to an event loopsd_event_loop(3) — Run an event loopsd_event_new(3) — Acquire and release an event loop objectsd_event_now(3) — Retrieve current event loop iteration timestampSD_EVENT_OFF(3) — Enable or disable event sourcesSD_EVENT_ON(3) — Enable or disable event sourcesSD_EVENT_ONESHOT(3) — Enable or disable event sourcesSD_EVENT_PENDING(3) — Low-level event loop operationssd_event_prepare(3) — Low-level event loop operationsSD_EVENT_PREPARING(3) — Low-level event loop operationsSD_EVENT_PRIORITY_IDLE(3) — Set or retrieve the priority of event sourcesSD_EVENT_PRIORITY_IMPORTANT(3) — Set or retrieve the priority of event sourcesSD_EVENT_PRIORITY_NORMAL(3) — Set or retrieve the priority of event sourcessd_event_ref(3) — Acquire and release an event loop objectsd_event_run(3) — Run an event loopSD_EVENT_RUNNING(3) — Low-level event loop operationssd_event_set_watchdog(3) — Enable event loop watchdog supportsd_event_signal_handler_t(3) — Add a UNIX process signal event source to an event loopsd_event_source(3) — Add an I/O event source to an event loopsd_event_source_disable_unref(3) — Increase or decrease event source reference counterssd_event_source_disable_unrefp(3) — Increase or decrease event source reference counterssd_event_source_get_child_pid(3) — Add a child process state change event source to an event loopsd_event_source_get_child_pidfd(3) — Add a child process state change event source to an event loopsd_event_source_get_child_pidfd_own(3) — Add a child process state change event source to an event loopsd_event_source_get_child_process_own(3) — Add a child process state change event source to an event loopsd_event_source_get_description(3) — Set or retrieve descriptive names of event sourcessd_event_source_get_destroy_callback(3) — Define the callback function for resource cleanupsd_event_source_get_enabled(3) — Enable or disable event sourcessd_event_source_get_event(3) — Retrieve the event loop of an event sourcesd_event_source_get_exit_on_failure(3) — Set or retrieve the exit-on-failure feature of event sourcessd_event_source_get_floating(3) — Set or retrieve ‘floating’ state of event sourcessd_event_source_get_inotify_mask(3) — Add an "inotify" file system inode event source to an event loopsd_event_source_get_io_events(3) — Add an I/O event source to an event loopsd_event_source_get_io_fd(3) — Add an I/O event source to an event loopsd_event_source_get_io_fd_own(3) — Add an I/O event source to an event loopsd_event_source_get_io_revents(3) — Add an I/O event source to an event loopsd_event_source_get_pending(3) — Determine pending state of event sourcessd_event_source_get_priority(3) — Set or retrieve the priority of event sourcessd_event_source_get_ratelimit(3) — Configure rate limiting on event sourcessd_event_source_get_signal(3) — Add a UNIX process signal event source to an event loopsd_event_source_get_time(3) — Add a timer event source to an event loopsd_event_source_get_time_accuracy(3) — Add a timer event source to an event loopsd_event_source_get_time_clock(3) — Add a timer event source to an event loopsd_event_source_get_userdata(3) — Set or retrieve user data pointer of event sourcessd_event_source_is_ratelimited(3) — Configure rate limiting on event sourcessd_event_source_ref(3) — Increase or decrease event source reference counterssd_event_source_send_child_signal(3) — Add a child process state change event source to an event loopsd_event_source_set_child_pidfd_own(3) — Add a child process state change event source to an event loopsd_event_source_set_child_process_own(3) — Add a child process state change event source to an event loopsd_event_source_set_description(3) — Set or retrieve descriptive names of event sourcessd_event_source_set_destroy_callback(3) — Define the callback function for resource cleanupsd_event_source_set_enabled(3) — Enable or disable event sourcessd_event_source_set_exit_on_failure(3) — Set or retrieve the exit-on-failure feature of event sourcessd_event_source_set_floating(3) — Set or retrieve ‘floating’ state of event sourcessd_event_source_set_io_events(3) — Add an I/O event source to an event loopsd_event_source_set_io_fd(3) — Add an I/O event source to an event loopsd_event_source_set_io_fd_own(3) — Add an I/O event source to an event loopsd_event_source_set_prepare(3) — Set a preparation callback for event sourcessd_event_source_set_priority(3) — Set or retrieve the priority of event sourcessd_event_source_set_ratelimit(3) — Configure rate limiting on event sourcessd_event_source_set_time(3) — Add a timer event source to an event loopsd_event_source_set_time_accuracy(3) — Add a timer event source to an event