CURLOPT_PREQUOTE – commands to run before FTP or SFTP transfer Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_PREQUOTE, char *cmds); DescriptionPass a pointer to a linked list of FTP or SFTP commands to pass to the server after the transfer type is set. The linked list should be a fully valid list of struct curl_slist structs properly…
CURLOPT_POSTREDIR – how to act on a HTTP POST redirect Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_POSTREDIR, long bitmask);DescriptionPass a bitmask to control how libcurl acts on redirects after POSTs that get a 301, 302 or 303 response back. A parameter with bit 0 set (value CURL_REDIR_POST_301) tells the library to respect RFC2616/10.3.2 and not convert…
CURLOPT_POSTQUOTE – (S)FTP commands to run after the transfer Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_POSTQUOTE, struct curl_slist *cmds); DescriptionPass a pointer to a linked list of FTP or SFTP commands to pass to the server after your FTP transfer request. The commands will only be run if no error occurred. The linked list should be…
CURLOPT_POSTFIELDSIZE_LARGE – size of POST data pointed to Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_POSTFIELDSIZE_LARGE, curl_off_t size);DescriptionIf you want to post data to the server without having libcurl do a strlen() to measure the data size, this option must be used. When this option is used you can post fully binary data, which otherwise is likely…
CURLOPT_POSTFIELDSIZE – size of POST data pointed to Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_POSTFIELDSIZE, long size); DescriptionIf you want to post data to the server without having libcurl do a strlen() to measure the data size, this option must be used. When this option is used you can post fully binary data, which otherwise is…
CURLOPT_POSTFIELDS – specify data to POST to server Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_POSTFIELDS, char *postdata); DescriptionPass a char * as parameter, pointing to the full data to send in a HTTP POST operation. You must make sure that the data is formatted the way you want the server to receive it. libcurl will not…
CURLOPT_POST – request a HTTP POST Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_POST, long post); DescriptionA parameter set to 1 tells libcurl to do a regular HTTP post. This will also make the library use a "Content-Type: application/x-www-form-urlencoded" header. (This is by far the most commonly used POST method). Use one of CURLOPT_POSTFIELDS(3) or CURLOPT_COPYPOSTFIELDS(3) options…
CURLOPT_PORT – set remote port number to work with Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_PORT, long number); DescriptionThis option sets number to be the remote port number to connect to, instead of the one specified in the URL or the default port for the used protocol. Usually, you just let the URL decide which port…
CURLOPT_PINNEDPUBLICKEY – set pinned public key Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_PINNEDPUBLICKEY, char *pinnedpubkey); DescriptionPass a pointer to a zero terminated string as parameter. The string should be the file name of your pinned public key. The format expected is "PEM" or "DER". When negotiating a TLS or SSL connection, the server sends a certificate…
CURLOPT_PASSWORD – password to use in authentication Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_PASSWORD, char *pwd); DescriptionPass a char * as parameter, which should be pointing to the zero terminated password to use for the transfer. The CURLOPT_PASSWORD(3) option should be used in conjunction with the CURLOPT_USERNAME(3) option. Defaultblank ProtocolsMost ExampleTODO AvailabilityAdded in 7.19.1 Return ValueReturns…
CURLOPT_OPENSOCKETFUNCTION – set callback for opening sockets Synopsis#include <curl/curl.h> typedef enum { CURLSOCKTYPE_IPCXN, /* socket created for a specific IP connection */ CURLSOCKTYPE_ACCEPT, /* socket created by accept() call */ CURLSOCKTYPE_LAST /* never use */ } curlsocktype; struct curl_sockaddr { int family; int socktype; int protocol; unsigned int addrlen; struct sockaddr addr; }; curl_socket_t opensocket_callback(void…
CURLOPT_OPENSOCKETDATA – custom pointer passed to open socket callback Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_OPENSOCKETDATA, void *pointer); DescriptionPass a pointer that will be untouched by libcurl and passed as the first argument in the opensocket callback set with CURLOPT_OPENSOCKETFUNCTION(3). DefaultThe default value of this parameter is NULL. ProtocolsAll ExampleTODO AvailabilityAdded in 7.17.1 Return ValueReturns CURLE_OK…
CURLOPT_NOSIGNAL – skip all signal handling Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_NOSIGNAL, long onoff); DescriptionIf onoff is 1, libcurl will not use any functions that install signal handlers or any functions that cause signals to be sent to the process. This option is here to allow multi-threaded unix applications to still set/use all timeout options…
CURLOPT_NOPROXY – disable proxy use for specific hosts Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_NOPROXY, char *noproxy); DescriptionPass a pointer to a zero terminated string. The string consists of a comma separated list of host names that do not require a proxy to get reached, even if one is specified. The only wildcard available is a…
CURLOPT_NOPROGRESS – switch off the progress meter Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_NOPROGRESS, long onoff); DescriptionIf onoff is to 1, it tells the library to shut off the progress meter completely for requests done with this handle. It will also prevent the CURLOPT_PROGRESSFUNCTION(3) from getting called. Future versions of libcurl are likely to not have…
CURLOPT_NOBODY – do the download request without getting the body Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_NOBODY, long opt); DescriptionA long parameter set to 1 tells libcurl to not include the body-part in the output when doing what would otherwise be a download. For HTTP(S), this makes libcurl do a HEAD request. For most other protocols…
CURLOPT_NEW_FILE_PERMS – permissions for remotely created files Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_NEW_FILE_PERMS, long mode);DescriptionPass a long as a parameter, containing the value of the permissions that will be assigned to newly created files on the remote server. The default value is 0644, but any valid value can be used. The only protocols that can…
CURLOPT_NEW_DIRECTORY_PERMS – permissions for remotely created directories Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_NEW_DIRECTORY_PERMS, long mode);DescriptionPass a long as a parameter, containing the value of the permissions that will be assigned to newly created directories on the remote server. The default value is 0755, but any valid value can be used. The only protocols that can…
CURLOPT_NETRC_FILE – file name to read .netrc info from Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_NETRC_FILE, char *file); DescriptionPass a char * as parameter, pointing to a zero terminated string containing the full path name to the file you want libcurl to use as .netrc file. If this option is omitted, and CURLOPT_NETRC(3) is set, libcurl…
CURLOPT_NETRC – request that .netrc is used Synopsis#include <curl/curl.h> CURLcode curl_easy_setopt(CURL *handle, CURLOPT_NETRC, long level); DescriptionThis parameter controls the preference level of libcurl between using user names and passwords from your ~/.netrc file, relative to user names and passwords in the URL supplied with CURLOPT_URL(3). libcurl uses a user name (and supplied or prompted password)…