snmpget – communicates with a network entity using SNMP GET requests Synopsissnmpget [COMMON OPTIONS] [-Cf] AGENT OID [OID]… Descriptionsnmpget is an SNMP application that uses the SNMP GET request to query for information on a network entity. One or more object identifiers (OIDs) may be given as arguments on the command line. Each variable name…
snmpdf – display disk space usage on a network entity via SNMP Synopsissnmpdf [COMMON OPTIONS] [-Cu] AGENT Descriptionsnmpdf is simply a networked version of the typical df command. It checks the disk space on the remote machine by examining the HOST-RESOURCES-MIB’s hrStorageTable or the UCD-SNMP-MIB’s dskTable. By default, the hrStorageTable is preferred as it typically…
snmpdelta – Monitor delta differences in SNMP Counter values Synopsissnmpdelta [ COMMON OPTIONS ] [-Cf] [ -Ct ] [ -Cs ] [ -CS ] [ -Cm ] [ -CF configfile ] [ -Cl ] [ -Cp period ] [ -CP Peaks ] [ -Ck ] [ -CT ] AGENT OID [ OID … ] Descriptionsnmpdelta…
snmpconf – creates and modifies SNMP configuration files Synopsissnmpconf [OPTIONS] [fileToCreate] Start with: snmpconf -g basic_setup Or even just: snmpconfDescriptionsnmpconf is a simple Perl script that walks you through setting up a configuration file step by step. It should be fairly straight forward to use. Merely run it and answer its questions. In its default…
snmpcmd – options and behaviour common to most of the Net-SNMP command-line tools Synopsissnmpcmd [OPTIONS] AGENT [PARAMETERS] DescriptionThis manual page describes the common options for the SNMP commands: snmpbulkget, snmpbulkwalk, snmpdelta, snmpget, snmpgetnext, snmpnetstat, snmpset, snmpstatus, snmptable, snmptest, snmptrap, snmpdf, snmpusm , snmpwalk . The command line applications use the SNMP protocol to communicate with…
snmpcheck – enumerate information via SNMP protocol Synopsissnmpcheck [-OPTIONS ] -t <IP address> DescriptionLike to snmpwalk, snmpcheck permits to enumerate information via SNMP protocol. It allows enumeration (hardware, software, network) of any devices with SNMP protocol support. It could be useful for penetration testing or systems monitoring. Snmpcheck supports the following enumerations (in alfabetic order):…
snmpbulkwalk – retrieve a subtree of management values using SNMP GETBULK requests Synopsissnmpbulkwalk [APPLICATION OPTIONS] [COMMON OPTIONS] AGENT [OID] Descriptionsnmpbulkwalk is an SNMP application that uses SNMP GETBULK requests to query a network entity efficiently for a tree of information. An object identifier (OID) may be given on the command line. This OID specifies which…
snmpbulkget – communicates with a network entity using SNMP GETBULK requests. Synopsissnmpbulkget [COMMON OPTIONS] [-Cn <num>] [-Cr <NUM>] AGENT OID [OID]… Descriptionsnmpbulkget is an SNMP application that uses the SNMP GETBULK request to query a network entity efficiently for information. One or more object identifiers (OIDs) may be given as arguments on the command line….
snmp-bridge-mib – provide Linux bridge information via SNMP Synopsis snmp-bridge-mib {bridge}ArgumentsThe following arguments are required: bridge The name of the Linux bridge for which you want to provide information via SNMP, e.g. br0.DescriptionThe snmp-bridge-mib is an extension to net-snmp. It collects information about a bridge in a Linux system and exports them for query from…
skill, snice – send a signal or report process status Synopsisskill [signal] [options] expression snice [new priority] [options] expression DescriptionThese tools are obsolete and unportable. The command syntax is poorly defined. Consider using the killall, pkill, and pgrep commands instead. The default signal for skill is TERM. Use -l or -L to list available signals….
