nmtui – Text User Interface for controlling NetworkManager Synopsis nmtui-edit | nmtui edit {name | id} nmtui-connect | nmtui connect {name | uuid | device | SSID} nmtui-hostname | nmtui hostname Descriptionnmtui is a curses-based TUI application for interacting with NetworkManager. When starting nmtui, the user is prompted to choose the activity to perform unless it was specified as the first argument. The…
nmtui – Text User Interface for controlling NetworkManager Synopsis nmtui-edit | nmtui edit {name | id} nmtui-connect | nmtui connect {name | uuid | device | SSID} nmtui-hostname | nmtui hostname Descriptionnmtui is a curses-based TUI application for interacting with NetworkManager. When starting nmtui, the user is prompted to choose the activity to perform unless it was specified as the first argument. The…
nmh – new MH message system Synopsisany nmh command Descriptionnmh is the name of a powerful message handling system. Rather than being a single comprehensive program, nmh consists of a collection of fairly simple single-purpose programs to send, retrieve, save, and manipulate messages. Unlike most mail clients in UNIX, nmh is not a closed system…
nmcli – command-line tool for controlling NetworkManager Synopsis nmcli [OPTIONS…] {help | general | networking | radio | connection | device | agent | monitor} [COMMAND] [ARGUMENTS…]Descriptionnmcli is a command-line tool for controlling NetworkManager and reporting network status. It can be utilized as a replacement for nm-applet or other graphical clients. nmcli is used to…
nmbscan – NMB/SMB network scanner Synopsisnmbscan -L nmbscan {-d|-m|-a} nmbscan {-h|-n} host1 [host2 […]] DescriptionThis manual page documents briefly the nmbscan command. nmbscan scans the shares of a SMB/NetBIOS network, using the NMB/SMB/NetBIOS protocols. It is useful for acquiring information on a local area network for such purposes as security auditing. It can obtain such…
nmblookup4 – NetBIOS over TCP/IP client used to lookup NetBIOS names Synopsis nmblookup4 [-M] [-R] [-S] [-r] [-A] [-h] [-B <broadcast address>] [-U <unicast address>] [-d <debug level>] [-s <smb config file>] [-i <NetBIOS scope>] [-T] [-f] {name}DescriptionThis tool is part of the samba(7) suite. nmblookup4 is used to query NetBIOS names and map them to IP addresses in a…
nmblookup – NetBIOS over TCP/IP client used to lookup NetBIOS names Synopsisnmblookup [-M|–master-browser] [-R|–recursion] [-S|–status] [-r|–root-port] [-A|–lookup-by-ip] [-B|–broadcast <broadcast address>] [-U|–unicast <unicast address>] [-d <debug level>] [-s <smb config file>] [-i <NetBIOS scope>] [-T|–translate] [-f|–flags] {name}DescriptionThis tool is part of the samba(7) suite. nmblookup is used to query NetBIOS names and map them to IP addresses in a network using…
nmap – Network exploration tool and security / port scanner Synopsis nmap [Scan Type…] [Options] {target specification}DescriptionNmap (“Network Mapper”) is an open source tool for network exploration and security auditing. It was designed to rapidly scan large networks, although it works fine against single hosts. Nmap uses raw IP packets in novel ways to determine…
nm – list symbols from object files Synopsisnm [-A|-o|–print-file-name] [-a|–debug-syms] [-B|–format=bsd] [-C|–demangle[=style]] [-D|–dynamic] [-fformat|–format=format] [-g|–extern-only] [-h|–help] [–ifunc-chars=CHARS] [-j|–format=just-symbols] [-l|–line-numbers] [–inlines] [-n|-v|–numeric-sort] [-P|–portability] [-p|–no-sort] [-r|–reverse-sort] [-S|–print-size] [-s|–print-armap] [-t radix|–radix=radix] [-u|–undefined-only] [-U method] [–unicode=method] [-V|–version] [-X 32_64] [–defined-only] [–no-demangle] [–no-recurse-limit|–recurse-limit]] [–plugin name] [–size-sort] [–special-syms] [–synthetic] [–target=bfdname] [–with-symbol-versions] [–without-symbol-versions] [objfile…] DescriptionGNU nm lists the symbols from object files objfile…. If no object files…
nm-online – ask NetworkManager whether the network is connected Synopsis nm-online [OPTIONS…]Descriptionnm-online is a utility to find out whether we are online. It is done by asking NetworkManager about its status. When run, nm-online waits until NetworkManager reports an active connection, or specified timeout expires. On exit, the returned status code should be checked (see…
