mmd – make an MSDOS subdirectory Note of warningThis manpage has been automatically generated from mtools’s texinfo documentation, and may not be entirely accurate or complete. See the end of this man page for details. DescriptionThe mmd command is used to make an MS-DOS subdirectory. Its syntax is: mmd [-D clash_option] msdosdirectory [ msdosdirectories… ]…
mmcli – Control and monitor the ModemManager Synopsismmcli [OPTION…] DescriptionModemManager is a DBus-powered Linux daemon which provides a unified high level API for communicating with (mobile broadband) modems. It acts as a standard RIL (Radio Interface Layer) and may be used by different connection managers, like NetworkManager. Thanks to the built-in plugin architecture, ModemManager talks…
mmcat – Output the contents of a partition to stdout Synopsismmcat [-t mmtype ] [-o offset ] [ -i imgtype ] [-b dev_sector_size] [-vV] image [images] part_num Descriptionmmcat outputs the contents of a specific volume to stdout. This allows you to extract the contents of a partition to a separate file. Arguments-t mmtype Specify the…
mmafm – creates AFM font metrics for multiple master fonts Synopsismmafm [OPTIONS…] font DescriptionMmafm creates AFM font metrics for PostScript multiple master fonts by interpolation. You pass it an AMFM file (multiple master font metrics) and options specifying the design point you want, and it writes the resulting AFM file to the standard output. Each…
mm3d – Misfit Model 3D Synopsismm3d [options] files… DescriptionThis manual page documents briefly the mm3d command. mm3d is an OpenGL-based 3D model editor that works with triangle-based models. It supports multi-level undo, skeletal animations, simple texturing, scripting, command-line batch processing, and a plugin system for adding new model and image filters. Complete online help is…
mm2gv – Matrix Market-DOT converters Synopsismm2gv [ -cluv? ] [ -Ui ] [ -ooutfile ] [ file ] Descriptionmm2gv converts a sparse matrix of the Matrix Market format to a graph in the GV (formerly DOT) format. If the matrix M is not square, the graph is considered bipartite and the matrix is viewed as…
mm-config – OSSP mm library configuration/build utility VersionOSSP mm 1.4.1 (10-Aug-2006) Synopsismm-config [–help] [–version] [–cflags] [–ldflags] [–libs] DescriptionThe mm-config program is a little helper utility for easy configuring and building applications based on the mm(3) library. It can be used to query the C compiler and linker flags which are required to correctly compile and…
mm-common-prepare – Prepare a C++ binding module to use mm-common Synopsismm-common-prepare [OPTION]… [SOURCE-DIR] DescriptionRun mm-common-prepare to install the mm-common build support files into the source tree of a C++ binding module. The exact location where these files will be installed can be influenced through special macros in the configure.ac file. AC_CONFIG_AUX_DIR([AUX-DIR]) The Automake include files…
mlton – whole-program compiler for the Standard ML (SML) programming language Synopsismlton [option …] file.{c|cm|mlb|o|sml} [file.{c|o|s|S} …] DescriptionMLton is run from the command line with a collection of options followed by a file name and a list of files with which to compile, assemble, and link with. The simplest case is to run mlton foo.sml,…
pdftex – PDF output from TeX Synopsispdftex [options] [&format] [file|\commands] DescriptionRun the pdfTeX typesetter on file, usually creating file.pdf. If the file argument has no extension, ".tex" will be appended to it. Instead of a filename, a set of pdfTeX commands can be given, the first of which must start with a backslash. With a…
mlprof – display profiling information for a MLton-compiled executable Synopsismlprof [option …] a.out [mlmon.out …] Descriptionmlprof extracts information from an executable compiled by MLton with -profile alloc or -profile time and the resulting mlmon.out file produced by running the executable. The output of mlprof consists of an initial line indicating the total amount of CPU…
locate – find files by name Synopsislocate [OPTION]… PATTERN… Descriptionlocate reads one or more databases prepared by updatedb(8) and writes file names matching at least one of the PATTERNs to standard output, one per line. If –regex is not specified, PATTERNs can contain globbing characters. If any PATTERN contains no globbing characters, locate behaves as…
mlmmj-unsub – unsubscribe address from a mailinglist run by mlmmj Synopsismlmmj-unsub -L /path/to/list -a john [at] doe.org [-b] [-c | -C] [-d | -n | -N] [-h] [-q] [-r | -R] [-s] [-U] [-V] -a: Email address to unsubscribe -b: Behave as if unsubscription is due to bouncing (internal use) -c: Send goodbye mail -C:…
mlmmj-sub – subscribe address to a mailinglist run by mlmmj Synopsismlmmj-sub -L /path/to/list [-a john [at] doe.org | -m str] [-c] [-C] [-d | -n] [-f] [-h] [-q] [-r | -R] [-s] [-U] [-V] -a: Email address to subscribe -c: Send welcome mail (unless requesting confirmation) -C: Request mail confirmation (unless switching versions) -d: Subscribe…
mlmmj-send – send mail to a mailinglist or similar Synopsismlmmj-send [-L /path/to/list | -l listctrl] -m /path/to/mail [-a] [-D] [-F] [-h] [-o] [-r] [-R] [-s] [-T] [-V] -a: Don’t archive the mail -D: Don’t delete the mail after it’s sent -F: What to use as MAIL FROM: -h: This help -l: List control variable. -L:…
mlmmj-recieve – recieve mails for an mlmmj managed mailinglist Synopsismlmmj-recieve -L /path/to/listdir [-h] [-V] [-P] [-F] -h: This help -F: Don’t fork in the background (debugging only) -L: Full path to list directory -P: Don’t execute mlmmj-process (debugging only) -V: Print versionDescriptionThe mlmmj-recieve binary is the one specified in the mailserver configuration file (aliases file),…
mlmmj-receive – receive mails for an mlmmj managed mailinglist Synopsismlmmj-receive -L /path/to/listdir [-h] [-V] [-P] [-F] -h: This help -F: Don’t fork in the background (debugging only) -L: Full path to list directory -P: Don’t execute mlmmj-process (debugging only) -V: Print versionDescriptionThe mlmmj-receive binary is the one specified in the mailserver configuration file (aliases file),…
mlmmj-process – process mail for an mlmmj managed mailinglist Synopsismlmmj-process -L /path/to/list -m /path/to/mail [-h] [-P] [-V] -h: This help -L: Full path to list directory -m: Full path to mail file -P: Don’t execute mlmmj-send (debugging only) -V: Print versionDescriptionThis is the binary which processes a mail. Examples of what such processing is: •…
mlmmj-make-ml – create a mailing list for mlmmj Synopsismlmmj-make-ml [-h] [-L listname] [-s spooldir] [-a] [-c user] [-z] -h: Display help -L: The name of the mailing list -s: Your spool directory (default /var/spool/mlmmj) -a: Create the needed entries in your /etc/aliases file -c: User to chown the spool directory to (default not to chown…
mlmmj-maintd – maintenance for mlmmj maintained lists Synopsismlmmj-maintd [-F] [-d | -L] /path/to/dir -d: Full path to directory with lists -L: Full path to list directory -F: Don’t fork, performing one maintenance run only.DescriptionThis is the program doing the maintenance for an mlmmj based mailing list. It will unsubscribe people who have bounced for long…