loopsd_event_source_set_time_relative(3) — Add a timer event source to an event loopsd_event_source_set_userdata(3) — Set or retrieve user data pointer of event sourcessd_event_source_unref(3) — Increase or decrease event source reference counterssd_event_source_unrefp(3) — Increase or decrease event source reference counterssd_event_time_handler_t(3) — Add a timer event source to an event loopsd_event_unref(3) — Acquire and release an event loop objectsd_event_unrefp(3) — Acquire and release an event loop objectsd_event_wait(3) — Low-level event loop operationssd_get_machine_names(3) — Determine available seats, sessions, logged in users and virtual machines/containerssd_get_seats(3) — Determine available seats, sessions, logged in users and virtual machines/containerssd_get_sessions(3) — Determine available seats, sessions, logged in users and virtual machines/containerssd_get_uids(3) — Determine available seats, sessions, logged in users and virtual machines/containerssd_hwdb_enumerate(3) — Seek to a location in hwdb or access entriesSD_HWDB_FOREACH_PROPERTY(3) — Seek to a location in hwdb or access entriessd_hwdb_get(3) — Seek to a location in hwdb or access entriessd_hwdb_new(3) — Create a new hwdb object and create or destroy references to itsd_hwdb_new_from_path(3) — Create a new hwdb object and create or destroy references to itsd_hwdb_ref(3) — Create a new hwdb object and create or destroy references to itsd_hwdb_seek(3) — Seek to a location in hwdb or access entriessd_hwdb_unref(3) — Create a new hwdb object and create or destroy references to itSD_ID128_ALLF(3) — APIs for processing 128-bit IDsSD_ID128_CONST_STR(3) — APIs for processing 128-bit IDssd_id128_equal(3) — APIs for processing 128-bit IDsSD_ID128_FORMAT_STR(3) — APIs for processing 128-bit IDsSD_ID128_FORMAT_VAL(3) — APIs for processing 128-bit IDssd_id128_from_string(3) — Format or parse 128-bit IDs as stringssd_id128_get_boot(3) — Retrieve 128-bit IDssd_id128_get_boot_app_specific(3) — Retrieve 128-bit IDssd_id128_get_invocation(3) — Retrieve 128-bit IDssd_id128_get_machine(3) — Retrieve 128-bit IDssd_id128_get_machine_app_specific(3) — Retrieve 128-bit IDssd_id128_in_set(3) — APIs for processing 128-bit IDssd_id128_in_set_sentinel(3) — APIs for processing 128-bit IDssd_id128_in_setv(3) — APIs for processing 128-bit IDssd_id128_is_allf(3) — APIs for processing 128-bit IDssd_id128_is_null(3) — APIs for processing 128-bit IDsSD_ID128_MAKE(3) — APIs for processing 128-bit IDsSD_ID128_MAKE_STR(3) — APIs for processing 128-bit IDsSD_ID128_MAKE_UUID_STR(3) — APIs for processing 128-bit IDsSD_ID128_NULL(3) — APIs for processing 128-bit IDssd_id128_randomize(3) — Generate 128-bit IDssd_id128_t(3) — APIs for processing 128-bit IDssd_id128_to_string(3) — Format or parse 128-bit IDs as stringsSD_ID128_UUID_FORMAT_STR(3) — APIs for processing 128-bit IDsSD_INFO(3) — APIs for new-style daemonssd_is_fifo(3) — Check the type of a file descriptorsd_is_mq(3) — Check the type of a file descriptorsd_is_socket(3) — Check the type of a file descriptorsd_is_socket_inet(3) — Check the type of a file descriptorsd_is_socket_sockaddr(3) — Check the type of a file descriptorsd_is_socket_unix(3) — Check the type of a file descriptorsd_is_special(3) — Check the type of a file descriptorsd_journal(3) — Open the system journal for readingsd_journal_add_conjunction(3) — Add or remove entry matchessd_journal_add_disjunction(3) — Add or remove entry matchessd_journal_add_match(3) — Add or remove entry matchesSD_JOURNAL_ALL_NAMESPACES(3) — Open the system journal for readingSD_JOURNAL_APPEND(3) — Journal change notification interfacesd_journal_close(3) — Open the system journal for readingSD_JOURNAL_CURRENT_USER(3) — Open the system journal for readingsd_journal_enumerate_available_data(3) — Read data fields from the current journal entrysd_journal_enumerate_available_unique(3) — Read unique data fields from the journalsd_journal_enumerate_data(3) — Read data fields from the current journal entrysd_journal_enumerate_fields(3) — Read used field names from the journalsd_journal_enumerate_unique(3) — Read unique data fields from the journalsd_journal_flush_matches(3) — Add or remove entry matchesSD_JOURNAL_FOREACH(3) — Advance or set back the read pointer in the journalSD_JOURNAL_FOREACH_BACKWARDS(3) — Advance or set back the read pointer in the journalSD_JOURNAL_FOREACH_DATA(3) — Read data fields from the current journal entrySD_JOURNAL_FOREACH_FIELD(3) — Read used field names from the journalSD_JOURNAL_FOREACH_UNIQUE(3) — Read unique data fields from the journalsd_journal_get_catalog(3) — Retrieve message catalog entrysd_journal_get_catalog_for_message_id(3) — Retrieve message