nm-connection-editor – network connection editor for NetworkManager Synopsisnm-connection-editor [ OPTIONS ] Descriptionnm-connection-editor is a GTK-based application to add, remove, and modify network connections stored by NetworkManager. NetworkManager must be running for any network connections to be added, removed, or modified. Options-t, –type=<type> Type of connection to create or show. Values are NetworkManager setting names, eg…
nm-applet – network monitor and control GUI applet Synopsisnm-applet [ OPTIONS ] Descriptionnm-applet is a GTK-based GUI applet to monitor network status and devices and to start and stop network connections managed by NetworkManager. nm-applet is normally started at login by the desktop session manager and does not need to be run manually. nm-applet conforms…
clogin – Cisco login script Synopsisclogin [-autoenable] [-noenable] [-dSV] [-c command] [-E var=x] [-e enable-password] [-f cloginrc-file] [-p user-password] [-s script-file] [-t timeout] [-u username] [-v vty-password] [-w enable-username] [-x command-file] [-y ssh_cypher_type] router [router…] Descriptionclogin is an expect(1) script to automate the process of logging into a Cisco router, Catalyst switch, Extreme switch, Juniper…
nload – displays the current network usage Synopsisnload [-a period] [-i max_scaling] [-m] [-o max_scaling] [-t interval] [-u h|H|b|B|k|K|m|M|g|G] [-U h|H|b|B|k|K|m|M|g|G] [devices] nload –help|-h Descriptionnload is a console application which monitors network traffic and bandwidth usage in real time. It visualizes the in- and outgoing traffic using two graphs and provides additional info like the…
nlmconv – converts object code into an NLM. Synopsisnlmconv [-I bfdname|–input-target=bfdname] [-O bfdname|–output-target=bfdname] [-T headerfile|–header-file=headerfile] [-d|–debug] [-l linker|–linker=linker] [-h|–help] [-V|–version] infile outfile Descriptionnlmconv converts the relocatable i386 object file infile into the NetWare Loadable Module outfile, optionally reading headerfile for NLM header information. For instructions on writing the NLM command file language used in header files, see the linkers section, NLMLINK…
naim – console mode chat client Synopsisnaim nicq nirc [nickname [server]] nlily Descriptionnaim is the original ncurses AIM client. It uses the TOC protocol, and features many commonly-requested features found nowhere else, while still providing an intuitive chat interface. OptionsIf a `.naimrc‘ file exists in your home directory, naim executes that and ignores all command…
nl – number lines of files Synopsisnl [,OPTION/]… [,FILE/]… DescriptionWrite each FILE to standard output, with line numbers added. With no FILE, or when FILE is -, read standard input. Mandatory arguments to long options are mandatory for short options too. -b, –body-numbering=,STYLE/ use STYLE for numbering body lines -d, –section-delimiter=,CC/ use CC for logical…
nkf – Network Kanji Filter Synopsisnkf [-butjnesliohrTVvwWJESZxXFfmMBOcdILg] [file …] DescriptionNkf is a yet another kanji code converter among networks, hosts and terminals. It converts input kanji code to designated kanji code such as ISO-2022-JP, Shift_JIS, EUC-JP, UTF-8, UTF-16 or UTF-32. One of the most unique faculty of nkf is the guess of the input kanji…
nitroshare – launches the NitroShare application Synopsisnitroshare [options] DescriptionNitroShare is a cross-platform application for sharing files over a local network. Each device on the network with NitroShare installed can instantly transfer files and directories to other devices.
nitrogen – X11 background previewer and setter Synopsisnitrogen [ OPTIONS ] DIRECTORY? DescriptionIn normal working mode, provides an interface which displays all pictures in the given DIRECTORY. From this interface, it is possible to set the X11 root pixmap either temporarily or set and store the picture, drawing mode, and X display for restoration later….