night_darks – non-iteractive dark snapshoting with CCD camera Synopsis night_darks [options] exptime1 [exptime2] … DescriptionThe options are as follows: -oo output filename mask, default: ” -o output prefix name, default: ‘d’ -n number of exposures, default=0 -obsname,-observer observer’s name -name,-object object’s name, default: -name dark -w wait for specified num. of seconds, integer, default: 1 -b binning, default=3 -r select…
night_dark – subtract dark from image Synopsis night_dark [result image dark] DescriptionThe options are as follows: This routine is internal part of the nightview package and the user isn’t supposed invoke it directly at anytime. Reporting Bugshttp://integral.sci.muni.cz BugsNot found except listed on http://integral.sci.muni.cz. See Alsonightview(1). See the /usr/share/doc/nightview-doc directory for description. Homepage: http://www.physics.muni.cz/mb/nightview/ AuthorThis manual page was…
night_batch – non-interactive snapshoting with CCD camera Synopsis night_control [options] exptime1,filter1 [exptime2,filter2] … DescriptionThe options are as follows: -oo output filename mask, default: ” -o output prefix name, default: ‘image’ -n number of exposures, default=0 -obsname,-observer observer’s name -name,-object object’s name -d auto-dark substract, dark interval, default: 0 no darks -w wait for specified num. of seconds, integer, default: 1…
night_batch – non-interactive snapshoting with CCD camera Synopsis night_control [options] exptime1,filter1 [exptime2,filter2] … DescriptionThe options are as follows: -oo output filename mask, default: ” -o output prefix name, default: ‘image’ -n number of exposures, default=0 -obsname,-observer observer’s name -name,-object object’s name -d auto-dark substract, dark interval, default: 0 no darks -w wait for specified num. of seconds, integer, default: 1…
naim – console mode chat client Synopsisnaim nicq nirc [nickname [server]] nlily Descriptionnaim is the original ncurses AIM client. It uses the TOC protocol, and features many commonly-requested features found nowhere else, while still providing an intuitive chat interface. OptionsIf a `.naimrc‘ file exists in your home directory, naim executes that and ignores all command…
nicotine is a graphical client for the SoulSeek peer-to-peer network. Synopsisnicotine [options] Descriptionnicotine is a GTK-based client for the SoulSeek peer-to-peer network written in Python. Options-c <file>, –config=<file> Use <file> as configuration file. If <file> does not exists a new empty configuration file will be created. -d, –disable-trayicon -t, –enable-trayicon Enable/disable the tray icon. -h,…
nicotine-import-winconfig is a script to convert SoulSeek Windows client configuration file to the Nicotine format. Synopsisnicotine-import-winconfig [options] <path_to_the_windows_soulseek_files> Descriptionnicotine-import-winconfig will read the SoulSeek Windows client configuration file and will extract information like download queue, userlist, login information, list of autojoined chatrooms, list of banned users, user info/picture, and write them to $HOME/.nicotine/config, which is the…
nickle – a desk calculator language Synopsisnickle [–help|–usage] [-f file] [-l library] [-e expr] [ script ] [–] [arg …] DescriptionNickle is a desk calculator language with powerful programming and scripting capabilities. Nickle supports a variety of datatypes, especially arbitrary precision integers, rationals, and imprecise reals. The input language vaguely resembles C. Some things in…
nice – run a program with modified scheduling priority Synopsisnice [,OPTION/] [,COMMAND /[,ARG/]…] DescriptionRun COMMAND with an adjusted niceness, which affects process scheduling. With no COMMAND, print the current niceness. Niceness values range from -20 (most favorable to the process) to 19 (least favorable to the process). Mandatory arguments to long options are mandatory for…
