dcmdjpeg – Decode JPEG-compressed DICOM file Synopsisdcmdjpeg [options] dcmfile-in dcmfile-outDescriptionThe dcmdjpeg utility reads a JPEG-compressed DICOM image (dcmfile-in), decompresses the JPEG data (i. e. conversion to a native DICOM transfer syntax) and writes the converted image to an output file (dcmfile-out). Parametersdcmfile-in DICOM input filename to be converted dcmfile-out DICOM output filenameOptionsgeneral options -h –help…
dcmcrle – Encode DICOM file to RLE transfer syntax Synopsisdcmcrle [options] dcmfile-in dcmfile-outDescriptionThe dcmcrle utility reads an uncompressed DICOM image (dcmfile-in), performs RLE compression (i.e. conversion to an encapsulated DICOM transfer syntax) and writes the converted image to an output file (dcmfile-out). Parametersdcmfile-in DICOM input filename to be converted dcmfile-out DICOM output filenameOptionsgeneral options -h…
dcmconv – Convert DICOM file encoding Synopsisdcmconv [options] dcmfile-in dcmfile-outDescriptionThe dcmconv utility reads a DICOM file (dcmfile-in), performs an encoding conversion and writes the converted data to an output file (dcmfile-out). Parametersdcmfile-in DICOM input filename to be converted dcmfile-out DICOM output filename to write toOptionsgeneral options -h –help print this help text and exit –version…
dcmcjpls – Encode DICOM file to JPEG-LS transfer syntax Synopsisdcmcjpls [options] dcmfile-in dcmfile-outDescriptionThe dcmcjpls utility reads an uncompressed DICOM image (dcmfile-in), performs a JPEG-LS compression (i. e. conversion to an encapsulated DICOM transfer syntax) and writes the converted image to an output file (dcmfile-out). Parametersdcmfile-in DICOM input filename to be converted dcmfile-out DICOM output filenameOptionsgeneral…
dcmcjpeg – Encode DICOM file to JPEG transfer syntax Synopsisdcmcjpeg [options] dcmfile-in dcmfile-outDescriptionThe dcmcjpeg utility reads an uncompressed DICOM image (dcmfile-in), performs a JPEG compression (i. e. conversion to an encapsulated DICOM transfer syntax) and writes the converted image to an output file (dcmfile-out). Parametersdcmfile-in DICOM input filename to be converted dcmfile-out DICOM output filenameOptionsgeneral…
dcm2xml – Convert DICOM file and data set to XML Synopsisdcm2xml [options] dcmfile-in [xmlfile-out]DescriptionThe dcm2xml utility converts the contents of a DICOM file (file format or raw data set) to XML (Extensible Markup Language). The DTD (Document Type Definition) is described in the file dcm2xml.dtd. If dcm2xml reads a raw data set (DICOM data without…
dcm2pnm – Convert DICOM images to PGM/PPM, PNG, TIFF or BMP Synopsisdcm2pnm [options] dcmfile-in [bitmap-out]DescriptionThe dcm2pnm utility reads a DICOM image, converts the pixel data according to the selected image processing options and writes back an image in the well-known PGM/PPM (portable gray map / portable pix map), PNG, TIFF or Windows BMP format. This…
dcm2pdf – Extract PDF file from DICOM encapsulated PDF Synopsisdcm2pdf [options] dcmfile-in pdffile-outDescriptionThe dcm2pdf utility reads a DICOM file of the Encapsulated PDF Storage SOP Class (dcmfile-in), extracts the embedded PDF document and writes it to an output file (pdffile-out). Optionally a command can be executed after the creation of the PDF file. Parametersdcmfile-in DICOM…
dcl2inc – postprocess ftnchek .dcl files to create separate INCLUDE files Synopsisdcl2inc *.dcl Descriptiondcl2inc postprocessing declaration files output by ftnchek(1), replacing unique COMMON block definitions by Fortran INCLUDE statements. For each input .dcl file, a modified output .dcn file is produced, together with include files named by the COMMON block name, with filename extension .inc….
