SysTutorials

How to Attach and Mount a Xen DomU Disk in Dom0

· updated April 13, 2026

There are times when you need direct access to a DomU’s disk from Dom0—for recovery, backup, or maintenance. This is straightforward with Xen’s block device tools, though the commands have evolved depending on your Xen version.

Attaching the Disk

The method depends on which Xen toolstack you’re using.

With xl (Xen 4.1+, recommended):

xl block-attach Domain-0 phy:/dev/vg_xen/vm-10.1.1.228 xvda w

With xm (older Xen, deprecated):

xm block-attach Domain-0 phy:vg_xen/vm-10.1.1.228 xvda w

The format is:

Discovering Attached Partitions

After attaching, the block device should appear as /dev/xvda. To see available partitions:

lsblk /dev/xvda
# or
fdisk -l /dev/xvda
# or
parted /dev/xvda print

For example, if the DomU had /dev/xvda1 as /boot and /dev/xvda2 as /, you’ll see:

xvda
├─xvda1  512M
└─xvda2  19.5G

Mounting the Partition

Create a mount point and mount the partition:

mkdir -p /mnt/xvda2
mount /dev/xvda2 /mnt/xvda2

If the filesystem is damaged or needs checking first:

fsck -n /dev/xvda2  # Read-only check
fsck /dev/xvda2     # Fix errors
mount /dev/xvda2 /mnt/xvda2

For read-only access (safer when you’re just examining):

mount -o ro /dev/xvda2 /mnt/xvda2

Unmounting and Detaching

When done, unmount cleanly:

umount /mnt/xvda2

If the device is busy, find what’s using it:

lsof /mnt/xvda2
fuser -m /mnt/xvda2

Then detach the block device. With xl:

xl block-detach Domain-0 xvda

Or with xm:

xm block-detach Domain-0 xvda

You can also use the device ID shown in xl block-list Domain-0:

xl block-list Domain-0
# Output: Name ID State ...
xl block-detach Domain-0 0  # ID instead of device name

Working with Multiple Partitions

If you need multiple partitions mounted simultaneously, attach them with different device names:

xl block-attach Domain-0 phy:/dev/vg_xen/vm-10.1.1.228 xvda w
xl block-attach Domain-0 phy:/dev/vg_xen/vm-10.1.1.229 xvdb w
mount /dev/xvda1 /mnt/vm1
mount /dev/xvdb1 /mnt/vm2

Then detach each one separately when done.

Common Issues

Device already in use: If a DomU is currently running and using the disk, attaching will fail or cause corruption. Always shut down the DomU first:

xl shutdown vm-name
xl destroy vm-name  # If shutdown hangs

Stale block device: After detaching, if /dev/xvda still exists, scan for changes:

echo 1 > /sys/block/xvda/device/delete

LVM not found: Ensure the LVM volume group is available in Dom0:

vgs
lvs

If the VG isn’t visible, activate it:

vgchange -ay vg_xen

2026 Best Practices

This article extends “How to Attach and Mount a Xen DomU Disk in Dom0” with practical guidance. Modern development practices emphasize security, performance, and maintainability. Follow these guidelines to build robust, production-ready systems.

Additional Resources

This guide covers the essential concepts and practical implementations for How to Attach and Mount a Xen DomU Disk in Dom0. For further reading and advanced topics, explore the following areas:

Summary

In this comprehensive guide, we covered the fundamentals of How to Attach and Mount a Xen DomU Disk in Dom0 and explored practical implementations. By understanding these concepts and applying the techniques discussed, you can effectively work with How to Attach and Mount a Xen DomU Disk in Dom0 in your projects. Remember to practice regularly and continue learning to stay updated with the latest developments and best practices in this field.

← All posts