nhlf90 – Command for compiling Fortran code that uses the NCAR Graphics high-level utilities. Synopsisnhlf90 [-ngmath] [-ncarbd] [-ngmathbd] [-netcdf] [-hdf] … Descriptionnhlf90 is a script that invokes the FORTRAN 90 compiler/linker with the proper NCAR Graphics LLU (low-level utility) and HLU (high-level utility) libraries. Arguments presented above are associated with NCAR Graphics. All other arguments…
nhlf77 – Command for compiling Fortran code that uses the NCAR Graphics high-level utilities. Synopsisnhlf77 [-ngmath] [-ncarbd] [-ngmathbd] [-netcdf] [-hdf] … Descriptionnhlf77 is a script that invokes the FORTRAN 77 compiler/linker with the proper NCAR Graphics LLU (low-level utility) and HLU (high-level utility) libraries. Arguments presented above are associated with NCAR Graphics. All other arguments…
nhlcc – Command for compiling C code that uses the NCAR Graphics high-level utilities. Synopsisnhlcc [-ngmath] [-ncarbd] [-ngmathbd] [-netcdf] [-hdf] … Descriptionnhlcc is a script that invokes the C compiler/linker with the proper NCAR Graphics LLU (low-level utility) and HLU (high-level utility) libraries. Arguments presented above are associated with NCAR Graphics. All other arguments and…
ngspice – circuit simulator derived from spice]3f5 Synopsisngspice [options] [file …] DescriptionThis man page is just a small overview. The primary documentation of ngspice is in the ngspice] User’s Manual, which is available as a pdf file. Options-n or –no-spiceinit Don’t try to source the file ".spiceinit" upon startup. Normally ngspice] tries to find the…
sconvert – convert spice formats Synopsissconvert fromtype fromfile totype tofile sconvert fromtype totype sconvert DescriptionSconvert translates spice output files among three formats: the old binary format, a new binary format, and a new ascii format. The formats are specified by the fromtype and totype arguments: `o’ for the old format, `b’ for the new binary…
ngnutmeg – ngspice post-processor Synopsisngnutmeg [options] [datafile …] DescriptionThis man page is just a small overview. The primary documentation of ngspice is in the ngspice] User’s Manual, which is available as a pdf file. ngnutmeg is a post processor for ngspice] – it takes the raw output file created by ngspice -r and plots the…
ngmultidec – make ngpice sub-circuit for coupled transmission lines Synopsisngmultidec [ options… ] Descriptionngmultidec writes an ngspice input file to standard output which describes a sub-circuit for coupled lines using uncoupled simple lossy lines. Each generated subcircuit models a 4-conductor transmission line with the following parameters: length l, line capacitance c, line resistance r, line…
nghttpx – HTTP/2 proxy Synopsisnghttpx [OPTIONS]… [<PRIVATE_KEY> <CERT>] DescriptionA reverse proxy for HTTP/2, HTTP/1 and SPDY. <PRIVATE_KEY> Set path to server’s private key. Required unless -p, –client or –frontend-no-tls are given. <CERT> Set path to server’s certificate. Required unless -p, –client or –frontend-no-tls are given. To make OCSP stapling work, this must be absolute path.OptionsThe…
nghttpd – HTTP/2 server Synopsisnghttpd [OPTION]… <PORT> [<PRIVATE_KEY> <CERT>] DescriptionHTTP/2 server <PORT> Specify listening port number. <PRIVATE_KEY> Set path to server’s private key. Required unless –no-tls is specified. <CERT> Set path to server’s certificate. Required unless –no-tls is specified.Options-a, –address=<ADDR> The address to bind to. If not specified the default IP address determined by getaddrinfo…
nghttp – HTTP/2 client Synopsisnghttp [OPTIONS]… <URI>… DescriptionHTTP/2 client <URI> Specify URI to access.Options-v, –verbose Print debug information such as reception and transmission of frames and name/value pairs. Specifying this option multiple times increases verbosity. -n, –null-out Discard downloaded data. -O, –remote-name Save download data in the current directory. The filename is derived from URI….
ngettext – translate message and choose plural form Synopsisngettext [,OPTION/] [,TEXTDOMAIN/] ,MSGID MSGID-PLURAL COUNT/ DescriptionThe ngettext program translates a natural language message into the user’s language, by looking up the translation in a message catalog, and chooses the appropriate plural form, which depends on the number COUNT and the language of the message catalog where…