catalog entrysd_journal_get_cursor(3) — Get cursor string for or test cursor string against the current journal entrysd_journal_get_cutoff_monotonic_usec(3) — Read cut-off timestamps from the current journal entrysd_journal_get_cutoff_realtime_usec(3) — Read cut-off timestamps from the current journal entrysd_journal_get_data(3) — Read data fields from the current journal entrysd_journal_get_data_threshold(3) — Read data fields from the current journal entrysd_journal_get_events(3) — Journal change notification interfacesd_journal_get_fd(3) — Journal change notification interfacesd_journal_get_monotonic_usec(3) — Read timestamps from the current journal entrysd_journal_get_realtime_usec(3) — Read timestamps from the current journal entrysd_journal_get_timeout(3) — Journal change notification interfacesd_journal_get_usage(3) — Journal disk usagesd_journal_has_persistent_files(3) — Query availability of runtime or persistent journal filessd_journal_has_runtime_files(3) — Query availability of runtime or persistent journal filesSD_JOURNAL_INCLUDE_DEFAULT_NAMESPACE(3) — Open the system journal for readingSD_JOURNAL_INVALIDATE(3) — Journal change notification interfaceSD_JOURNAL_LOCAL_ONLY(3) — Open the system journal for readingsd_journal_next(3) — Advance or set back the read pointer in the journalsd_journal_next_skip(3) — Advance or set back the read pointer in the journalSD_JOURNAL_NOP(3) — Journal change notification interfacesd_journal_open(3) — Open the system journal for readingsd_journal_open_directory(3) — Open the system journal for readingsd_journal_open_directory_fd(3) — Open the system journal for readingsd_journal_open_files(3) — Open the system journal for readingsd_journal_open_files_fd(3) — Open the system journal for readingsd_journal_open_namespace(3) — Open the system journal for readingSD_JOURNAL_OS_ROOT(3) — Open the system journal for readingsd_journal_perror(3) — Submit log entries to the journalsd_journal_perror_with_location(3) — Submit log entries to the journalsd_journal_previous(3) — Advance or set back the read pointer in the journalsd_journal_previous_skip(3) — Advance or set back the read pointer in the journalsd_journal_print(3) — Submit log entries to the journalsd_journal_print_with_location(3) — Submit log entries to the journalsd_journal_printv(3) — Submit log entries to the journalsd_journal_printv_with_location(3) — Submit log entries to the journalsd_journal_process(3) — Journal change notification interfacesd_journal_query_unique(3) — Read unique data fields from the journalsd_journal_reliable_fd(3) — Journal change notification interfacesd_journal_restart_data(3) — Read data fields from the current journal entrysd_journal_restart_fields(3) — Read used field names from the journalsd_journal_restart_unique(3) — Read unique data fields from the journalSD_JOURNAL_RUNTIME_ONLY(3) — Open the system journal for readingsd_journal_seek_cursor(3) — Seek to a position in the journalsd_journal_seek_head(3) — Seek to a position in the journalsd_journal_seek_monotonic_usec(3) — Seek to a position in the journalsd_journal_seek_realtime_usec(3) — Seek to a position in the journalsd_journal_seek_tail(3) — Seek to a position in the journalsd_journal_send(3) — Submit log entries to the journalsd_journal_send_with_location(3) — Submit log entries to the journalsd_journal_sendv(3) — Submit log entries to the journalsd_journal_sendv_with_location(3) — Submit log entries to the journalsd_journal_set_data_threshold(3) — Read data fields from the current journal entrysd_journal_stream_fd(3) — Create log stream file descriptor to the journalSD_JOURNAL_SUPPRESS_LOCATION(3) — Submit log entries to the journalSD_JOURNAL_SYSTEM(3) — Open the system journal for readingsd_journal_test_cursor(3) — Get cursor string for or test cursor string against the current journal entrysd_journal_wait(3) — Journal change notification interfacesd_listen_fds(3) — Check for file descriptors passed by the system managerSD_LISTEN_FDS_START(3) — Check for file descriptors passed by the system managersd_listen_fds_with_names(3) — Check for file descriptors passed by the system managersd_login_monitor(3) — Monitor login sessions, seats, users and virtual machines/containerssd_login_monitor_flush(3) — Monitor login sessions, seats, users and virtual machines/containerssd_login_monitor_get_events(3) — Monitor login sessions, seats, users and virtual machines/containerssd_login_monitor_get_fd(3) — Monitor login sessions, seats, users and virtual machines/containerssd_login_monitor_get_timeout(3) — Monitor login sessions, seats, users and virtual machines/containerssd_login_monitor_new(3) — Monitor login