gtk-launch – Launch an application Synopsis gtk-launch [OPTION…] APPLICATION [URI…]Descriptiongtk-launch launches an application using the given name. The application is started with proper startup notification on a default display, unless specified otherwise. gtk-launch takes at least one argument, the name of the application to launch. The name should match application desktop file name, as residing…
gtk-gnutella – A Gnutella client for Gtk+ Synopsisgtk-gnutella Descriptiongtk-gnutella is a GTK+ Gnutella client for Unix. It supports both searching and sharing with the 0.6 version of the Gnutella protocol and includes support for numerous protocol improvements and additions that have been added to the Gnutella network since. The Gnutella network allows users to search…
gnash, gtk-gnash, qt4-gnash, dump-gnash, fb-gnash, sdl-gnash, gnash-gtk-launcher, gnash-qt-launcher – GNU Flash (SWF) Player Synopsisgnash [option]… [URL]DescriptionRun the SWF movie player. -h, –help Print usage info. -V, –version Print the version number, and the configuration, of the Gnash player. Please provide this information when submitting bug reports. -s factor, –scale factor Scale the movie up/down by…
gtk-encode-symbolic-svg – Symbolic icon conversion utility Synopsis gtk-encode-symbolic-svg [OPTION…] PATH WIDTHxHEIGHTDescriptiongtk-encode-symbolic-svg converts symbolic svg icons into specially prepared png files. GTK+ can load and recolor these pngs, just like original svgs, but loading them is much faster. PATH is the name of a symbolic svg file, WIDTHxHEIGHT are the desired dimensions for the generated png…
gtk-config – script to get information about the installed version of GTK+ Synopsisgtk-config [–prefix[=DIR]] [–exec-prefix[=DIR]] [–version] [–libs] [–cflags] Descriptiongtk-config is a tool that is used to configure to determine the compiler and linker flags that should be used to compile and link programs that use GTK+. It is also used internally to the .m4 macros…
gtk-chtheme – Gtk+ 2.0 theme preview and selection made slick. Synopsisgtk-chtheme DescriptionAs the name suggests, this little program lets you change your Gtk+ 2.0 theme. The aim is to make theme preview and selection as slick as possible. Themes installed on the system are presented for selection and previewed on the fly. A large variety…
gtk-builder-tool – GtkBuilder file utility Synopsis gtk-builder-tool [COMMAND] [OPTION…] FILEDescriptiongtk-builder-tool can perform various operations on GtkBuilder .ui files. You should always test the modified .ui files produced by gtk-builder-tool before using them in production. CommandsThe following commands are understood: validate Validates the .ui file and report errors to stderr. simplify Simplifies the .ui file by…
gtk-builder-convert – Glade file conversion utility Synopsis gtk-builder-convert [–skip-windows] [–target-version version] [–root name] {input} {output}Descriptiongtk-builder-convert converts glade files into XML files which can be loaded with GtkBuilder. It expects the name of a glade file as the first argument, and writes its output the file specified as the second argument. Options–skip-windows, -w Convert everything but GtkWindow subclasses….
gThumb – an image viewer and browser for GNOME Synopsisgthumb [–help] [–version] [-f] [–fullscreen] [-s] [–slideshow] [–import-photos] [directory] [filename] … DescriptionWith gThumb you can browse your hard disk viewing thumbnails of image files. It also lets you view single files (including GIF animations), add comments to images, organize images in catalogs, print images, view slideshows,…
gtg_new_task – Adds a task to the Getting Things GNOME! organizer Synopsisgtg_new_task Descriptiongtg_new_task creates a new task in the Getting Things GNOME! organizer for the GNOME desktop via the DBUS message bus. Getting Things GNOME! must be running for the command to work. FilesNone See Alsogtg (1) BugsPlease report any bug you may experience to…
gtg – Getting Things Gnome!, an organizer for the GNOME desktop Synopsisgtg DescriptionGetting Things GNOME! is an organizer for the GNOME desktop environment. GTG focuses on usability and ease of use. Its main objective is to provide a simple and yet flexible organization tool for life and work. GTG uses a very handy system for…
gtf – calculate VESA GTF mode lines Synopsisgtf h-resolution v-resolution refresh [-v|–verbose] [-f|–fbmode] [-x|–xorgmode] DescriptionGtf is a utility for calculating VESA GTF modes. Given the desired horizontal and vertical resolutions and refresh rate (in Hz), the parameters for a matching VESA GTF mode are printed out. Two output formats are supported: mode lines suitable for…
gtester – test running utility Synopsis gtester [OPTION…] [testprogram]Descriptiongtester is a utility to run unit tests that have been written using the GLib test framework. Since GLib 2.62, gtester-report is deprecated. Use TAP for reporting test results instead, and feed it to the test harness provided by your build system. When called with the -o…
gtester-report – test report formatting utility Synopsis gtester-report [option…] [gtester-log]Descriptiongtester-report is a script which converts the XML output generated by gtester into HTML. Since GLib 2.62, gtester-report is deprecated. Use TAP for reporting test results instead, and feed it to the test harness provided by your build system. Options-h, –help print help and exit -v,…
tbl – format tables for troff Synopsis[ -Cv ] [file …] DescriptionThis manual page describes the GNU version of tbl, which is part of the groff document formatting system. tbl compiles descriptions of tables embedded within troff input files into commands that are understood by troff. Normally, it should be invoked using the -t option…
gtags – create tag files for global. Synopsisgtags [-ciIOqvw][-f file][-n number][dbpath] DescriptionGtags recursively collect the source files under the current directory, pickup symbols and write the cross-reference data into tag files (‘GTAGS’, ‘GRTAGS’, ‘GSYMS’ and ‘GPATH’). You should execute this command at the root of the source tree. C, C++, yacc, java, PHP and Assembly…
gtags-parser – print cross reference list for gtags. Synopsisgtags-parser [-bdenqrstvw] file … DescriptionGtags-parser print cross reference list for gtags(1) from the specified C, C++, yacc, java, PHP and Assembly source to standard output. Each line of output contains the object name, the line number which it appears, the file in which it is defined, and…
gtags-cscope – pseudo cscope which implements the line-oriented interface Synopsisgtags-cscope [-Cqv] DescriptionGtags-cscope is a pseudo cscope which implements the line-oriented interface. You can use this command for various clients instead of true cscope. Since gtags-cscope is intended to make GLOBAL available through cscope interface, the output is not necessarily the same as cscope. OptionsThe following…
gt5 – a diff-capable ‘du-browser’ Synopsisgt5 [ dir | file | dir file | file file2 ] [options] Descriptiongt5 reads the output of du, compares it with a du-log saved by the last run, converts it into HTML and opens the resulting file with a textbrowser. If files are given on the commandline they are…
gt – version of TiMidity MIDI to WAVE converter and player Synopsisgt [-options] [directoryname | filenames …] [-options] DescriptionGt is a MIDI to WAVE converter using Gravis Ultrasound-compatible patch files, extended GUS patch files, or AWE-compatible SoundFonts to generate digital audio data from General MIDI files. The data can be stored in a file for processing,…