termscu – DICOM termination SCU Synopsistermscu [options] peer portDescriptionThe termscu application implements a Service Class User (SCU) for DCMTK’s private Shutdown SOP Class. It tries to negotiate this private Shutdown SOP Class with a Service Class Provider (SCP) which (if this feature is implemented) will immediately shutdown after refusing the association. The application can be…
Terminator – Multiple GNOME terminals in one window Synopsisterminator [options] DescriptionThis manual page documents Terminator, a terminal emulator application. Terminator is a program that allows users to set up flexible arrangements of GNOME terminals. It is aimed at those who normally arrange lots of terminals near each other, but don’t want to use a frame…
teredo-mire – Stateless Teredo IPv6 responder Synopsisteredo-mire DescriptonTeredo-Mire is a test back-end for the Teredo IPv6 tunneling protocol. It listens for requests from other Teredo clients or IPv6 nodes (through Teredo relays) and answers to them statelessly. Currently only ICMPv6 Echo Requests ("pings") are handled. Options-h or –help Display some help and exit. -V or…
tempfile – create a temporary file in a safe manner Synopsistempfile [-d DIR] [-p STRING] [-s STRING] [-m MODE] [-n FILE] [–directory=DIR] [–prefix=STRING] [–suffix=STRING] [–mode=MODE] [–name=FILE] [–help] [–version] Descriptiontempfile creates a temporary file in a safe manner. It uses mkstemps(3) to choose the name and opens it with O_RDWR | O_CREAT | O_EXCL. The filename…
Linux NetKit (0.17) Nametelnet – user interface to the TELNET protocol Synopsistelnet [-468ELadr ] [-S tos ] [-b address ] [-e escapechar ] [-l user ] [-n tracefile ] [host [port ] ] DescriptionThe telnet command is used for interactive communication with another host using the TELNET protocol. It begins in command mode, where it…
Linux NetKit (0.17) Nametelnet – user interface to the TELNET protocol Synopsistelnet [-468ELadr ] [-S tos ] [-b address ] [-e escapechar ] [-l user ] [-n tracefile ] [host [port ] ] DescriptionThe telnet command is used for interactive communication with another host using the TELNET protocol. It begins in command mode, where it…
telnet-probe – lightweight telnet-like port probe Synopsis$PCP_BINADM_DIR/telnet-probe [-c] [-v] host port Descriptiontelnet-probe allows the pmdashping(1) daemons to establish connections to arbitrary local and remote service-providing daemons so that response time and service availability information can be obtained. The required host and port number arguments have the same meaning as their telnet(1) equivalents. The -c option…
Telescope mount position control Synopsis telescope [options] [set | get] [commands] DescriptionThe options are as follows: options: get: (specify nothing, one or more option) -ra print Right Ascension in degrees -dec print Declination in degrees -a print Azimuth (180 deg = sud) -z print Altitude -ha print Hour Angle -jd print Julian date -synchro sychronisation,(1=values are probably correct) -status print status of…
telegram-desktop – official telegram messaging application Synopsis[ -startintray ] [ -many ] [ -debug ] [ — URI ] DescriptionThis manual page documents how to run Telegram Desktop, official Telegram client. OptionsThe program understands various parameters, some of them are described in the present document. -startintray Do not show the main window, just start in…
tek2plot – translate Tektronix files to other graphics formats Synopsistek2plot [ options ] [ files ] Descriptiontek2plot translates Tektronix graphics files to other formats, or displays them on an X Window System display. The output format is specified with the -T option. The possible output formats are the same as those supported by graph(1), plot(1),…
tegrarcm – tegra firmware download utility Synopsistegrarcm [ options ] DescriptionThis program is used to send code to a Tegra device in recovery mode. It does not supported locked devices with an encrypted boot key, only open devices such as the ventana or cardhu reference boards. It is not capable of flashing firmware to a…
tee – read from standard input and write to standard output and files Synopsistee [,OPTION/]… [,FILE/]… DescriptionCopy standard input to each FILE, and also to standard output. -a, –append append to the given FILEs, do not overwrite -i, –ignore-interrupts ignore interrupt signals -p diagnose errors writing to non pipes –output-error[=,MODE/] set behavior on write error….
teckit_compile – manual page for command line error at –version Synopsisteckit_compile [,-u/] [,-x/] [,-z/] ,mapping_description /[,-o compiled_table/] OptionsRequired argument: source mapping description (.map) file Optional arguments: -ofile output compiled table (.tec) file ("-" for stdout) -u read source text as UTF8 even if no BOM found -x generate XML representation rather than compiled table -z…
teachjove – learn how to use the JOVE editor Synopsisteachjove [ -s sharedir ] DescriptionTEACHJOVE is a simple program that calls up the JOVE editor on a special file that is an interactive tutorial for the JOVE editor. Once in JOVE all you do is follow the instructions and by doing so you will learn all…
tcxmlcheck – Check information in smil input file Synopsistcxmlcheck [ options ] [ – ] Copyrighttcxmlcheck is Copyright (C) by Malanchini Marzio Descriptiontcxmlcheck Check a smil input file. Most of the options are used by transcode at run time. Options-i name Specify the name of the input video/audio smil file [stdin]. -p name Specify the…
tcutest – test cases of the utility API DescriptionThe command `tcutest‘ is a utility for facility test and performance test. This command is used in the following format. `rnum‘ specifies the number of iterations. `anum‘ specifies the initial number of elements of array. `bnum‘ specifies the number of buckets. tcutest xstr rnum Perform test of…
tcutest – test cases of the on-memory database API DescriptionThe command `tcumttest‘ is a utility for facility test under multi-thread situation. This command is used in the following format. `rnum‘ specifies the number of iterations. `bnum‘ specifies the number of buckets. tcumttest combo [-rnd]tnumrnum[bnum] [-tr] Peform storing, retrieving, and removing in turn. tcumttest typical [-nc][-rr…
tcucodec – popular encoders and decoders DescriptionThe command `tcucodec‘ is a tool to use encoding and decoding features. This command is used in the following format. `file‘ specifies a input file. If it is omitted, the standard input is read. tcucodec url [-d][-br][-rs base][file] Perform URL encoding and its decoding. tcucodec base [-d][file] Perform Base64…
tcttest – test cases of the table database API DescriptionThe command `tcttest‘ is a utility for facility test and performance test. This command is used in the following format. `path‘ specifies the path of a database file. `rnum‘ specifies the number of iterations. `bnum‘ specifies the number of buckets. `apow‘ specifies the power of the…
tctmttest – test cases of the table database API DescriptionThe command `tctmttest‘ is a utility for facility test under multi-thread situation. This command is used in the following format. `path‘ specifies the path of a database file. `tnum‘ specifies the number of running threads. `rnum‘ specifies the number of iterations. `bnum‘ specifies the number of…