sessions, seats, users and virtual machines/containerssd_login_monitor_unref(3) — Monitor login sessions, seats, users and virtual machines/containerssd_login_monitor_unrefp(3) — Monitor login sessions, seats, users and virtual machines/containerssd_machine_get_class(3) — Determine the class and network interface indices of a locally running virtual machine or containersd_machine_get_ifindices(3) — Determine the class and network interface indices of a locally running virtual machine or containerSD_NOTICE(3) — APIs for new-style daemonssd_notify(3) — Notify service manager about start-up completion and other service status changessd_notify_barrier(3) — Notify service manager about start-up completion and other service status changessd_notifyf(3) — Notify service manager about start-up completion and other service status changessd_path_lookup(3) — Query well-known file system pathssd_path_lookup_strv(3) — Query well-known file system pathssd_peer_get_cgroup(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs tosd_peer_get_machine_name(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs tosd_peer_get_owner_uid(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs tosd_peer_get_session(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs tosd_peer_get_slice(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs tosd_peer_get_unit(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs tosd_peer_get_user_slice(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs tosd_peer_get_user_unit(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs tosd_pid_get_cgroup(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs tosd_pid_get_machine_name(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs tosd_pid_get_owner_uid(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs tosd_pid_get_session(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs tosd_pid_get_slice(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs tosd_pid_get_unit(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs tosd_pid_get_user_slice(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs tosd_pid_get_user_unit(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs tosd_pid_notify(3) — Notify service manager about start-up completion and other service status changessd_pid_notify_with_fds(3) — Notify service manager about start-up completion and other service status changessd_pid_notifyf(3) — Notify service manager about start-up completion and other service status changessd_seat_can_graphical(3) — Determine state of a specific seatsd_seat_can_tty(3) — Determine state of a specific seatsd_seat_get_active(3) — Determine state of a specific seatsd_seat_get_sessions(3) — Determine state of a specific seatsd_session_get_class(3) — Determine state of a specific sessionsd_session_get_desktop(3) — Determine state of a specific sessionsd_session_get_display(3) — Determine state of a specific sessionsd_session_get_remote_host(3) — Determine state of a specific sessionsd_session_get_remote_user(3) — Determine state of a specific sessionsd_session_get_seat(3) — Determine state of a specific sessionsd_session_get_service(3) — Determine state of a specific sessionsd_session_get_state(3) — Determine state of a specific sessionsd_session_get_tty(3) — Determine state of a specific sessionsd_session_get_type(3) — Determine state of a specific sessionsd_session_get_uid(3) — Determine state of a specific sessionsd_session_get_vt(3) — Determine state of a specific sessionsd_session_is_active(3) — Determine state of a specific sessionsd_session_is_remote(3) — Determine state of a specific sessionsd_uid_get_display(3) — Determine login state of a specific Unix user IDsd_uid_get_seats(3) — Determine login state of a specific Unix user IDsd_uid_get_sessions(3) — Determine login state of a specific Unix user IDsd_uid_get_state(3) — Determine login state of a specific Unix user IDsd_uid_is_on_seat(3) — Determine login state of a specific Unix user IDSD_WARNING(3) — APIs for new-style daemonssd_watchdog_enabled(3) — Check whether the service manager expects watchdog keep-alive notifications from a serviceshutdown(8) — Halt, power-off or reboot the machinesleep.conf.d(5) — Suspend and hibernation configuration filesysctl.d(5) — Configure kernel parameters at bootsystem.conf.d(5) — System and session service manager configuration filessystemctl(1) — Control the systemd system and service managersystemd(1) — systemd system and service managersystemd-analyze(1) — Analyze and debug system managersystemd-ask-password(1) — Query the user for a system passwordsystemd-ask-password-console.path(8) — Query the user for system passwords on the console