sndfile-play – play a sound file Synopsissndfile-play file Descriptionsndfile-play plays the specified sound file using : ALSA on Linux /dev/dsp on systems supporting OSS (including Linux) /dev/audio on Sun Solaris CoreAudio on Apple MacOSX waveOut on Microsoft Win32sndfile-play uses libsndfile (http://www.mega-nerd.com/libsndfile/) to read the file. AuthorThis manual page was originally written by Joshua Haberman <joshua…
sndfile-metadata-get – retrieve metadata from a sound file sndfile-metadata-set – set metadata in a sound file Synopsissndfile-metadata-get [options] file sndfile-metadata-set [options] file sndfile-metadata-set [options] input-file output-file Descriptionsndfile-metadata-get and sndfile-metadata-set use libsndfile (http://www.mega-nerd.com/libsndfile/) to retrieve metadata from or set metadata in a sound file. Run "sndfile-metadata-get –help" or "sndfile-metadata-set –help" for more information AuthorThis manual page…
sndfile-metadata-get – retrieve metadata from a sound file sndfile-metadata-set – set metadata in a sound file Synopsissndfile-metadata-get [options] file sndfile-metadata-set [options] file sndfile-metadata-set [options] input-file output-file Descriptionsndfile-metadata-get and sndfile-metadata-set use libsndfile (http://www.mega-nerd.com/libsndfile/) to retrieve metadata from or set metadata in a sound file. Run "sndfile-metadata-get –help" or "sndfile-metadata-set –help" for more information AuthorThis manual page…
sndfile-interleave – convert multiple single channel files into a multi-channel file sndfile-deinterleave – split a multi-channel into multiple single channel files Synopsissndfile-interleave <input 1> <input 2> … -o <output file> sndfile-deinterleave filename Descriptionsndfile-interleave and sndfile-deinterleave use libsndfile (http://www.mega-nerd.com/libsndfile/) to convert back and forth between multiple single channel files and a single multi-channel sound file. Run…
sndfile-info – display information about a sound file Synopsissndfile-info file Descriptionsndfile-info will display basic information about a sound file such as its format, its sample rate, and the number of channels. This information is obtained using libsndfile (http://www.mega-nerd.com/libsndfile/). AuthorThis manual page was originally written by Joshua Haberman <joshua [at] debian.org>, for the Debian GNU/Linux system…
sndfile-interleave – convert multiple single channel files into a multi-channel file sndfile-deinterleave – split a multi-channel into multiple single channel files Synopsissndfile-interleave <input 1> <input 2> … -o <output file> sndfile-deinterleave filename Descriptionsndfile-interleave and sndfile-deinterleave use libsndfile (http://www.mega-nerd.com/libsndfile/) to convert back and forth between multiple single channel files and a single multi-channel sound file. Run…
sndfile-convert – convert a sound files from one format to another Synopsissndfile-convert [encoding] input_file output_file sndfile-convert –help Descriptionsndfile-convert converts sound files from one format to another using libsndfile (http://www.mega-nerd.com/libsndfile/) to read and write the data. The format of the output file is determined by the filename extension of the output file. The optional encoding parameter…
sndfile-concat – concatenates two or more audio files Synopsissndfile-concat infile1 infile2 …. outfile Descriptionsndfile-concat generates a new output file by concatenating two or more input files. The format of the output file is the same as the format of the input file. sndfile-concat does its work using libsndfile (http://www.mega-nerd.com/libsndfile/). AuthorThis manual page was written by…
sndfile-cmp – compares two audio files Synopsissndfile-cmp file1 file2 Descriptionsndfile-cmp compares the audio data of two sound files. In particular most differences in the audio file header, particularly metadata like string info, are completely ignored. sndfile-cmp does its work using libsndfile (http://www.mega-nerd.com/libsndfile/). AuthorThis manual page was written by Erik de Castro Lopo <erikd [at] mega-nerd.com>.
snapraid – SnapRAID Backup For Disk Arrays Synopsissnapraid [-c, –conf CONFIG] [-f, –filter PATTERN] [-d, –filter-disk NAME] [-m, –filter-missing] [-e, –filter-error] [-a, –audit-only] [-h, –pre-hash] [-i, –import DIR] [-p, –plan PERC|bad|new|full] [-o, –older-than DAYS] [-l, –log FILE] [-Z, –force-zero] [-E, –force-empty] [-U, –force-uuid] [-D, –force-device] [-N, –force-nocopy] [-F, –force-full] [-S, –start BLKSTART] [-B, –count BLKCOUNT]…