SBCL — Steel Bank Common Lisp DescriptionSBCL is an implementation of ANSI Common Lisp, featuring a high-performance native compiler, native threads on several platforms, a socket interface, a source-level debugger, a statistical profiler, and much more. It is free software, mostly in the public domain, but with some subsystems under BSD-style licenses which allow modification…
sbattach – UEFI secure boot detached signature tool Synopsissbattach ,–attach <sigfile> <efi-boot-image>/ sbattach ,–detach <sigfile> /[,–remove/] ,<efi-boot-image>/ sbattach ,–remove <efi-boot-image>/ DescriptionAttach or detach a signature file to/from a boot image Options–attach <sigfile> set <sigfile> as the boot image’s signature table –detach <sigfile> copy the boot image’s signature table to <sigfile> –remove remove the boot image’s…
saxon8q – manual page for saxon8q Synopsissaxon8q [options] query [ params…] Descriptionsaxon8q runs a query contained in a file. OptionsThe options must come first, then the file name containing the query, then the params. The options are as follows (in any order): -cr classname Use the specified CollectionURIResolver to process collection URIs passed to the…
saxon8 – manual page for saxon8 Synopsissaxon8 [options] source-document stylesheet [ params…] Descriptionsaxon8 applies a given stylesheet to a given source XML document. OptionsFor a schema-aware transformation, specify the option -sa, or (on the Java platform only) use the alternate entry point com.saxonica.Transform. For more details see Schema-Aware Transformations. The options must come first, then…
savetextmode, textmode – save or restore the complete SVGA status for textmode. Synopsissavetextmode textmode DescriptionThese are simple scripts to save the SVGA register state when in textmode to the files /etc/vga/fontdata and /etc/vga/textregs ($HOME/.vga/fontdata and $HOME/.vga/textregs if directory /etc/vga is not writeable) or to restore it from these files. The actual utilities used are restorefont(1),…
satyr – create and manipulate problem reports Synopsissatyr <command> [option…] Descriptionsatyr is a command line tool that creates anonymous reports of software problems that are suitable for automated processing. The tool has to be invoked with a <command> that specifies the action to be performed. The available commands are documented below. OptionsCommands abrt-print-report-from-dir <directory> Creates…
sassc: – Sass compiles CSS from SASS or SCSS files Synopsissassc [,options/] [,INPUT/] [,OUTPUT/] Options-s, –stdin Read input from standard input instead of an input file. -t, –style NAME Output style. Can be: nested, expanded, compact, compressed. -l, –line-numbers Emit comments showing original line numbers. –line-comments -I, –load-path PATH Set Sass import path. -P, –plugin-path…
sar2pcp – import sar data and create a PCP archive Synopsissar2pcp infile outfile Descriptionsar2pcp is intended to read a binary System Activity Reporting (sar) data file as created by sadc(1) (infile) and translate this into a Performance Co-Pilot (PCP) archive with the basename outfile. However, if infile has the suffix .xml, then it will be…
sar – Collect, report, or save system activity information. Synopsissar [ -A ] [ -B ] [ -b ] [ -C ] [ -D ] [ -d ] [ -F [ MOUNT ] ] [ -H ] [ -h ] [ -p ] [ -r [ ALL ] ] [ -S ] [ -t ]…
sar – Collect, report, or save system activity information. Synopsissar [ -A ] [ -B ] [ -b ] [ -C ] [ -D ] [ -d ] [ -F [ MOUNT ] ] [ -H ] [ -h ] [ -p ] [ -r [ ALL ] ] [ -S ] [ -t ]…
SAOimage 1.23 – X11 window based, interactive, color or halftone image display program for astronomical images Synopsissaoimage [ -display nodename:0.0 ] [ -geometry | -gd geometry ] [ -pros | +/-imtool | -fits | -dfits | -oif ] [ -u1 | -u2 | -i2 | -i4 | -r4 | -r8 [ width height…
