cgexec – run the task in given control groups Synopsiscgexec [-h] [-g <controllers>:<path>] [–sticky] command [arguments] DescriptionThe cgexec program executes the task command with arguments arguments in the given control groups. -g <controllers>:<path> defines the control groups in which the task will be run. controllers is a list of controllers and path is the relative…
cgdelete – remove control group(s) Synopsiscgdelete [-h] [-r] [[-g] <controllers>:<path>] … DescriptionThe cgdelete program removes all specified control groups. [-g] <controllers>:<path> Defines the control group to delete. Multiple control groups may be specified. -g is optional. -h, –help Display this help and exit. -r, –recursive Recursively remove all subgroups. Environment VariablesCGROUP_LOGLEVEL controls verbosity of the…
CGDB – manual page for CGDB 0.6.8 DescriptionCGDB Usage:cgdb [cgdb options] [–] [gdb options]CGDB Options:–version Print version information and then exit. –help Print help (this message) and then exit. -d Set debugger to use. — Marks the end of CGDB’s options.CopyrightCopyright 2002-2010 Bob Rossi and Mike Mueller. CGDB is free software, covered by the GNU…
cgcreate – create new cgroup(s) Synopsiscgcreate [-h] [-t <tuid>:<tgid>] [-a <agid>:<auid>] [-f mode] [-d mode] [-s mode] -g <controllers>:<path> [-g …] DescriptionThe command creates new cgroup(s) defined by the options -g. -a <agid>:<auid> defines the name of the user and the group which own the rest of the defined control group’s files. These users are…
cgclear – unload the cgroup filesystem Synopsiscgclear [-e] [-l <filename>] [-L <directory>] […] DescriptionWithout parameters, this command moves all the tasks inside the various cgroups to the root cgroup, deletes all the cgroups and finally unmounts the cgroup filesystem from the system. If one or more config files are specified, only groups defined in the…
cgclassify – move running task(s) to given cgroups Synopsiscgclassify [-g <controllers>:<path>] [–sticky | –cancel-sticky] <pidlist> Descriptionthis command moves processes defined by the list of processes (pidlist) to the given control groups. The pids in the pidlist are separated by spaces -g <controllers>:<path> defines the control groups where the task will be moved. controllers is a…
cgcc – Compiler wrapper to run Sparse after compiling Synopsiscgcc [SPARSE OPTIONS]… [COMPILER OPTIONS]… [INPUT FILES]… make CC=cgcc Descriptioncgcc provides a wrapper around a C compiler (cc by default) which also invokes the Sparse static analysis tool. cgcc accepts all Sparse command-line options, such as warning options, and passes all other options through to the…
cg_merge – merges multiple Cachegrind output files into one Synopsis cg_merge [options] [cachegrind-out-files…]Descriptioncg_merge sums together the outputs of multiple Cachegrind runs into a single output file. Options-o outfile Write the profile data to outfile rather than to standard output.See Alsocg_annotate(1), valgrind(1), $INSTALL/share/doc/valgrind/html/index.html or http://www.valgrind.org/docs/manual/index.html. AuthorNicholas Nethercote.