and via wallsystemd-ask-password-console.service(8) — Query the user for system passwords on the console and via wallsystemd-ask-password-wall.path(8) — Query the user for system passwords on the console and via wallsystemd-ask-password-wall.service(8) — Query the user for system passwords on the console and via wallsystemd-backlight(8) — Load and save the display backlight brightness at boot and shutdownsystemd-backlight [at] .service(8) — Load and save the display backlight brightness at boot and shutdownsystemd-binfmt(8) — Configure additional binary formats for executables at bootsystemd-binfmt.service(8) — Configure additional binary formats for executables at bootsystemd-bless-boot(8) — Mark current boot process as successfulsystemd-bless-boot-generator(8) — Pull systemd-bless-boot.service into the initial boot transaction when boot counting is in effectsystemd-bless-boot.service(8) — Mark current boot process as successfulsystemd-boot(7) — A simple UEFI boot managersystemd-boot-check-no-failures(8) — verify that the system booted up cleanlysystemd-boot-check-no-failures.service(8) — verify that the system booted up cleanlysystemd-boot-system-token.service(8) — Generate an initial boot loader system token and random seedsystemd-cat(1) — Connect a pipeline or program’s output with the journalsystemd-cgls(1) — Recursively show control group contentssystemd-cgtop(1) — Show top control groups by their resource usagesystemd-coredump(8) — Acquire, save and process core dumpssystemd-coredump.socket(8) — Acquire, save and process core dumpssystemd-coredump [at] .service(8) — Acquire, save and process core dumpssystemd-cryptenroll(1) — Enroll PKCS#11, FIDO2, TPM2 token/devices to LUKS2 encrypted volumessystemd-cryptsetup(8) — Full disk decryption logicsystemd-cryptsetup-generator(8) — Unit generator for /etc/crypttabsystemd-cryptsetup [at] .service(8) — Full disk decryption logicsystemd-debug-generator(8) — Generator for enabling a runtime debug shell and masking specific units at bootsystemd-delta(1) — Find overridden configuration filessystemd-detect-virt(1) — Detect execution in a virtualized environmentsystemd-dissect(1) — Dissect file system OS imagessystemd-environment-d-generator(8) — Load variables specified by environment.dsystemd-escape(1) — Escape strings for usage in systemd unit namessystemd-fsck(8) — File system checker logicsystemd-fsck-root.service(8) — File system checker logicsystemd-fsck [at] .service(8) — File system checker logicsystemd-fsckd(8) — File system check progress reportingsystemd-fsckd.service(8) — File system check progress reportingsystemd-fsckd.socket(8) — File system check progress reportingsystemd-fstab-generator(8) — Unit generator for /etc/fstabsystemd-getty-generator(8) — Generator for enabling getty instances on the consolesystemd-gpt-auto-generator(8) — Generator for automatically discovering and mounting root, /home/ , /srv/ , /var/ and /var/tmp/ partitions, as well as discovering and enabling swap partitions, based on GPT partition type GUIDssystemd-growfs(8) — Creating and growing file systems on demandsystemd-growfs [at] .service(8) — Creating and growing file systems on demandsystemd-halt.service(8) — System shutdown logicsystemd-hibernate-resume(8) — Resume from hibernationsystemd-hibernate-resume-generator(8) — Unit generator for resume= kernel parametersystemd-hibernate-resume [at] .service(8) — Resume from hibernationsystemd-hibernate.service(8) — System sleep state logicsystemd-hostnamed(8) — Daemon to control system hostname from programssystemd-hostnamed.service(8) — Daemon to control system hostname from programssystemd-hwdb(8) — hardware database management toolsystemd-hybrid-sleep.service(8) — System sleep state logicsystemd-id128(1) — Generate and print sd-128 identifierssystemd-importd(8) — VM and container image import and export servicesystemd-importd.service(8) — VM and container image import and export servicesystemd-inhibit(1) — Execute a program with an inhibition lock takensystemd-initctl(8) — /dev/initctl compatibilitysystemd-initctl.service(8) — /dev/initctl compatibilitysystemd-initctl.socket(8) — /dev/initctl compatibilitysystemd-journal-gatewayd(8) — HTTP server for journal eventssystemd-journal-gatewayd.service(8) — HTTP server for journal eventssystemd-journal-gatewayd.socket(8) — HTTP server for journal eventssystemd-journal-remote(8) — Receive journal messages over the networksystemd-journal-remote.service(8) — Receive journal messages over the networksystemd-journal-remote.socket(8) — Receive journal messages over the networksystemd-journal-upload(8) — Send journal messages over the networksystemd-journal-upload.service(8) — Send