Author: Linux Manual

akmods – manual page for akmods 0.4.0 Synopsisakmods [OPTIONS] DescriptionChecks the akmod packages and rebuilds them if needed Available options: –force — try all, even if they failed earlier –kernels <kernel> — build and install only for kernel <kernel> –akmod <akmod> — build and install only akmod <akmod>Bugshttps://bugzilla.rpmfusion.org/buglist.cgi?product=Fedora&component=akmods&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED AuthorThorsten Leemhuis <fedora [AT] leemhuis [DOT] info>…

airtun-ng – a virtual tunnel interface creator for aircrack-ng Synopsisairtun-ng [options] <interface name> Descriptionairtun-ng creates a virtual tunnel interface (atX) for sending arbitrary IP packets by using raw ieee802.11 packet injection. Options-H, –help Shows the help screen. -x <pps> Sets maximum number of packets per second. -a <BSSID> Specifies the BSSID for the iee802.11 header….

airtsp – Binary executable for the C++ Simulated Airline Schedule Manager LibrarySynopsisairtsp [–prefix] [-v|–version] [-h|–help] [-b|–builtin] [-i|–input <path-to-input>] [-l|–log <path-to-output-log-file>] Descriptionairtsp is a small program showing how to use the AirTSP library. airtsp accepts the following options: –prefix  Show the AirTSP installation prefix. -v, –version  Print the currently installed version of AirTSP on the standard…

airtsp-config – Configuration Script for the C++ Simulated Airline Schedule Manager LibrarySynopsisairtsp-config [–prefix] [–version] [–libs] [–cflags] Descriptionairtsp-config is a tool that is used by configure to determine the compiler and linker flags that should be used to compile and link programs that use AirTSP. It is also used internally by the .m4 macros, that are…

airsnort – WEP key cracking tool SynopsisDescriptionairsnort is a WEP key cracking tool designed to exploit the RC4 scheduling weakness discussed by Fluhrer, Mantin, and Shamir (FMS) and first exploited by Stubblefield et al. – Running AirSnort Once launched, airsnort must be configured to work with your wireless nic and to make crack attempts according…

airserv-ng – a wireless card server Synopsisairserv-ng <options> Descriptionairserv-ng is a wireless card server which allows multiple wireless application programs to independently use a wireless card via a client-server TCP network connection. All operating system and wireless card driver specific code is incorporated into the server. This eliminates the need for each wireless application to…

airscan-discover – Discover sane-airscan compatible scanners Synopsisairscan-discover [-h] [-d] [-t] Descriptionairscan-discover is a command-line tool to find eSCL and WSD scanners on a local network It uses Avahi to discover DNS-SD devices and its own implementation of WS-Discovery to discover WSD devices. On success, it outputs a fragment of sane-airscan configuration file, that can be…

airrac – Command-line utility for the C++ Simulated Revenue Accounting (RAC) System LibrarySynopsisairrac [–prefix] [-v|–version] [-h|–help] [-b|–builtin] [-i|–input <path-to-input>] [-l|–log <path-to-output-log-file>] Descriptionairrac is a small program showing how to use the AirRAC library. airrac accepts the following options: –prefix  Show the AirRAC installation prefix. -v, –version  Print the currently installed version of AirRAC on the…

airrac-config – Configuration Script for the C++ Simulated Revenue Accounting (RAC) System LibrarySynopsisairrac-config [–prefix] [–version] [–libs] [–cflags] Descriptionairrac-config is a tool that is used by configure to determine the compiler and linker flags that should be used to compile and link programs that use AirRAC. It is also used internally by the .m4 macros, that…

airolib-ng – manage and create a WPA/WPA2 pre-computed hashes tables Synopsisairolib-ng <database> <operation> [options] Descriptionairolib-ng is a tool for the aircrack-ng suite to store and manage essid and password lists, compute their Pairwise Master Keys (PMKs) and use them in WPA/WPA2 cracking. The program uses the lightweight SQLite3 database as the storage mechanism which is…

airodump-ng – a wireless packet capture tool for aircrack-ng Synopsisairodump-ng [options] <interface name> Descriptionairodump-ng is used for packet capturing of raw 802.11 frames for the intent of using them with aircrack-ng. If you have a GPS receiver connected to the computer, airodump-ng is capable of logging the coordinates of the found access points. Additionally, airodump-ng…

airmon-ng – bash script designed to turn wireless cards into monitor mode. Synopsisairmon-ng <start|stop> <interface> [channel] airmon-ng <check> [kill] Descriptionairmon-ng is script can be used to enable monitor mode on wireless interfaces. It may also be used to go back from monitor mode to managed mode. Entering the airmon-ng command without parameters will show the…

airmass – Computing airmass coefficient Synopsisairmass [options] source_file … – batch mode airmass [options] – terminal mode DescriptionThe Airmass program computes value of the airmass coefficient (X) from given julian date, object’s coordinates and observer’s coordinates. It works either in batch mode, where the table stored in file is converted and saved to another file,…

aireplay-ng – inject packets into a wireless network to generate traffic Synopsisaireplay-ng [options] <replay interface> Descriptionaireplay-ng is used to inject/replay frames. The primary function is to generate traffic for the later use in aircrack-ng for cracking the WEP and WPA-PSK keys. There are different attacks which can cause deauthentications for the purpose of capturing WPA…

airdriver-ng – automatically install/uninstall and patch drivers and 802.11 stacks Synopsisairdriver-ng <command> [drivernumber] Descriptionairdriver-ng is a script that provides status information about the wireless drivers on your system plus the ability to load and unload the drivers. Additionally, airdriver-ng allows you to install and uninstall drivers complete with the patches required for monitor and injection…

airuncloak-ng – Removes wep cloaked framed from a pcap file. Synopsisairuncloak-ng <options> Descriptionairuncloak-ng is a tool that removes wep cloaking from a pcap file. Some WIPS (actually one) can actively "prevent" cracking a WEP key by inserting chaff (fake wep frames) in the air to fool aircrack-ng. In some rare cases, cloaking fails and the…

airdecap-ng – decrypt a WEP/WPA crypted pcap file Synopsisairdecap-ng [options] <pcap file> Descriptionairdecap-ng decrypts a WEP/WPA crypted pcap file to a uncrypted one by using the right WEP/WPA keys. Options-H, –help Shows the help screen. -l Do not remove the 802.11 header. -b <bssid> Access point MAC address filter. -k <pmk> WPA Pairwise Master Key…

aircrack-ng – a 802.11 WEP / WPA-PSK key cracker Synopsisaircrack-ng [options] <.cap / .ivs file(s)> Descriptionaircrack-ng is an 802.11 WEP and WPA/WPA2-PSK key cracking program. It can recover the WEP key once enough encrypted packets have been captured with airodump-ng. This part of the aircrack-ng suite determines the WEP key using two fundamental methods. The…

airbase-ng – multi-purpose tool aimed at attacking clients as opposed to the Access Point (AP) itself Synopsisairbase-ng [options] <interface name> Descriptionairbase-ng is multi-purpose tool aimed at attacking clients as opposed to the Access Point (AP) itself. Since it is so versatile and flexible, summarizing it is a challenge. Here are some of the feature highlights:…

aide – Advanced Intrusion Detection Environment Synopsisaide [parameters] command Descriptionaide is an intrusion detection system for checking the integrity of files. Commands–check, -C Checks the database for inconsistencies. You must have an initialized database to do this. This is also the default command. Without any command aide does a check. –init, -i Initialize the database….