b43-fwcutter – Utility for extracting Broadcom 43xx firmware Synopsisb43-fwcutter [OPTION] [DRIVER] Descriptionb43-fwcutter can extract the firmware for your Broadcom 43xx hardware from different closed source drivers. The b43 driver depends on these firmware files and can’t work without them. Currently b43-fwcutter supports Apple MacOS X, Microsoft Windows and Linux drivers, but keep in mind that…
b2sum – compute and check BLAKE2 message digest Synopsisb2sum [,OPTION/]… [,FILE/]… DescriptionPrint or check BLAKE2 (512-bit) checksums. With no FILE, or when FILE is -, read standard input. -b, –binary read in binary mode -c, –check read BLAKE2 sums from the FILEs and check them -l, –length digest length in bits; must not exceed the…
b2m – convert old Emacs Rmail Babyl format to mbox format Synopsisb2m < babyl-file > mbox-file Descriptionb2m accepts Babyl format mail (as used by older versions of Rmail in GNU Emacs) on standard input, and converts it to mbox format on standard output. Babyl was the storage format used by Rmail prior to Emacs 23.1….
Boost.Build – software build tool DescriptionBoost.Build 4.0-git Project-specific help: Project has jamfile at Jamroot Usage: b2 [options] [properties] [install|stage] Builds and installs Boost. Targets and Related Options: install Install headers and compiled library files to the ======= configured locations (below). –prefix=<PREFIX> Install architecture independent files here. Default: C:\Boost on Windows Default: ,/usr/local/ on Unix, Linux,…
Ayttm – Universal Instant Messaging client Synopsisayttm [options]… DescriptionAyttm is an instant messaging (aka chat) client that provides all-in-one chat functionality for several major instant messaging services from one simple program. Ayttm "Contacts" allow you to refer to several accounts of the same person from a single contact name, making it one of the cleanest…
axohelp – helper program for use of LaTeX package axodraw2 with pdflatex. Synopsisaxohelp [options] [filename] DescriptionAxohelp is a program used with the axodraw2, which is a LaTeX package for drawing Feynman graphs (and some other simple graphics) in LaTeX documents. When the axodraw2 package is used with pdflatex (or lualatex or xelatex) it creates a…
axlisten – monitor AX.25 traffic Synopsisaxlisten [-8] [-a] [-c] [-h] [-i] [-p port] [-r] [-t] [-v] DescriptionAxlisten uses SOCK_PACKET facilities to provide a network monitor of all AX.25 traffic heard by the system. Since KISS is implicitly promiscuous no special driver configurations are needed. This version displays standard AX.25, PE1CHL extended AX.25, NET/ROM, Rose, ARP,…
axi-cache – query the Apt Xapian Index Synopsisaxi-cache [options] command [args] DescriptionQuery the Apt Xapian index. Commands:search commands: axi-cache again [query] repeat the last search, possibly adding query terms axi-cache help show a summary of commands axi-cache info print information about the apt-xapian-index environment axi-cache last [count] show the last results again axi-cache more [count]…
axgetput – upload or download files via AX.25 / axspawn Linux login session. Synopsisaxgetput [-b blocksize] [-i] [-v] [-h] [?] filename axgetput [-b blocksize] [-i] -s [-v] [-h] [?] [filename] Description-b blocksize Set the blocksize (frame length) of transmitted data. Defaults to 256 bytes which matches typical AX.25 network confurations best. -i Compute CRC checksum…
Synopsisaxfr-get [OPTIONS] <DOMAIN-NAME> <OUTFILE> <OUTFILE.TMP> Descriptionaxfr-get is a DNS zone transfer client. It sends a zone transfer request in DNS-over-TCP format to descriptor 7, reads the result from descriptor 6 and saves the result in a file. axfr-get performs the zone transfer for the given domain, and writes the result to file – OUTFILE.TMP in…