journal messages over the networksystemd-journald(8) — Journal servicesystemd-journald-audit.socket(8) — Journal servicesystemd-journald-dev-log.socket(8) — Journal servicesystemd-journald-varlink [at] .socket(8) — Journal servicesystemd-journald.service(8) — Journal servicesystemd-journald.socket(8) — Journal servicesystemd-journald [at] .service(8) — Journal servicesystemd-journald [at] .socket(8) — Journal servicesystemd-kexec.service(8) — System shutdown logicsystemd-localed(8) — Locale bus mechanismsystemd-localed.service(8) — Locale bus mechanismsystemd-logind(8) — Login managersystemd-logind.service(8) — Login managersystemd-machine-id-commit.service(8) — Commit a transient machine ID to disksystemd-machine-id-setup(1) — Initialize the machine ID in /etc/machine-idsystemd-machined(8) — Virtual machine and container registration managersystemd-machined.service(8) — Virtual machine and container registration managersystemd-makefs(8) — Creating and growing file systems on demandsystemd-makefs [at] .service(8) — Creating and growing file systems on demandsystemd-mkswap [at] .service(8) — Creating and growing file systems on demandsystemd-modules-load(8) — Load kernel modules at bootsystemd-modules-load.service(8) — Load kernel modules at bootsystemd-mount(1) — Establish and destroy transient mount or auto-mount pointssystemd-network-generator(8) — Generate network configuration from the kernel command linesystemd-network-generator.service(8) — Generate network configuration from the kernel command linesystemd-networkd(8) — Network managersystemd-networkd-wait-online(8) — Wait for network to come onlinesystemd-networkd-wait-online.service(8) — Wait for network to come onlinesystemd-networkd.service(8) — Network managersystemd-notify(1) — Notify service manager about start-up completion and other daemon status changessystemd-nspawn(1) — Spawn a command or OS in a light-weight containersystemd-oomd(8) — A userspace out-of-memory (OOM) killersystemd-oomd.service(8) — A userspace out-of-memory (OOM) killersystemd-path(1) — List and query system and user pathssystemd-portabled(8) — Portable service managersystemd-portabled.service(8) — Portable service managersystemd-poweroff.service(8) — System shutdown logicsystemd-pstore(8) — A service to archive contents of pstoresystemd-pstore.service(8) — A service to archive contents of pstoresystemd-quotacheck(8) — File system quota checker logicsystemd-quotacheck.service(8) — File system quota checker logicsystemd-random-seed(8) — Load and save the system random seed at boot and shutdownsystemd-random-seed.service(8) — Load and save the system random seed at boot and shutdownsystemd-rc-local-generator(8) — Compatibility generator and service to start /etc/rc.local during bootsystemd-reboot.service(8) — System shutdown logicsystemd-remount-fs(8) — Remount root and kernel file systemssystemd-remount-fs.service(8) — Remount root and kernel file systemssystemd-repart(8) — Automatically grow and add partitionssystemd-repart.service(8) — Automatically grow and add partitionssystemd-resolved(8) — Network Name Resolution managersystemd-resolved.service(8) — Network Name Resolution managersystemd-rfkill(8) — Load and save the RF kill switch state at boot and changesystemd-rfkill.service(8) — Load and save the RF kill switch state at boot and changesystemd-rfkill.socket(8) — Load and save the RF kill switch state at boot and changesystemd-run(1) — Run programs in transient scope units, service units, or path-, socket-, or timer-triggered service unitssystemd-run-generator(8) — Generator for invoking commands specified on the kernel command line as system servicesystemd-shutdown(8) — System shutdown logicsystemd-sleep(8) — System sleep state logicsystemd-sleep.conf(5) — Suspend and hibernation configuration filesystemd-socket-activate(1) — Test socket activation of daemonssystemd-socket-proxyd(8) — Bidirectionally proxy local sockets to another (possibly remote) socketsystemd-suspend-then-hibernate.service(8) — System sleep state logicsystemd-suspend.service(8) — System sleep state logicsystemd-sysctl(8) — Configure kernel parameters at bootsystemd-sysctl.service(8) — Configure kernel parameters at bootsystemd-sysext(8) — Activates System Extension Imagessystemd-sysext.service(8) — Activates System Extension Imagessystemd-system-update-generator(8) — Generator for redirecting boot to offline update modesystemd-system.conf(5) — System and session service manager configuration filessystemd-sysusers(8) — Allocate system users and groupssystemd-sysusers.service(8) — Allocate system users and groupssystemd-sysv-generator(8) — Unit generator for SysV init