mdb-array – Export data in an MDB database table to a C array. Synopsismdb-array database tableDescriptionmdb-array is a utility program distributed with MDB Tools. mdb-array prints a C source code file to stdout, containing an array representing the data of the specified table. EnvironmentMDB_JET3_CHARSET Defines the charset of the input JET3 (access 97) file. Default…
mdatopbm – convert a Microdesign .mda or .mdp file into a portable bitmap Synopsismdatopbm [-a][-d][-i][—] [ mdafile ] DescriptionReads a MicroDesign file as input. Reads from stdin if input file is omitted. Produces a portable bitmap as output. Options-a Output the PBM in ASCII rather than binary. -d Double the height of the output file,…
mdassembler – Compile documentation for use in monodoc browser Synopsismdassembler OPTIONS* DIRS+ Descriptionmdassembler has been obsoleted by mdoc(1). See the mdoc-assemble(1) man page. mdassembler is a program that creates .tree and .zip files for use in the monodoc documentation browser. The .tree and .zip files are copied into monodoc’s sources directory, and reside with a…
md5sum – compute and check MD5 message digest Synopsismd5sum [,OPTION/]… [,FILE/]… DescriptionPrint or check MD5 (128-bit) checksums. With no FILE, or when FILE is -, read standard input. -b, –binary read in binary mode -c, –check read MD5 sums from the FILEs and check them –tag create a BSD-style checksum -t, –text read in text…
md5sum – compute and check MD5 message digest Synopsismd5sum [,OPTION/]… [,FILE/]… DescriptionPrint or check MD5 (128-bit) checksums. With no FILE, or when FILE is -, read standard input. -b, –binary read in binary mode -c, –check read MD5 sums from the FILEs and check them –tag create a BSD-style checksum -t, –text read in text…
md5pass – Create an MD5 password hash Synopsismd5pass [PASSWORD] [SALT] Descriptionmd5pass creates an MD5 password hash. In the absence of a salt value on the command line, a random salt vector will be generated. See Alsosyslinux(1) HomepageMore information about the Syslinux project can be found on the homepage at <http://syslinux.zytor.com/>. Authormd5pass was written by H….
md5deep – Compute and compare MD5 message digests sha1deep – Compute and compare SHA-1 message digests sha256deep – Compute and compare SHA-256 message digests sha3deep – Compute and compare SHA-3-256 message digests tigerdeep – Compute and compare Tiger message digests whirlpooldeep – Compute and compare Whirlpool message digests Synopsismd5deep -v | -V | -h md5deep…
md2html – Convert markdown to HTML SynopsisUsage: md2html [options] <file> Options–dialect=DIALECT Valid dialects are Gruber (the default) or Maruku Enable growl notificationsReporting BugsPlease report bugs on the GitHub issue tracker: <https://github.com/evilstreak/markdown-js/issues>
mcview – Internal file viewer of GNU Midnight Commander. Usagemcview [-bcCdfhstVx?] file Descriptionmcview is a link to mc, the main GNU Midnight Commander executable. Executing GNU Midnight Commander under this name requests staring the internal viewer and opening the file specified on the command line. Options-b Force black and white display. -c Force color mode…
MCU 8051 IDE – Itegrated development enviroment for MCS-51 based microcontrollers Synopsismcu8051ide [–help] [-h] [–compile asm_file] [–iram-size size] [–code-size size] [–xram-size size] [–no-opt] [–quiet] [-q] [–nosplash] [–nocolor] [-n] [–version] [-V] [–defaults] [–disassemble] [–minimalized] [–config-file filename] [–check-libraries] [–ignore-last-session] [–open-project project] [–reset-user-settings] [–hex2bin input output] [–bin2hex input output] [–sim2hex input output] [–sim2bin input output] [–normalize-hex input] [–auto-indent…
mcs – Mono C# Compiler Synopsismcs [option] [source-files] Descriptionmcs is the Mono C# compiler, an implementation of the ECMA-334 language specification. You can pass one or more options to drive the compiler, and a set of source files. Extra options or arguments can be provided in a response file. Response files are referenced by prepending…
mcrypt, mdecrypt – encrypt or decrypt files Synopsismcrypt [ -dLFubhvrzp ] [-a algorithm] [-c config_file] [-m mode] [-s keysize] [-o keymode] [-k key1 key2 …] [-f keyfile] [ filename … ] mdecrypt [ -LFusbhvzp ] [-a algorithm] [-c config_file] [-m mode] [-s keysize] [-o keymode] [-k key1 key2 …] [-f keyfile] [ filename … ]…
mcpp – Matsui CPP, an alternative C preprocessor Synopsismcpp [options] [<infile> [<outfile>]] Descriptionmcpp is a C/C++ preprocessor with the highest conformance which implements C90, C99 and C++98. mcpp has plentiful diagnostics and many #pragmas. It is useful to check portability of your program, and also useful to debug complicated macro. This is a man-page for…
mcopy – copy MSDOS files to/from Unix Note of warningThis manpage has been automatically generated from mtools’s texinfo documentation, and may not be entirely accurate or complete. See the end of this man page for details. DescriptionThe mcopy command is used to copy MS-DOS files to and from Unix. It uses the following syntax: …
mcookie – generate magic cookies for xauth Synopsismcookie [options] Descriptionmcookie generates a 128-bit random hexadecimal number for use with the X authority system. Typical usage: xauth add :0 . mcookie The "random" number generated is actually the MD5 message digest of random information coming from one of the sources getrandom(2) system call, /dev/urandom, /dev/random, or…
mconfig, – Utility for modifying .NET configuration files Synopsismconfig [options] command [command_parameters] Descriptionmconfig can be used to edit .NET configuration files, by adding "features" (that is sets of xml statements) defined in one of the config files read by mconfig. The config file can also define layouts of default configuration files, which may be useful…
mcomp – Compares two files using mtools Synopsismcomp file-on-floppy local-file Descriptionmcomp compares two files, the first one must be on a floppy disk so it can be accessed via mtools. It is not strictly necessary on Debian GNU/Linux, because the diffutils cmp(1) program provides the same capability after copying the file locally with mcopy file…
mclasserase – erase memory cards Note of warningThis manpage has been automatically generated from mtools’s texinfo documentation, and may not be entirely accurate or complete. See the end of this man page for details. DescriptionThe mclasserase command is used to wipe memory cards by overwriting it three times: first with 0xff, then with 0x00, then…
mckey – RDMA CM multicast setup and simple data transfer test. Synopsismckey -m multicast_address [-s] [-b bind_address] [-c connections] [-C message_count] [-S message_size] [-p port_space] mckey -m multicast_address -s [-b bind_address] [-c connections] [-C message_count] [-S message_size] [-p port_space] mckey -M unmapped_multicast_address -b bind_address [-s] [-c connections] [-C message_count] [-S message_size] [-p port_space]DescriptionEstablishes a set…
mcheck – verify all files on an MS-DOS formatted disk Synopsismcheck [msdosdrive] Descriptionmcheck is a script that verifies all files on a MS-DOS formatted disk by reading them using mtype(1) The optional argument specifies the MS-DOS drive letter of the disk to be checked. A: is used by default. LicenseCopyright (C) 1994 David C. Niemi…