Author: Linux Manual

rbash – restricted bash, see bash(1) Restricted ShellSee Alsobash(1)

"razor-revoke" – Razor Revoking Agent Synopsis razor-revoke [options] file_with_mail_in_rfc822_format $ cat mail | razor-revoke $ razor-revoke ./mail $ razor-revoke -d ./mailDescription"razor-revoke" is the Razor Revoking Agent which is used for reporting messages as NOT spam to a Razor Nomination Server. For instance, it can be invoked if a check incorrectly marked a message as spam…

"razor-report" – Razor Reporting Agent Synopsis razor-report [options] file_with_mail_in_rfc822_format $ cat mail | razor-report $ razor-report ./mail $ razor-report -d ./mailDescription"razor-report" is the Razor Reporting Agent which is used for reporting spam messages to a Razor Nomination Server. "razor-report" should be generally called from a MUA, although there are no restrictions on invoking it from…

"razor-check" – Razor Filtering Agent Synopsis razor-check [options] [ mail1 [ mail2 .. ] ] $ cat mbox | razor-check $ razor-check ./mbox $ razor-check -d mbox mail.1 mail.2 mail.3Description"razor-check" checks a mail against the distributed Razor Catalogue by communicating with a Razor Catalogue Server. It should be invoked before the mail is delivered or…

"razor-admin" – Razor Registering Agent Synopsis razor-admin [options] [ -register | -create | -discover ]Description"razor-admin" is the Razor Agent that performs administrative functions, most notably registering (-register) Usage"razor-admin" must have one of the following arguments: "-register" Registers a new identity, used for authenticating with Razor Nomination Servers. Identities are a user + password pair stored…

raxml – convert argus(8) data to XML. CopyrightCopyright (c) 2000-2003 QoSient. All rights reserved. Synopsisraxml [ra-options] -e (Ascii | Encode64) [ expression ] DescriptionRaxml reads argus(8) data from an argus data source, and converts the contents to XML format, printing its output to stdout. Like all ra based clients, raxml supports a large number of…

rawtoppm – convert raw RGB bytes into a portable pixmap Synopsisrawtoppm [-headerskip N] [-rowskip N] [-rgb|-rbg|-grb |-gbr|-brg|-bgr ] [-interpixel|-interrow] width height [imagedata] DescriptionReads raw RGB bytes as input. Produces a portable pixmap as output. The input file is just RGB bytes. You have to specify the width and height on the command line, since the…

rawtopgm – convert raw grayscale bytes into a portable graymap Synopsisrawtopgm [-bpp [1|2]] [-littleendian] [-maxval N] [-headerskip N] [-rowskip N] [-tb|-topbottom] [width height] [imagefile] DescriptionReads raw grayscale values as input. Produces a PGM file as output. The input file is just a sequence of pure binary numbers, either one or two bytes each, either bigendian…

rawshark – Dump and analyze raw pcap data Synopsisrawshark [ -d <encap:dlt>|<proto:protoname> ] [ -F <field to display> ] [ -h ] [ -l ] [ -n ] [ -N <name resolving flags> ] [ -o <preference setting> ] … [ -p ] [ -r <pipe>|- ] [ -R <read (display) filter> ] [ -s ] [ -S <field format> ] [ -t ad|a|r|d|e ] [ -v ] DescriptionRawshark reads a stream of packets from a file or pipe, and prints a line describing its output, followed by a set of matching fields for…

rawlog-grabber – Collects data from robotic sensors Synopsisrawlog-grabber config_file.ini DescriptionThis program creates a thread for each sensor declared in the config file and then saves the timestamp-ordered observations to a rawlog file. The valuable utiliy of this program is to collect datasets from mobile robots for off-line processing. BugsPlease report bugs at http://sourceforge.net/tracker/?group_id=205280&atid=993006 See AlsoThe…

rawdog – an RSS Aggregator Without Delusions Of Grandeur Synopsisrawdog [options] Descriptionrawdog is a feed aggregator for Unix-like systems. rawdog uses the Python feedparser module to retrieve articles from a number of feeds in RSS, Atom and other formats, and writes out a single HTML file, based on a template either provided by the user…

raw2tiff – create a TIFF file from a raw data Synopsisraw2tiff [ options ] input.raw output.tif Descriptionraw2tiff converts a raw byte sequence into TIFF. By default, the TIFF image is created with data samples packed (PlanarConfiguration=1), compressed with the PackBits algorithm (Compression=32773), and with each strip no more than 8 kilobytes. These characteristics can overridden,…

raw2hdf – Create an .hdf hard disk image from a raw data file Synopsisraw2hdf rawfile hdffile Descriptionraw2hdf converts a binary dump of a hard disk’s data into an IDE disk image in .hdf format for use with Sinclair ZX Spectrum emulators. Options-v version specifies the version of .hdf image to be created. Valid values are…

ratop – display and update sorted network flow data Synopsisratop [raoptions] [— filter-expression] DescriptionRatop reads argus(8) data from an argus-file, or from a remote data source, and periodically displays a sorted list of network flow records. When read from a file, ratop displays the resulting flow caches when the file is completed, updating its status…

rasview – Raster file previewer for the X Window System. Synopsisrasview [ -toolkitoption … ] [ -ifmt format ] [ -movie ] [ -pal palette_file ] [ -quiet ] [ -Version ] [ file.ext | – ] Descriptionrasview displays raster imagery from a file into an X window. By default rasview determines the format of…

rasttopnm – convert a Sun rasterfile into a portable anymap Synopsisrasttopnm [rastfile] DescriptionReads a Sun rasterfile as input. Produces a portable anymap as output. The type of the output file depends on the input file – if it’s black & white, a pbm file is written, else if it’s grayscale a pgm file, else a…

rastrip – strip argus(8) data file. Synopsisrastrip [-M [replace] [+|-]dsr [-M …]] [raoptions] [— filter-expression] DescriptionRastrip reads argus data from an argus-data source, strips the records based on the criteria specified on the command line, and outputs a valid argus-stream. This is useful to reduce the size of argus data files. Rastrip always removes argus…

rastream – stream block processor for argus(8) data. Synopsisrastream [[-M splitmode] [splitmode options]] [-f file processing program -B secs] [raoptions] [— filter-expression] DescriptionRastream reads argus data from an argus-data source, and splits the resulting output into consecutive sections of records based on size, count time, or flow event, writing the output into a set of…

Raster data processing in GRASS GISRaster maps in generalThe geographic boundaries of the raster map are described by the north, south, east, and west fields. These values describe the lines which bound the map at its edges. These lines do NOT pass through the center of the grid cells at the edge of the map,…

3D Raster data (voxel) in GRASS GIS3D Raster (voxel) importThe module r3.in.ascii supports generic x,y,z import. Alternatively, voxels can be generated from 3D point vector data (v.to.rast3). Always the full map is imported. Volumes can also be created based on 2D elevation map(s) and value raster map(s) (r.to.rast3elev). Alternatively, a volume can be composed of…