Author: Linux Manual

dh_builddeb – build Debian binary packages Synopsisdh_builddeb [debhelper options] [–destdir=directory] [–filename=name] [— params] Descriptiondh_builddeb simply calls dpkg-deb(1) to build a Debian package or packages. It will also build dbgsym packages when dh_strip(1) and dh_gencontrol(1) have prepared them. It supports building multiple binary packages in parallel, when enabled by DEB_BUILD_OPTIONS. When the Rules-Requires-Root field is not (effectively) binary-targets,…

dh_bugfiles – install bug reporting customization files into package build directories Synopsisdh_bugfiles [-A] [debhelper options] Descriptiondh_bugfiles is a debhelper program that is responsible for installing bug reporting customization files (bug scripts and/or bug control files and/or presubj files) into package build directories. Filesdebian/package.bug-script This is the script to be run by the bug reporting program for…

dh_bash-completion – install bash completions for package Synopsisdh_bash-completion [debhelper options] Descriptiondh_bash-completion is a debhelper program that is responsible for installing completions for bash, usable installing the “bash-completion” package. If a file named debian/package.bash-completion exists, then different actions are performed, depending on its format. It can be a proper completion snippet, and in that case it…

dh_autotools-dev_updateconfig – update config.sub and config.guess Synopsisdh_autotools-dev_updateconfig [debhelper options] DescriptionDeprecated: dh_autotools-dev_updateconfig and dh_autotools-dev_restoreconfig are deprecated and replaced by dh_update_autotools_config(1) and dh_clean(1) from debhelper. Please replace all uses of dh_autotools-dev_updateconfig with dh_update_autotools_config and then remove any use of dh_autotools-dev_restoreconfig. dh_autotools-dev_updateconfig replaces all occurrences of config.sub and config.guess in the source tree by the up-to-date versions found…

dh_autotools-dev_restoreconfig – restore config.sub and config.guess Synopsisdh_autotools-dev_restoreconfig [debhelper options] DescriptionDeprecated: dh_autotools-dev_updateconfig and dh_autotools-dev_restoreconfig are deprecated and replaced by dh_update_autotools_config(1) and dh_clean(1) from debhelper. Please replace all uses of dh_autotools-dev_updateconfig with dh_update_autotools_config and then remove any use of dh_autotools-dev_restoreconfig. dh_autotools-dev_restoreconfig restores the original config.sub and config.guess files that have been backed up by dh_autotools-dev_updateconfig under the…

dh_autoreconf_clean – Clean all changes made by dh_autoreconf Synopsisdh_autoreconf_clean [debhelper options] Descriptiondh_autoreconf_clean removes all files which have been created or changed during the autoreconf call executed by dh_autoreconf(1). It also reverts any ltmain.sh patch applied by dh_autoreconf. See Alsodebhelper(7), dh_autoreconf(1), dh-autoreconf(7) AuthorJulian Andres Klode <jak [at] debian.org>

dh_autoreconf – Call autoreconf -f -i and keep track of the changed files. Synopsisdh_autoreconf [debhelper options] [-Xitem] [–mode=mode] [program — params] Descriptiondh_autoreconf is responsible for calling autoreconf and creating the files debian/autoreconf.before and debian/autoreconf.after which contain checksums of all files before/after the build. It is complemented by dh_autoreconf_clean which creates a list of all changed and added…

dh_auto_test – automatically runs a package’s test suites Synopsisdh_auto_test [build system options] [debhelper options] [— params] Descriptiondh_auto_test is a debhelper program that tries to automatically run a package’s test suite. It does so by running the appropriate command for the build system it detects the package uses. For example, if there’s a Makefile and it contains a test or…

dh_auto_install – automatically runs make install or similar Synopsisdh_auto_install [build system options] [debhelper options] [— params] Descriptiondh_auto_install is a debhelper program that tries to automatically install built files. It does so by running the appropriate command for the build system it detects the package uses. For example, if there’s a Makefile and it contains a install target, then this…

dh_auto_configure – automatically configure a package prior to building Synopsisdh_auto_configure [build system options] [debhelper options] [— params] Descriptiondh_auto_configure is a debhelper program that tries to automatically configure a package prior to building. It does so by running the appropriate command for the build system it detects the package uses. For example, it looks for and runs a ./configure script,…

dh_auto_clean – automatically cleans up after a build Synopsisdh_auto_clean [build system options] [debhelper options] [— params] Descriptiondh_auto_clean is a debhelper program that tries to automatically clean up after a package build. It does so by running the appropriate command for the build system it detects the package uses. For example, if there’s a Makefile and it contains a distclean,…

dh_auto_build – automatically builds a package Synopsisdh_auto_build [build system options] [debhelper options] [— params] Descriptiondh_auto_build is a debhelper program that tries to automatically build a package. It does so by running the appropriate command for the build system it detects the package uses. For example, if a Makefile is found, this is done by running make (or MAKE, if…

dh – debhelper command sequencer Synopsisdh sequence [–with addon[,addon …]] [–list] [debhelper options] Descriptiondh runs a sequence of debhelper commands. The supported sequences correspond to the targets of a debian/rules file: build-arch, build-indep, build, clean, install-indep, install-arch, install, binary-arch, binary-indep, and binary. Override TargetsA debian/rules file using dh can override the command that is run at…

gawk – pattern scanning and processing language Synopsisgawk [ POSIX or GNU style options ] -f program-file [ — ] file … gawk [ POSIX or GNU style options ] [ — ] program-text file … pgawk [ POSIX or GNU style options ] -f program-file [ — ] file … pgawk [ POSIX or…

dfutool – Device Firmware Upgrade utility Synopsisdfutool [ options ] < command > Descriptiondfutool is used to verify, archive and upgrade firmware files. Options-h Gives a list of possible commands. -d <device> The command specifies the device to use.Commandsverify <dfu-file> Display information about the firmware file. modify <dfu-file> Change DFU specific values in the firmware…

dfu-tool – write firmware to DFU devices Synopsisdfu-tool [CMD] DescriptionThis manual page documents briefly the dfu-tool command. dfu-tool allows a user to write various kinds of firmware onto devices supporting the USB Device Firmware Upgrade protocol. This tool can be used to switch the device from the normal runtime mode to `DFU mode’ which allows…

dftest – Shows display filter byte-code, for debugging dfilter routines. Synopsisdftest [ <filter> ] Descriptiondftest is a simple tool which compiles a display filter and shows its bytecode. Optionsfilter The display filter expression. If needed it has to be quoted.ExamplesShow how the IP protocol is filtered: dftest ipShows how frame 150 is filtered: dftest "frame.number == 150"See…

dfbg – DirectFB background configuration tool Synopsisdfbg [options] <filename>|<color> Descriptiondfbg is a small utility to configure the background of the DirectFB desktop. It loads the specified image and sets it as background image. dfbg requires DirectFB with the multi-application core enabled. Options-c, –color Set color fill mode using <color> in AARRGGBB format (hexadecimal). The alpha…

df – report file system disk space usage Synopsisdf [,OPTION/]… [,FILE/]… DescriptionThis manual page documents the GNU version of df. df displays the amount of disk space available on the file system containing each file name argument. If no file name is given, the space available on all currently mounted file systems is shown. Disk…

dex Synopsisdex [-c command] [-t tag] [-r rcfile] [-V] [file]… DescriptionA small and flexible text editor. Command Line Options-c command Run this command after reading the rc file and opening any files specified on command line. -r rcfile Read this rc file instead of ~/.dex/rc or /usr/share/dex/rc. -t tag Go to tag. Requires tags file…