scriptssystemd-time-wait-sync(8) — Wait until kernel time is synchronizedsystemd-time-wait-sync.service(8) — Wait until kernel time is synchronizedsystemd-timedated(8) — Time and date bus mechanismsystemd-timedated.service(8) — Time and date bus mechanismsystemd-timesyncd(8) — Network Time Synchronizationsystemd-timesyncd.service(8) — Network Time Synchronizationsystemd-tmpfiles(8) — Creates, deletes and cleans up volatile and temporary files and directoriessystemd-tmpfiles-clean.service(8) — Creates, deletes and cleans up volatile and temporary files and directoriessystemd-tmpfiles-clean.timer(8) — Creates, deletes and cleans up volatile and temporary files and directoriessystemd-tmpfiles-setup-dev.service(8) — Creates, deletes and cleans up volatile and temporary files and directoriessystemd-tmpfiles-setup.service(8) — Creates, deletes and cleans up volatile and temporary files and directoriessystemd-tty-ask-password-agent(1) — List or process pending systemd password requestssystemd-udev-settle.service(8) — Wait for all pending udev events to be handledsystemd-udevd(8) — Device event managing daemonsystemd-udevd-control.socket(8) — Device event managing daemonsystemd-udevd-kernel.socket(8) — Device event managing daemonsystemd-udevd.service(8) — Device event managing daemonsystemd-umount(1) — Establish and destroy transient mount or auto-mount pointssystemd-update-done(8) — Mark /etc/ and /var/ fully updatedsystemd-update-done.service(8) — Mark /etc/ and /var/ fully updatedsystemd-update-utmp(8) — Write audit and utmp updates at bootup, runlevel changes and shutdownsystemd-update-utmp-runlevel.service(8) — Write audit and utmp updates at bootup, runlevel changes and shutdownsystemd-update-utmp.service(8) — Write audit and utmp updates at bootup, runlevel changes and shutdownsystemd-user-runtime-dir(5) — System units to start the user managersystemd-user-sessions(8) — Permit user logins after boot, prohibit user logins at shutdownsystemd-user-sessions.service(8) — Permit user logins after boot, prohibit user logins at shutdownsystemd-user.conf(5) — System and session service manager configuration filessystemd-veritysetup(8) — Disk verity protection logicsystemd-veritysetup-generator(8) — Unit generator for verity protected block devicessystemd-veritysetup [at] .service(8) — Disk verity protection logicsystemd-volatile-root(8) — Make the root file system volatilesystemd-volatile-root.service(8) — Make the root file system volatilesystemd-xdg-autostart-generator(8) — User unit generator for XDG autostart filessystemd.automount(5) — Automount unit configurationsystemd.device(5) — Device unit configurationsystemd.directives(7) — Index of configuration directivessystemd.dnssd(5) — DNS-SD configurationsystemd.environment-generator(7) — systemd environment file generatorssystemd.exec(5) — Execution environment configurationsystemd.generator(7) — systemd unit generatorssystemd.journal-fields(7) — Special journal fieldssystemd.kill(5) — Process killing procedure configurationsystemd.link(5) — Network device configurationsystemd.mount(5) — Mount unit configurationsystemd.negative(5) — DNSSEC trust anchor configuration filessystemd.net-naming-scheme(7) — Network device naming schemessystemd.netdev(5) — Virtual Network Device configurationsystemd.network(5) — Network configurationsystemd.nspawn(5) — Container settingssystemd.offline-updates(7) — Implementation of offline updates in systemdsystemd.path(5) — Path unit configurationsystemd.positive(5) — DNSSEC trust anchor configuration filessystemd.preset(5) — Service enablement presetssystemd.resource-control(5) — Resource control unit settingssystemd.scope(5) — Scope unit configurationsystemd.service(5) — Service unit configurationsystemd.slice(5) — Slice unit configurationsystemd.socket(5) — Socket unit configurationsystemd.special(7) — Special systemd unitssystemd.swap(5) — Swap unit configurationsystemd.syntax(7) — General syntax of systemd configuration filessystemd.target(5) — Target unit configurationsystemd.time(7) — Time and date specificationssystemd.timer(5) — Timer unit configurationsystemd.unit(5) — Unit configurationsysusers.d(5) — Declarative allocation of system users and groups
T
telinit(8) — Change SysV runleveltimedatectl(1) — Control the system time and datetimesyncd.conf(5) — Network Time Synchronization configuration filestimesyncd.conf.d(5) — Network Time Synchronization configuration filestmpfiles.d(5) — Configuration for creation, deletion and cleaning of volatile and temporary files
U
