prelude_correlator_selinux (8) - Linux Manuals
prelude_correlator_selinux: Security Enhanced Linux Policy for the prelude_correlator processes
NAMEprelude_correlator_selinux - Security Enhanced Linux Policy for the prelude_correlator processes
Security-Enhanced Linux secures the prelude_correlator processes via flexible mandatory access control.
The prelude_correlator processes execute with the prelude_correlator_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier.
ps -eZ | grep prelude_correlator_t
The prelude_correlator_t SELinux type can be entered via the prelude_correlator_exec_t file type.
The default entrypoint paths for the prelude_correlator_t domain are the following:
PROCESS TYPESSELinux defines process types (domains) for each process running on the system
You can see the context of a process using the -Z option to psP Policy governs the access confined processes have to files. SELinux prelude_correlator policy is very flexible allowing users to setup their prelude_correlator processes in as secure a method as possible.
The following process types are defined for prelude_correlator:
Note: semanage permissive -a prelude_correlator_t can be used to make the process type prelude_correlator_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.
BOOLEANSSELinux policy is customizable based on least access required. prelude_correlator policy is extremely flexible and has several booleans that allow you to manipulate the policy and run prelude_correlator with the tightest access possible.
If you want to allow all daemons to write corefiles to /, you must turn on the daemons_dump_core boolean. Disabled by default.
setsebool -P daemons_dump_core 1
If you want to enable cluster mode for daemons, you must turn on the daemons_enable_cluster_mode boolean. Enabled by default.
setsebool -P daemons_enable_cluster_mode 1
If you want to allow all daemons to use tcp wrappers, you must turn on the daemons_use_tcp_wrapper boolean. Disabled by default.
setsebool -P daemons_use_tcp_wrapper 1
If you want to allow all daemons the ability to read/write terminals, you must turn on the daemons_use_tty boolean. Disabled by default.
setsebool -P daemons_use_tty 1
If you want to deny any process from ptracing or debugging any other processes, you must turn on the deny_ptrace boolean. Enabled by default.
setsebool -P deny_ptrace 1
If you want to allow all domains to use other domains file descriptors, you must turn on the domain_fd_use boolean. Enabled by default.
setsebool -P domain_fd_use 1
If you want to allow all domains to have the kernel load modules, you must turn on the domain_kernel_load_modules boolean. Disabled by default.
setsebool -P domain_kernel_load_modules 1
If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.
setsebool -P fips_mode 1
If you want to enable reading of urandom for all domains, you must turn on the global_ssp boolean. Disabled by default.
setsebool -P global_ssp 1
If you want to allow confined applications to use nscd shared memory, you must turn on the nscd_use_shm boolean. Disabled by default.
setsebool -P nscd_use_shm 1
The SELinux process type prelude_correlator_t can manage files labeled with the following file types. The paths listed are the default paths for these file types. Note the processes UID still need to have DAC permissions.
FILE CONTEXTSSELinux requires files to have an extended attribute to define the file type.
You can see the context of a file using the -Z option to lsP Policy governs the access confined processes have to these files. SELinux prelude_correlator policy is very flexible allowing users to setup their prelude_correlator processes in as secure a method as possible.
STANDARD FILE CONTEXT
SELinux defines the file context types for the prelude_correlator, if you wanted to store files with these types in a diffent paths, you need to execute the semanage command to sepecify alternate labeling and then use restorecon to put the labels on disk.
semanage fcontext -a -t prelude_correlator_config_t '/srv/myprelude_correlator_content(/.*)?'
restorecon -R -v /srv/myprelude_correlator_content
Note: SELinux often uses regular expressions to specify labels that match multiple files.
The following file types are defined for prelude_correlator:
- Set files with the prelude_correlator_config_t type, if you want to treat the files as prelude correlator configuration data, usually stored under the /etc directory.
- Set files with the prelude_correlator_exec_t type, if you want to transition an executable to the prelude_correlator_t domain.
Note: File context can be temporarily modified with the chcon command. If you want to permanently change the file context you need to use the semanage fcontext command. This will modify the SELinux labeling database. You will need to use restorecon to apply the labels.
COMMANDSsemanage fcontext can also be used to manipulate default file context mappings.
semanage permissive can also be used to manipulate whether or not a process type is permissive.
semanage module can also be used to enable/disable/install/remove policy modules.
semanage boolean can also be used to manipulate the booleans
system-config-selinux is a GUI tool available to customize SELinux policy settings.
AUTHORThis manual page was auto-generated using sepolicy manpage.
SEE ALSOselinux(8), prelude_correlator(8), semanage(8), restorecon(8), chcon(1), sepolicy(8) , setsebool(8)