sane-find-scanner – find SCSI and USB scanners and their device files Synopsissane-find-scanner [-?|-h|–help] [-v] [-q] [-p] [-f] [-F filename] [devname] Descriptionsane-find-scanner is a command-line tool to find SCSI and USB scanners and determine their UNIX device files. Its primary aim is to make sure that scanners can be detected by SANE backends. For SCSI scanners,…
sane-config – get information about the installed version of libsane Synopsissane-config [–prefix] [–exec-prefix] [–libs] [–cflags] [–ldflags] [–version] [–help [OPTION]] Descriptionsane-config is a tool that is used to determine the compiler and linker flags that should be used to compile and link SANE frontends to a SANE backend library (libsane). Optionssane-config accepts the following options (you…
samtools – Utilities for the Sequence Alignment/Map (SAM) format Synopsissamtools addreplacerg -r ‘ID:fish’ -r ‘LB:1334’ -r ‘SM:alpha’ -o output.bam input.bam samtools ampliconclip -b bed.file input.bam samtools ampliconstats primers.bed in.bam samtools bedcov aln.sorted.bam samtools calmd in.sorted.bam ref.fasta samtools cat out.bam in1.bam in2.bam in3.bam samtools collate -o aln.name_collated.bam aln.sorted.bam samtools consensus -o out.fasta in.bam samtools coverage aln.sorted.bam…
sample1d – Resample 1-D table data using splines Synopsissample1d [ table ] [ f|p|m|r|R[+l] ] [ l|a|c|n[+1|+2] ] [ inc[unit] ] [ knotfile ] [ start[/stop] ] [ col ] [ [level] ] [ -b<binary> ] [ -d<nodata> ] [ -f<flags> ] [ -g<gaps> ] [ -h<headers> ] [ -i<flags> ] [ -o<flags> ] Note:…
saml_assertion_init – ARC client to voms saml service, or arc aa service DescriptionThe saml_assertion_init command is a prototype client which is used for sending an attribute query request to a voms saml service or arc aa service. Synopsissaml_assertion_init [options] [filename …] saml_assertion_init -c saml_assertion_init_client.xml -d DEBUG https://squark.uio.no:8443/voms/saml/knowarc/services/AttributeAuthorityPortType Options-c [-]configurefile, -conf [-]configurefile specify the configuration file…
samefile – find identical files Synopsissamefile [-g size] [-l | -r] [-s sep] [-0aiqVvx] Descriptionsamefile reads a list of filenames (one filename per line) from stdin. For each filename pair with identical contents, a line consisting of six fields is output: The size in bytes, two filenames, the character “=” if the two files are…
samdump2 retrieves syskey and extract hashes from Windows 2k/NT/XP/Vista SAM. Synopsissamdump2 [-d] [-o file] <system hive> <sam hive> Options-d enable debugging -h display this help -o file write output to fileExamplesamdump2 -o out /mnt/ntfs/WINDOWS/system32/config/SYSTEM /mnt/ntfs/WINDOWS/system32/config/sam AuthorThis manual page was written by Adam Cecile <gandalf [at] le-vert.net> for the Debian system (but may be used by…
salt-unity – salt-unity Command A unified invocation wrapper around other Salt CLI scripts. Synopsissalt-unity salt ‘*’ test.pingDescriptionThis script takes an argument which is one of the other Salt CLI scripts and invokes that script. OptionsSee Alsosalt-api(1) salt-call(1) salt-cloud(1) salt-cp(1) salt-key(1) salt-main(1) salt-master(1) salt-minion(1) salt-run(1) salt-ssh(1) salt-syndic(1) AuthorThomas S. Hatch <thatch45 [at] gmail.com> and many others,…
salt-syndic – salt-syndic Documentation The Salt syndic daemon, a special minion that passes through commands from a higher master Synopsissalt-syndic [ options ]DescriptionThe Salt syndic daemon, a special minion that passes through commands from a higher master. Options–version Print the version of Salt that is running. –versions-report Show program’s dependencies and version number, and then…