udev(7) — Dynamic device managementudev.conf(5) — Configuration for device event managing daemonudev_device_get_action(3) — Query device propertiesudev_device_get_current_tags_list_entry(3) — Retrieve or set device attributesudev_device_get_devlinks_list_entry(3) — Retrieve or set device attributesudev_device_get_devnode(3) — Query device propertiesudev_device_get_devnum(3) — Query device propertiesudev_device_get_devpath(3) — Query device propertiesudev_device_get_devtype(3) — Query device propertiesudev_device_get_driver(3) — Query device propertiesudev_device_get_is_initialized(3) — Query device propertiesudev_device_get_parent(3) — Query device propertiesudev_device_get_parent_with_subsystem_devtype(3) — Query device propertiesudev_device_get_properties_list_entry(3) — Retrieve or set device attributesudev_device_get_property_value(3) — Retrieve or set device attributesudev_device_get_subsystem(3) — Query device propertiesudev_device_get_sysattr_list_entry(3) — Retrieve or set device attributesudev_device_get_sysattr_value(3) — Retrieve or set device attributesudev_device_get_sysname(3) — Query device propertiesudev_device_get_sysnum(3) — Query device propertiesudev_device_get_syspath(3) — Query device propertiesudev_device_get_tags_list_entry(3) — Retrieve or set device attributesudev_device_get_udev(3) — Query device propertiesudev_device_has_current_tag(3) — Retrieve or set device attributesudev_device_has_tag(3) — Retrieve or set device attributesudev_device_new_from_device_id(3) — Create, acquire and release a udev device objectudev_device_new_from_devnum(3) — Create, acquire and release a udev device objectudev_device_new_from_environment(3) — Create, acquire and release a udev device objectudev_device_new_from_subsystem_sysname(3) — Create, acquire and release a udev device objectudev_device_new_from_syspath(3) — Create, acquire and release a udev device objectudev_device_ref(3) — Create, acquire and release a udev device objectudev_device_set_sysattr_value(3) — Retrieve or set device attributesudev_device_unref(3) — Create, acquire and release a udev device objectudev_enumerate_add_match_is_initialized(3) — Modify filtersudev_enumerate_add_match_parent(3) — Modify filtersudev_enumerate_add_match_property(3) — Modify filtersudev_enumerate_add_match_subsystem(3) — Modify filtersudev_enumerate_add_match_sysattr(3) — Modify filtersudev_enumerate_add_match_sysname(3) — Modify filtersudev_enumerate_add_match_tag(3) — Modify filtersudev_enumerate_add_nomatch_subsystem(3) — Modify filtersudev_enumerate_add_nomatch_sysattr(3) — Modify filtersudev_enumerate_add_syspath(3) — Query or modify a udev enumerate objectudev_enumerate_get_list_entry(3) — Query or modify a udev enumerate objectudev_enumerate_get_udev(3) — Query or modify a udev enumerate objectudev_enumerate_new(3) — Create, acquire and release a udev enumerate objectudev_enumerate_ref(3) — Create, acquire and release a udev enumerate objectudev_enumerate_scan_devices(3) — Query or modify a udev enumerate objectudev_enumerate_scan_subsystems(3) — Query or modify a udev enumerate objectudev_enumerate_unref(3) — Create, acquire and release a udev enumerate objectudev_list_entry(3) — Iterate and access udev listsudev_list_entry_get_by_name(3) — Iterate and access udev listsudev_list_entry_get_name(3) — Iterate and access udev listsudev_list_entry_get_next(3) — Iterate and access udev listsudev_list_entry_get_value(3) — Iterate and access udev listsudev_monitor_enable_receiving(3) — Query and modify device monitorudev_monitor_filter_add_match_subsystem_devtype(3) — Modify filtersudev_monitor_filter_add_match_tag(3) — Modify filtersudev_monitor_filter_remove(3) — Modify filtersudev_monitor_filter_update(3) — Modify filtersudev_monitor_get_fd(3) — Query and modify device monitorudev_monitor_get_udev(3) — Query and modify device monitorudev_monitor_new_from_netlink(3) — Create, acquire and release a udev monitor objectudev_monitor_receive_device(3) — Query and modify device monitorudev_monitor_ref(3) — Create, acquire and release a udev monitor objectudev_monitor_set_receive_buffer_size(3) — Query and modify device monitorudev_monitor_unref(3) — Create, acquire and release a udev monitor objectudev_new(3) — Create, acquire and release a udev context objectudev_ref(3) — Create, acquire and release a udev context objectudev_unref(3) — Create, acquire and release a udev context objectudevadm(8) — udev management tooluser-runtime-dir [at] .service(5) — System units to start the user manageruser.conf.d(5) — System and session service manager configuration filesuser [at] .service(5) — System units to start the user manager
V
veritytab(5) — Configuration for verity block devices
See Also
systemd.directives(7) This index contains 1024 entries, referring to 354 individual manual pages.