dchroot – enter a chroot environment Synopsisdchroot [-h|–help | -V|–version | -l|–list | -i|–info | –config | –location] [–directory=directory] [-d|–preserve-environment] [-q|–quiet | -v|–verbose] [-c chroot|–chroot=chroot | –all] [COMMAND [ ARG1 [ ARG2 [ ARGn]]]] Descriptiondchroot allows the user to run a command or a login shell in a chroot environment. If no command is specified,…
dcfldd – manual page for dcfldd (dcfldd) 1.3.4 Synopsisdcfldd [OPTION]… DescriptionCopy a file, converting and formatting according to the options. bs=BYTES force ibs=BYTES and obs=BYTES cbs=BYTES convert BYTES bytes at a time conv=KEYWORDS convert the file as per the comma separated keyword list count=BLOCKS copy only BLOCKS input blocks ibs=BYTES read BYTES bytes at a…
dccp – Copy a file from or to a dCache server. Synopsisdccp [option…] <sourceUrl> <destUrl> ArgumentsThe following arguments are required: sourceUrl The URL of the source file. destUrl The URL of the destination file.DescriptionThe dccp utility provides a cp(1) like functionality on the dCache file system. The source must be a single file while the…
dc_test – Distributed session cache testing and benchmarking tool Synopsisdc_test -connect <addr> [options] Descriptiondc_test runs a configurable number of session caching operations against a given network address using the distcache(8) protocol. This is typically to verify an installation, to help diagnose problems, and to measure latency and/or throughput. The given address could be for an…
dc_snoop – Distributed session cache traffic analysis Synopsisdc_snoop -listen <address> -server <address> [options] Descriptiondc_snoop runs as a transparent proxy supporting the distcache(8) protocol and (in theory) should work when inserted between any compliant tools. Ie. this can be used to monitor cache operation requests and responses between applications and dc_client, or between dc_client and dc_server….
dc_server – Distributed session cache server Synopsisdc_server -listen <address> [options] Descriptiondc_server runs a cache server and starts listening on a configurable network address for connections. Incoming connections are expected to communicate using the distcache(8) protocol, and would typically be instances of dc_client(1) running on other machines. Options-daemon After initialising, dc_server will detach from the parent…
dc_client – Distributed session cache client proxy Synopsisdc_client -server <address> [options] Descriptiondc_client runs a client proxy to provide access to a remote cache server (typically over TCP/IPv4) by providing a local service (typically over unix domain sockets). It starts listening on a configurable network address for connections and establishes a persistent connection to an instance…
dc3dd – convert and copy a file DescriptionAuthorWritten by Paul Rubin, David MacKenzie, Stuart Kemp, Jesse Kornblum, Andrew Medico, and Richard Cordovano. Reporting BugsReport bugs to <dc3dd [at] dc3.mil>. CopyrightCopyright © 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and…
dc1394_vloopback – send format0 video to V4L vloopback device Synopsisdc1394_vloopback [–daemon] [–pipe] [–guid=camera-euid] [–video1394=/dev/video1394/x] [–vloopback=/dev/video0] [–palette=yuv422|rgb24] [–width=n] [–height=n] DescriptionSends format0 640×480 RGB to the vloopback input device so that it can be consumed by V4L applications on the vloopback output device. Options–daemon run as a daemon, detached from console (optional). –pipe write images to vloopback…
dc1394_reset_bus – resets the IEEE1394 bus Synopsisdc1394_reset_bus DescriptionFinds the 1394 bus of the first camera found and resets it OptionsThere are no command-line options for this program. BugsThis program is maintained by the DC1394 Package Mainteners’ team <libdc1394-packaging [at] lists.sourceforge.net>. The bugs related to libdc1394 and current packaging can be submitted here: http://bugs.launchpad.net/~libdc1394-dev/ For bugs…
dc1394_multiview – display format0 camera video Synopsisdc1394_multiview [–fps=[1,3,15,30]] [–res=[0,1,2]] [–device=/dev/video1394/x] DescriptionView format0-only camera video from one or more cameras. Options–fps frames per second. default is 7. The 30 fps setting is incompatible with the 640×480 RGB8 resolution setting. –res resolution. 0 is 320×240 (default), 1 = 640×480 YUV4:1:1, 2 = 640×480 RGB8 –device specifies video1394…