axfer – command-line sound recorder and player for sound devices and nodes supported by Linux sound subsystem (Advanced Linux Sound Architecture, also known as ALSA). Synopsysaxfer subcommand direction options subcommand = transfer | list | version | help direction = capture | playback options = ( depends on subcommand ) DescriptionThe axfer is a command-line…
axfer-transfer – transferrer of audio data frame for sound devices and nodes. Synopsisaxfer transfer direction [ common-options ] [ backend-options ] [ filepath ] axfer transfer direction [ common-options ] [ backend-options ] -I | –separate-channels filepath … direction = capture | playback common-options = ( read OPTIONS section ) backend-options = ( read OPTIONS…
axfer-list – dump lists of available sound devices and nodes to transfer audio data frame. Synopsisaxfer list direction target direction = capture | playback target = device | pcm DescriptionThe list subcommand of axfer dumps lists of available nodes to transfer audio data frame. At present, the subcommand is helpful just for libasound backend of…
Axel – A light download accelerator for Linux. Synopsisaxel [OPTIONS] url1 [url2] [url…] DescriptionAxel is a program that downloads a file from a FTP or HTTP server through multiple connection, each connection downloads its own part of the file. Unlike most other programs, Axel downloads all the data directly to the destination file, using one…
axcall – make an AX.25, NET/ROM or Rose connection. SynopsisFor AX.25 axcall [-b l|e] [-d] [-h] [-m s|e] [-p paclen] [-r] [-t] [-v] [-w window] port callsign [[via] digipeaters…..] For NET/ROM axcall [-d] [-h] [-p paclen] [-r] [-t] [-v] port callsign For Rose axcall [-d] [-h] [-r] [-t] [-v] port callsign address [[via] digipeater] DescriptionAxcall…
avstopam – convert an AVS X image to a Netpbm image Synopsisavstopam [avsfile] DescriptionThis program is part of Netpbm(1) avstopam reads a Stardent <acronym xml:lang="en" title="Application Visualization System">AVS</acronym> X image as input and produces a Netpbm image as output. avsfile is the input file, which defaults to Standard Input. Output is always on Standard Output….
avrdude – driver program for “simple” Atmel AVR MCU programmer Synopsis–p partno [-b baudrate ] [-B bitclock ] [-c programmer-id ] [-C config-file ] [-D ] [-e ] [-E exitspec [, exitspec ] ] [-F ] [-i delay ] [-n ] [-O ] [-P port ] [-q ] [-s ] [-t ] [-u ] [-U…
windmc – generates Windows message resources. Synopsiswindmc [options] input-file Descriptionwindmc reads message definitions from an input file (.mc) and translate them into a set of output files. The output files may be of four kinds: "h" A C header file containing the message definitions. "rc" A resource file compilable by the windres tool. "bin" One…
strip – Discard symbols from object files. Synopsisstrip [-F bfdname |–target=bfdname] [-I bfdname |–input-target=bfdname] [-O bfdname |–output-target=bfdname] [-s|–strip-all] [-S|-g|-d|–strip-debug] [–strip-dwo] [-K symbolname |–keep-symbol=symbolname] [-N symbolname |–strip-symbol=symbolname] [-w|–wildcard] [-x|–discard-all] [-X |–discard-locals] [-R sectionname |–remove-section=sectionname] [-o file] [-p|–preserve-dates] [-D|–enable-deterministic-archives] [-U|–disable-deterministic-archives] [–keep-file-symbols] [–only-keep-debug] [-v |–verbose] [-V|–version] [–help] [–info] objfile… DescriptionGNU strip discards all symbols from object files objfile. The list of object files may include archives. At least one object file must be given. strip…
strings – print the strings of printable characters in files. Synopsisstrings [-afovV] [–min-len] [-n min-len] [–bytes=min-len] [-t radix] [–radix=radix] [-e encoding] [–encoding=encoding] [–] [–all] [–print-file-name] [-T bfdname] [–target=bfdname] [–help] [–version] file… DescriptionFor each file given, GNU strings prints the printable character sequences that are at least 4 characters long (or the number given with the options below) and are followed by an unprintable character. By default, it…