ldns-config – show compiler and linker flags for ldns usage. Synopsisldns-config [ OPTIONS ] DescriptionWhen writing programs using ldns, you have to tell the compiler where to look for include files and what libraries from which location to link to. ldns-config can be used to find out what flags to use with the C compiler…
ldns-compare-zones – read and compare two zonefiles and print differences Synopsisldns-compare-zones [-c] [-i] [-d] [-z] [-s] ZONEFILE1 ZONEFILE2 Descriptionldns-compare-zones reads two DNS zone files and prints number of differences. Output is formated to: +NUM_INS -NUM_DEL ~NUM_CHGThe major comparison is based on the owner name. If an owner name is present in zonefile 1, but not…
ldns-chaos – give some information about a nameserver Synopsisldns-chaos NAMESERVER Descriptionldns-chaos retrieves all the addresses of the nameserver and then queries each address for its version.bind and hostname.bind. ldns-chaos is a bit more complex than ldns-mx. Optionsldns-chaos has no options. AuthorWritten by the ldns team as an example for ldns usage. Reporting BugsReport bugs to…
ldmtool – A tool to manage Microsoft Windows dynamic disks Synopsis ldmtool [options] ldmtool [options] scan [device…] ldmtool [options] show diskgroup {disk group GUID} ldmtool [options] show {volume | partition | disk} {disk group GUID} {object name} ldmtool [options] {create | remove} all ldmtool [options] {create | remove} volume {disk group GUID} {volume name}Options-d|–device device…
ldif – manipulates an LDIF stream by adding a column with the defined attribute type Synopsisldif [-b] attrtype DescriptionManipulates an LDIF stream by adding a column with the defined attribute type OptionsA summary of options is included below: -b Output base64 binary formatUsageldif dn < /tmp/ldif Authorldif was written by the 389 Project. Reporting BugsReport…
ldd – print shared object dependencies Synopsisldd [option]… file… Descriptionldd prints the shared objects (shared libraries) required by each program or shared object specified on the command line. An example of its use and output (using sed(1) to trim leading white space for readability in this page) is the following: $ ldd /bin/ls | sed…
ldclt – load test program for LDAP Synopsysldclt [-qQvV] [-E <max errors>] [-b <base DN>] [-h <host>] [-p <port>] [-t <timeout>] [-D <bind DN>] [-w <passwd>] [-o <SASL option>] [-e <execParams>] [-a <max pending>] [-n <nb threads>] [-i <nb times>] [-N <nb samples>] [-I <err number>] [-T <total>] [-r <low> -R <high>] [-f <filter>] [-s…
ldbsearch – Search for records in a LDB database Synopsis ldbsearch [-h] [-s base|one|sub] [-b basedn] [-i] [-H LDB-URL] [expression] [attributes]Descriptionldbsearch searches a LDB database for records matching the specified expression (see the ldapsearch(1) manpage for a description of the expression format). For each record, the specified attributes are printed. Options-h Show list of available…
ldbrename – Edit LDB databases using your favorite editor Synopsis ldbrename [-h] [-o options] {olddn} {newdn}Descriptionldbrename is a utility that allows you to rename trees in an LDB database based by DN. This utility takes two arguments: the original DN name of the top element and the DN to change it to. Options-h Show list…
ldbmodify – Modify records in a LDB database Synopsis ldbmodify [-H LDB-URL] [ldif-file]Descriptionldbmodify changes, adds and deletes records in a LDB database. The changes that should be made to the LDB database are read from the specified LDIF-file. If – is specified as the filename, input is read from stdin. For now, see ldapmodify(1) for…
ldbedit – Edit LDB databases using your preferred editor Synopsis ldbedit [-?] [–usage] [-s base|one|sub] [-b basedn] [-a] [-e editor] [-H LDB-URL] [expression] [attributes…]Descriptionldbedit is a utility that allows you to edit LDB entries (in tdb files, sqlite files or LDAP servers) using your preferred editor. ldbedit generates an LDIF file based on your query,…
ldbdel – Command-line program for deleting LDB records Synopsis ldbdel [-h] [-H LDB-URL] [dn] […]Descriptionldbdel deletes records from an ldb(3) database. It deletes the records identified by the dn’s specified on the command-line. ldbdel uses either the database that is specified with the -H option or the database specified by the LDB_URL environment variable. Options-h…
ldbadd – Command-line utility for adding records to an LDB Synopsis ldbadd [-h] [-H LDB-URL] [ldif-file1] [ldif-file2] […]Descriptionldbadd adds records to an ldb(3) database. It reads the ldif(5) files specified on the command line and adds the records from these files to the LDB database, which is specified by the -H option or the LDB_URL…
ldbsearch – Search for records in a LDB database Synopsis FCldbsearchF[] [-h] [-s base|one|sub] [-b basedn] [-i] [-H LDB-URL] [expression] [attributes]Descriptionldbsearch searches a LDB database for records matching the specified expression (see the ldapsearch(1) manpage for a description of the expression format). For each record, the specified attributes are printed. Options-h Show list of available…
ldbrename – Edit LDB databases using your favorite editor Synopsis FCldbrenameF[] [-h] [-o options] {olddn} {newdb}Descriptionldbrename is a utility that allows you to rename trees in an LDB database based by DN. This utility takes two arguments: the original DN name of the top element and the DN to change it to. Options-h Show list…
ldbmodify – Modify records in a LDB database Synopsis FCldbmodifyF[] [-H LDB-URL] [ldif-file]Descriptionldbmodify changes, adds and deletes records in a LDB database. The changes that should be made to the LDB database are read from the specified LDIF-file. If – is specified as the filename, input is read from stdin. For now, see ldapmodify(1) for…
ldbedit – Edit LDB databases using your preferred editor Synopsis FCldbeditF[] [-?] [–usage] [-s base|one|sub] [-b basedn] [-a] [-e editor] [-H LDB-URL] [expression] [attributes…]Descriptionldbedit is a utility that allows you to edit LDB entries (in tdb files, sqlite files or LDAP servers) using your preferred editor. ldbedit generates an LDIF file based on your query,…
ldbdel – Command-line program for deleting LDB records Synopsis FCldbdelF[] [-h] [-H LDB-URL] [dn] […]Descriptionldbdel deletes records from an ldb(7) database. It deletes the records identified by the dn’s specified on the command-line. ldbdel uses either the database that is specified with the -H option or the database specified by the LDB_URL environment variable. Options-h…
ldbadd – Command-line utility for adding records to an LDB Synopsis FCldbaddF[] [-h] [-H LDB-URL] [ldif-file1] [ldif-file2] […]Descriptionldbadd adds records to an ldb(7) database. It reads the ldif(5) files specified on the command line and adds the records from these files to the LDB database, which is specified by the -H option or the LDB_URL…
ldapwhoami – LDAP who am i? tool Synopsisldapwhoami [-V[V]] [-d debuglevel] [-n] [-v] [-x] [-D binddn] [-W] [-w passwd] [-y passwdfile] [-H ldapuri] [-h ldaphost] [-p ldapport] [-e [!]ext[=extparam]] [-E [!]ext[=extparam]] [-o opt[=optparam]] [-O security-properties] [-I] [-Q] [-N] [-U authcid] [-R realm] [-X authzid] [-Y mech] [-Z[Z]] Descriptionldapwhoami implements the LDAP "Who Am I?" extended operation. ldapwhoami opens a connection to an LDAP server, binds, and performs a whoami operation….