split2po – Creates a po file from two DocBook XML files Synopsis split2po {Original-XMLTranslated-XML}Descriptionsplit2po is a command-line tool that takes the two given DocBook XML files and produces a gettext message file (PO-file) that represents the changes between them. The resulting PO-file is sent to standard output. translated-XML must be the result of translating original-XML…
split – split a file into pieces Synopsissplit [,OPTION/]… [,FILE /[,PREFIX/]] DescriptionOutput pieces of FILE to PREFIXaa, PREFIXab, …; default size is 1000 lines, and default PREFIX is ‘x’. With no FILE, or when FILE is -, read standard input. Mandatory arguments to long options are mandatory for short options too. -a, –suffix-length=,N/ generate suffixes…
splint – A tool for statically checking C programs Synopsissplint [options] DescriptionSplint is a tool for statically checking C programs for security vulnerabilities and common programming mistakes. With minimal effort, Splint can be used as a better lint(1).If additional effort is invested adding annotations to programs, Splint can perform stronger checks than can be done…
spline – interpolate datasets using splines under tension Synopsisspline [ options ] [ files ] Descriptionspline reads datasets from standard input or from one or more files, and fits a smooth curve (a "spline") through each dataset. An interpolated version of each dataset, consisting of points from the smooth curve, is written to standard output….
diagnostics, splain – produce verbose warning diagnostics SynopsisUsing the "diagnostics" pragma: use diagnostics; use diagnostics -verbose; enable diagnostics; disable diagnostics;Using the "splain" standalone filter program: perl program 2>diag.out splain [-v] [-p] diag.outUsing diagnostics to get stack traces from a misbehaving script: perl -Mdiagnostics=-traceonly my_script.plDescriptionThe diagnostics PragmaThis module extends the terse diagnostics normally emitted by both…
spix – Compile a .tex file, executing commands that are set inside the file itself. Synopsisspix [–version] [-h] [-n] file Descriptionspix parses a .tex file to find lines starting with %$ (before the preambule). Those lines are shell commands that are executed by spix. Commands are executed as-is, excepted that: – command are run from…
spice-vdagentd – Spice guest agent daemon Synopsisspice-vdagent [OPTIONS] DescriptionThe spice guest agent for Linux consists of 2 parts, a system wide daemon spice-vdagentd and a X11 session agent spice-vdagent of which there is one per X11 session. spice-vdagentd gets started through a Sys-V initscript or a systemd unit. FeaturesThe spice guest agent adds the following…
spice-vdagent – Spice guest agent X11 session agent Synopsisspice-vdagent [OPTIONS] DescriptionThe spice guest agent for Linux consists of 2 parts, a system wide daemon spice-vdagentd and a X11 session agent spice-vdagent of which there is one per X11 session. spice-vdagent gets automatically started in desktop environments which honor /etc/xdg/autostart, and under gdm. FeaturesThe spice guest…
Spice-GTK – a client-side library to access remote SPICE displays DescriptionSpice-GTK is a library allowing access to remote displays over the SPICE protocol. At the moment It’s mainly used to access remote virtual machines. The Spice-GTK library provides a set of command line options which can be used to tweak some SPICE-specific option. UriThe most…
sphtriangulate – Delaunay or Voronoi construction of spherical lon,lat data Synopsissphtriangulate [ table ] [ ] [ ] [ ] [ unit ] [ nfile ] [ d|v ] [ ] [ [level] ] [ -b<binary> ] [ -d<nodata> ] [ -h<headers> ] [ -i<flags> ] [ -:[i|o] ] Note: No space is allowed between…
sphinx-quickstart – Sphinx documentation template generator Synopsissphinx-quickstart Descriptionsphinx-quickstart is an interactive tool that asks some questions about your project and then generates a complete documentation directory and sample Makefile to be used with sphinx-build(1). See Alsosphinx-build(1) AuthorGeorg Brandl <georg [at] python.org>, Armin Ronacher <armin.ronacher [at] active-4.com> et al. This manual page was initially written by…
sphinx-build – Sphinx documentation generator tool Synopsissphinx-build [options] <sourcedir> <outdir> [filenames …] Descriptionsphinx-build generates documentation from the files in <sourcedir> and places it in the <outdir>. sphinx-build looks for <sourcedir>/conf.py for the configuration settings. sphinx-quickstart(1) may be used to generate template files, including conf.py. sphinx-build can create documentation in different formats. A format is selected…
sphinx-apidoc – Sphinx API doc generator tool Synopsissphinx-apidoc [options] -o <outputdir> <sourcedir> [pathnames …] Descriptionsphinx-apidoc is a tool for automatic generation of Sphinx sources that, using the autodoc extension, document a whole package in the style of other automatic API documentation tools. sourcedir must point to a Python package. Any pathnames given are paths to…
sphinx-all – Sphinx documentation generator system manual IntroductionThis is the documentation for the Sphinx documentation builder. Sphinx is a tool that translates a set of reStructuredText source files into various output formats, automatically producing cross-references, indices etc. That is, if you have a directory containing a bunch of reST-formatted documents (and possibly subdirectories of docs…
sphinterpolate – Spherical gridding in tension of data on a sphere Synopsissphinterpolate [ table ] grdfile [ increment ] [ mode[/options] ] [ region ] [ [level] ] [ ] [ -bi<binary> ] [ -di<nodata> ] [ -h<headers> ] [ -i<flags> ] [ -r ] [ -:[i|o] ] Note: No space is allowed between the…
sphdistance – Make Voronoi distance, node, or nearest-neighbor grid on a sphere Synopsissphdistance [ table ] grdfile [ ] [ d|n|z[dist] ] [ increment ] [ unit ] [ nodetable ] [ voronoi.txt ] [ region ] [ [level] ] [ -b<binary> ] [ -d<nodata> ] [ -h<headers> ] [ -i<flags> ] [ -r ]…
sph2grd – Compute grid from spherical harmonic coefficients Synopsissph2grd [ table ] grdfile increment region [ [g|n] ] [ ] [ [k]filter ] [ [norm] ] [ ] [ [level] ] [ -bi<binary> ] [ -h<headers> ] [ -i<flags> ] [ -r ] [ -x[[-]n] ] Note: No space is allowed between the option flag…
ospent – Concatenates entities in an SGML/XML document Synopsis ospent [-ChnrRv] [-bbctf] [-csysid] [-ffile] [-Ddirectory] [sysid…]Descriptionospent (OpenSP print entity) prints the concatenation of the entities with system identifiers on the standard output. The following options are available: -bbctf, –bctf=bctf Use the BCTF with name bctf for output. -csysid, –catalog=sysid Map public identifiers and entity names…
spellintian – simple spellchecker based on Lintian’s data files Synopsisspellintian [–picky] [text-file…] DescriptionThe spellintian command parses one or more text files for spelling mistakes. It uses the same spellcheck algorithm and data set as lintian. If no file is specified on the command line, this command expects its input on stdin. Options–picky Also use the…
speexenc – The reference implementation speex encoder. Synopsisspeexenc [options] input_file output_file DescriptionEncodes input_file using Speex. It can read the WAV or raw files. input_file can be:filename.wav wav file filename.* Raw PCM file (any extension other than .wav) – stdinoutput_file can be:filename.spx Speex file – stdoutOptions-n, –narrowband Narrowband (8 kHz) input file -w, –wideband Wideband (16…