airrac-config – Configuration Script for the C++ Simulated Revenue Accounting (RAC) System LibrarySynopsisairrac-config [–prefix] [–version] [–libs] [–cflags] Descriptionairrac-config is a tool that is used by configure to determine the compiler and linker flags that should be used to compile and link programs that use AirRAC. It is also used internally by the .m4 macros, that…
airolib-ng – manage and create a WPA/WPA2 pre-computed hashes tables Synopsisairolib-ng <database> <operation> [options] Descriptionairolib-ng is a tool for the aircrack-ng suite to store and manage essid and password lists, compute their Pairwise Master Keys (PMKs) and use them in WPA/WPA2 cracking. The program uses the lightweight SQLite3 database as the storage mechanism which is…
airodump-ng – a wireless packet capture tool for aircrack-ng Synopsisairodump-ng [options] <interface name> Descriptionairodump-ng is used for packet capturing of raw 802.11 frames for the intent of using them with aircrack-ng. If you have a GPS receiver connected to the computer, airodump-ng is capable of logging the coordinates of the found access points. Additionally, airodump-ng…
airmon-ng – bash script designed to turn wireless cards into monitor mode. Synopsisairmon-ng <start|stop> <interface> [channel] airmon-ng <check> [kill] Descriptionairmon-ng is script can be used to enable monitor mode on wireless interfaces. It may also be used to go back from monitor mode to managed mode. Entering the airmon-ng command without parameters will show the…
airmass – Computing airmass coefficient Synopsisairmass [options] source_file … – batch mode airmass [options] – terminal mode DescriptionThe Airmass program computes value of the airmass coefficient (X) from given julian date, object’s coordinates and observer’s coordinates. It works either in batch mode, where the table stored in file is converted and saved to another file,…
aireplay-ng – inject packets into a wireless network to generate traffic Synopsisaireplay-ng [options] <replay interface> Descriptionaireplay-ng is used to inject/replay frames. The primary function is to generate traffic for the later use in aircrack-ng for cracking the WEP and WPA-PSK keys. There are different attacks which can cause deauthentications for the purpose of capturing WPA…
airdriver-ng – automatically install/uninstall and patch drivers and 802.11 stacks Synopsisairdriver-ng <command> [drivernumber] Descriptionairdriver-ng is a script that provides status information about the wireless drivers on your system plus the ability to load and unload the drivers. Additionally, airdriver-ng allows you to install and uninstall drivers complete with the patches required for monitor and injection…
airuncloak-ng – Removes wep cloaked framed from a pcap file. Synopsisairuncloak-ng <options> Descriptionairuncloak-ng is a tool that removes wep cloaking from a pcap file. Some WIPS (actually one) can actively "prevent" cracking a WEP key by inserting chaff (fake wep frames) in the air to fool aircrack-ng. In some rare cases, cloaking fails and the…
airdecap-ng – decrypt a WEP/WPA crypted pcap file Synopsisairdecap-ng [options] <pcap file> Descriptionairdecap-ng decrypts a WEP/WPA crypted pcap file to a uncrypted one by using the right WEP/WPA keys. Options-H, –help Shows the help screen. -l Do not remove the 802.11 header. -b <bssid> Access point MAC address filter. -k <pmk> WPA Pairwise Master Key…
aircrack-ng – a 802.11 WEP / WPA-PSK key cracker Synopsisaircrack-ng [options] <.cap / .ivs file(s)> Descriptionaircrack-ng is an 802.11 WEP and WPA/WPA2-PSK key cracking program. It can recover the WEP key once enough encrypted packets have been captured with airodump-ng. This part of the aircrack-ng suite determines the WEP key using two fundamental methods. The…
airbase-ng – multi-purpose tool aimed at attacking clients as opposed to the Access Point (AP) itself Synopsisairbase-ng [options] <interface name> Descriptionairbase-ng is multi-purpose tool aimed at attacking clients as opposed to the Access Point (AP) itself. Since it is so versatile and flexible, summarizing it is a challenge. Here are some of the feature highlights:…
aide – Advanced Intrusion Detection Environment Synopsisaide [parameters] command Descriptionaide is an intrusion detection system for checking the integrity of files. Commands–check, -C Checks the database for inconsistencies. You must have an initialized database to do this. This is also the default command. Without any command aide does a check. –init, -i Initialize the database….
agrep – print lines approximately matching a pattern Synopsisagrep [OPTION]… PATTERN [FILE]… DescriptionSearches for approximate matches of PATTERN in each FILE or standard input. Example: `agrep -2 optimize foo.txt’ outputs all lines in file `foo.txt’ that match "optimize" within two errors. E.g. lines which contain "optimise", "optmise", and "opitmize" all match. OptionsRegexp selection and interpretation:-e…
rancid – Cisco configuration filter Synopsisrancid [-dlCV] [-t device_type] (-f filename | hostname) rancid [-dhlCV] -t device_type (-f filename | hostname) Descriptionrancid is a collection of perl(1) scripts which uses the login scripts (see clogin(1)) to login to a device, execute commands to display the configuration, etc, then filters the output for formatting, security, and…
aggregate – optimise a list of route prefixes to help make nice short filters Synopsisaggregate [-m max-length] [-o max-opt-length] [-p default-length] [-q] [-t] [-v] DescriptionTakes a list of prefixes in conventional format on stdin, and performs two optimisations to attempt to reduce the length of the prefix list. The first optimisation is to remove any…
aggregate-ios – optimise a concatenated set of cisco/IOS prefix filters to help make them nice and short. Synopsisaggregate-ios <source_config >optimised_config DescriptionTakes cisco IOS configuration on stdin, and optimises any prefix filters found using aggregate(1). Optimised filters are produced on stdout. OptionsNone. DiagnosticsAny diagnostics produced by aggregate(1) are passed through on stderr. ExamplesThe following configuration fragment:…
agentxtrap – send an AgentX NotifyPDU to an AgentX master agent Synopsisagentxtrap [OPTIONS] trap-oid [OID TYPE VALUE…] Descriptionagentxtrap issues an AgentX NotifyPDU to a master agent. One or more object identifiers (OIDs) can be given as arguments on the command line. A type and a value must accompany each object identifier. Each variable name is…
agedu – correlate disk usage with last-access times to identify large and disused data Synopsisagedu [ options ] action [action…]Descriptionagedu scans a directory tree and produces reports about how much disk space is used in each directory and subdirectory, and also how that usage of disk space corresponds to files with last-access times a long time ago. In other words,…
afslog – obtain AFS tokens Synopsis[-h | –help ] [–no-v4 ] [–no-v5 ] [-u | –unlog ] [-v | –verbose ] [–version ] [-c cell | –-cell= cell ] [-k realm | –-realm= realm ] [-P principal | –-principal= principal ] -words [-p path | –-file= path ] [cell | path … ] Descriptionobtains AFS…
afs5log – AFS token initializer Synopsisafs5log [ [-v] [-5] [-k] [-p path] [cell[=principal] ] ] […] DescriptionThe afs5log command uses Kerberos to obtain AFS tokens for the named cells. If no cell is named, tokens are obtained for the local cell. If the principal name of the afs service for the cell is known, the…