cg_diff – compares two Cachegrind output files Synopsis cg_diff [options] cachegrind-out-file1 cachegrind-out-file2Descriptioncg_diff takes two output files produced by the Valgrind tool Cachegrind, computes the difference and prints the result in the same format that Cachegrinds outputs. Options-h –help Show the help message. –version Show the version number. –mod-filename=<expr> [default: none] Specifies a Perl search-and-replace expression…
cg_annotate – post-processing tool for Cachegrind Synopsis cg_annotate [options] cachegrind-out-file [source-files…]Descriptioncg_annotate takes an output file produced by the Valgrind tool Cachegrind and prints the information in an easy-to-read form. Options-h –help Show the help message. –version Show the version number. –show=A,B,C [default: all, using order in cachegrind.out.<pid>] Specifies which events to show (and the column…
cfv – Verify file consistency with .sfv, .csv, .crc, .md5, md5sum, sha1sum, .torrent, par, or par2 files Synopsiscfv [-p dir] [-v|-V|-VV] [-r|-rr|-R] [-n|-N] [–renameformat <s>] [-s|-S] [-zz|-z|-Z|-ZZ] [-T|-C] [-m|-M] [-i|-I] [-u|-uu|-U] [–unquote <b>] [–fixpaths <s>] [–showpaths <i>] [–list/–list0 <l>] [–announceurl <u>] [–piece_size_pow2 <n>] [-t type] [-f file] [files…] Descriptioncfv verifies that the files you have…
cftp – Conch command-line SFTP client Synopsiscftp [-B buffer_size ] [-b command_file ] [-R num_requests ] [-s subsystem ] Descriptioncftp is a client for logging into a remote machine and executing commands to send and receive file information. It can wrap a number of file transfer subsystems The options are as follows: -B Specifies the…
cfgmaker – Creates mrtg.cfg files (for mrtg-2.17.4) Synopsiscfgmaker [options] [community@]router [[options] [community@]router …] Options –ifref=nr interface references by Interface Number (default) –ifref=ip … by Ip Address –ifref=eth … by Ethernet Number –ifref=descr … by Interface Description –ifref=name … by Interface Name –ifref=type … by Interface Type You may also use multiple options separated by commas,…
cfgmaint – configuration tool for Visual Builder Syntaxcfgmaint [ -rbxop ] command object [ parameters ] DescriptionMaintains widget palette configuration for the Visual Builder. It can be stored in the system-wide and the local user config files. "cfgmaint" allows adding, renaming, moving, and deleting the classes and pages in the Visual Builder widget palette. Usage"cfgmaint"…
cfftot1 – convert PostScript font from CFF to Type 1 Synopsiscfftot1 [-a] [input [output]] DescriptionCfftot1 converts PostScript font programs in the Compact Font Format (CFF) into Type 1 font programs in PFB or PFA format, preserving all hints that can be represented in Type 1. The input file should be a raw CFF file or…
Cervisia – Graphical CVS frontend Synopsiscervisia [ –display display ] [ –caption caption ] [ –icon icon ] [ –miniicon miniicon ] [ –config filename ] [ –dcopserver server ] [ –nocrashhandler ] [ –waitforwm ] [ –style style ] [ –geometry geometry ] [ –resolve filename ] [ –log filename ] [ –annotate filename ] [ directory ] DescriptionCervisia is a graphical user interface for the Concurrent Versions System. It is based on the KDE libraries and therefore shares their Look’n’Feel, configuration and help system. OptionsCervisia accepts the following options: directory Tells Cervisia…
certwatch – generate SSL certificate expiry warnings Synopsis certwatch [OPTION…] filenameDescriptionThe certwatch program is used to issue warning mail when an SSL certificate is about to expire. The program has two modes of operation: normal mode and quiet mode. In normal mode, the certificate given by the filename argument is examined, and a warning email…
certutil – Manage keys and certificate in both NSS databases and other NSS tokens Synopsis certutil [options] [[arguments]]StatusThis documentation is still work in progress. Please contribute to the initial review in m[blue]Mozilla NSS bug 836477m[][1] DescriptionThe Certificate Database Tool, certutil, is a command-line utility that can create and modify certificate and key databases. It can…
certmgr – Mono Certificate Manager (CLI version) Synopsiscertmgr [action] [object type] [options] store [filename] or certmgr -ssl [options] url DescriptionThis tool allow to list, add, remove or extract certificates, certificate revocation lists (CRL) or certificate trust lists (CTL) to/from a certificate store. Certificate stores are used to build and validate certificate chains for Authenticode(r) code…
certmaster — hands out certificates to programs that want them, like certmaster-request or users of the certmaster API Synopsiscertmaster (it’s a daemon and takes no arguments) DescriptionSee https://fedorahosted.org/certmaster Certmaster is a daemon that runs on a “master” machine to hand out certificates to machines that want them. Certificates can then be used by applications like…