esparse – ECMAScript Parser using Esprima DescriptionUsage:esparse [options] file.js Available options: –comment Gather all line and block comments in an array –loc Include line-column location info for each syntax node –range Include index-based range for each syntax node –raw Display the raw value of literals –tokens List all tokens in an array –tolerant Tolerate errors…
esmtp – libESMTP to Sendmail compatibility interface Synopsisesmtp [flags] [address …] sendmail [flags] [address …] mailq sendmail -bp newaliases sendmail -bi DescriptionEsmtp is a send-only sendmail emulator for machines which normally retrieve their mail from a centralized mailhub using programs such as fetchmail. Esmtp does not attempt to provide all the functionality of sendmail: it…
esdsample – play a sample Synopsisesdsample [-s hostname:port] [-b] [-d] [-e] [-h] [-m] [-r freq] samplename DescriptionThe esdsample utility plays a sample using the Enlighted Sound Daemon (esd). OptionsThe following options are supported: -s hostname:port Contact the esd server on hostname at port. -b Specify that the output should be in 8-bit format. By default,…
esdrec – record a sound file Synopsisesdrec [-s hostname:port] [-b] [-h] [-m] [-r freq] DescriptionThe esdrec application pipes data from the sound device to stdout using the Enlightened Sound Daemon (esd). OptionsThe following options are supported: -s hostname:port Contact the esd server on hostname at port. -b Specify that the output should be in 8-bit…
esddsp – attempt to reroute audio device to esd DescriptionPlays the FILE on EsounD. Usageesdplay [OPTIONS] FILE Options: "-s", –server=HOSTNAME set EsounD server "-h", –help display this help and exit "-v", –version output version information and exit See Alsoesd(1), esdcat(1), esddsp(1), esdloop(1), esdsample(1), esd-config(1), esdctl(1), esdfilt(1), esdmon(1), esdrec(1)
esdmon – The Enlightened Sound Daemon DescriptionEsounD monitor. Opens the esd socket and duplicates the stream being sent to the sound device. Usageesdmon [OPTIONS] [FILE] Options: "-s", –server=HOSTNAME set EsounD server "-b", output file should be 8-bit "-m", output file should be mono "-r" RATE, set output rate to RATE FILE is the file to…
esdloop – The Enlightened Sound Daemon Descriptionesdloop is test scaffolding for sample cache, loop, and free. Usageesdloop ["-s" server ] ["-b"] ["-m"] ["-r" freq] < file See Alsoesd(1), esdcat(1), esddsp(1), esdplay(1), esdsample(1), esd-config(1), esdctl(1), esdfilt(1), esdmon(1), esdrec(1)
esdfilt – The Enlightened Sound Daemon DescriptionEsounD filter. Sample esd filter program that implements halving and doubling, Optionally writing the new data to a seperate file. Usageesdfilt [OPTIONS] [FILE] "-s", –server=HOSTNAME set EsounD server "-b", output file should be 8-bit "-m", output file should be mono "-r" RATE, set output rate to RATE "-half" halve…
esddsp – attempt to reroute audio device to esd Descriptionesddsp can allow non-esd applications to be routed through esd. Usageesddsp [options] player arguments options: -h, –help show brief help -s, –server=HOST:PORT contact esd server on host at port -m, –mixer enable mixer support -n, –name=NAME use name to identify player to esd -v, –verbose show…
esdctl – The Enlightened Sound Daemon DescriptionCommand-line control program for EsounD Usageesdctl [options] [command] options: "-s", –server=host:port contact esd server on host at port commands: lock foreign clients may not use the server unlock foreign clients may use the server standby, off suspend sound output for other programs resume, on resume sound output cache sample…
esdcompat – PulseAudio ESD wrapper script Synopsisesdcompat [options] esdcompat –help esdcompat –version Descriptionesdcompat is a compatibility script that takes the same arguments as the ESD sound daemon esd(1), but uses them to start a the PulseAudio sound server with the appropriate parameters. It is required to make PulseAudio a drop-in replacement for esd, i.e. it…
esdcat – play a sound file from stdin Synopsisesdcat [-s hostname:port] ["-n" name] [-b] [-h] [-m] [-r freq] < file DescriptionThe esdcat application pipes data from stdin to the sound device, using the Enlightened Sound Daemon (esd). OptionsThe following options are supported: -s hostname:port Contact the esd server on hostname at port. -b Specify that…
esd – The Enlightened Sound Daemon DescriptionStarts up EsounD, which provides a sound mixing server. Usageesd [options] -d DEVICE force esd to use sound device DEVICE -b run server in 8 bit sound mode -r RATE run server at sample rate of RATE -as SECS free audio device after SECS of inactivity (-1 to disable)…
esd-config – The Enlightened Sound Daemon Descriptionesd-config is a tool that is used to configure to determine the compiler and linker flags that should be used to compile and link programs that use EsounD. It is also used internally to the .m4 macros for GNU autoconf that are included with EsounD. Usageesd-config [–prefix[=DIR]] [–exec-prefix[=DIR]] [–version]…
escputil – maintain Epson Stylus inkjet printers Synopsisescputil [ -P printer | -r device ] [ -m model ] [ -S ] [ -C ] [ -p ] [ -u ] [ -c | -n | -a | -i | -d | -o | -s | -l | -M | -h ] [ -q ]…
escp2topbm – convert an ESC/P2 printer file to a PBM image Synopsisescp2topbm [printfile] DescriptionThis program is part of Netpbm(1) escp2topbm reads an ESC/P2 printer control stream as input. It produces a PBM image as output. escp2topbm filters the raster graphic content from an Epson ESC/P2 printer control stream and writes the image it would print…
esc – Minimal Command-Line Interface for Smart Card Manager. Synopsisesc [options] Descriptionesc provides a minimal command-line interface to Smart Card Manager which allows users to manage Smart Cards on the system. The program is most often run automatically when the user logs into the system or when an actual smart card is entered into the…
esc-m – ease viewing output of driver data Synopsisesc-m Descriptionesc-m is meant to make the understanding of the printer driver easier. It reads from stdin and prints some info to stdout. See Alsomin12xxw(1)
eruby – Embedded Ruby Language Synopsiseruby [options] [inputfile] Descriptioneruby interprets a Ruby code embedded text file. For example, eruby enables you to embed a Ruby code to a HTML file. A Ruby block starts with `<%’ and ends with `%>’. eRuby replaces the block with its output. If `<%’ is followed by `=’, eRuby replaces…
errno – look up errno names and descriptions Synopsis errno {name-or-code} errno [-ls] [–list] errno [-s] [–search] {word} errno [-S] [–search-all-locales] {word}Descriptionerrno looks up errno macro names, errno codes, and the corresponding descriptions. For example, if given ENOENT on a Linux system, it prints out the code 2 and the description "No such file or…