gpvc – GNU PIC COD file viewer Synopsisgpvc [options] file WarningThe information in this man page is an extract from the full documentation of gputils and is limited to the meaning of the options. For complete and current documentation, refer to "gputils.ps" located in the gputils docs directory. Descriptiongpvc is an COD file viewer for…
gputils – GNU PIC utilities Descriptiongputils is a collection of development tools for Microchip (TM) PIC (TM) microcontrollers. It’s intended to be compatible with the manufacturer’s tools, MPASM, MPLINK and MPLIB. See Alsogpasm(1), gpdasm(1), gplib(1), gplink(1), gpstrip(1), gpvc(1), gpvo(1) AuthorCraig Franklin <craigfranklin [at] users.sourceforge.net> CopyrightCopyright (C) 2002, 2003, 2004, 2005 James Bowman, Craig Franklin This…
gpstrip – discard symbols from object file Synopsisgpstrip [options] [file(s)] WarningThe information in this man page is an extract from the full documentation of gputils and is limited to the meaning of the options. For complete and current documentation, refer to "gputils.ps" located in the gputils docs directory. Descriptiongpstrip discards symbols from GNU PIC object…
gpsprof – profile a GPS and gpsd, plotting latency information Synopsis gpsprof [-f plot_type] [-m threshold] [-n packetcount] [-t title] [-T terminal] [-d dumpfile] [-l logfile] [-r] [-D debuglevel] [-h] [[server[:port[:device]]]]Descriptiongpsprof performs accuracy, latency, and time drift profiling on a GPS. It emits to standard output a GNUPLOT program that draws one of several illustrative graphs. It can also be told to emit…
gpspipe – tool to connect to gpsd and retrieve sentences Synopsis gpspipe [-h] [-d] [-l] [-o filename] [-n count] [-r] [-R] [-s serial-device] [-t] [-T timestamp-format] [-u] [-p] [-w] [-S] [-2] [-v] [-D debug-level] [server [:port [:device]]]Descriptiongpspipe is a tool to connect to gpsd and output the received sentences to stdout. This makes the program useful as a pipe from…
gpsmon – real-time GPS packet monitor and control utility Synopsis gpsmon [-L] [-V] [-h] [-n] [-a] [-l logfile] [-t driver-prefix] [[ server [:port [:device]] | device]] [-D debuglevel]Descriptiongpsmon is a monitor that watches packets coming from a GPS and displays them along with diagnostic information. It supports commands that can be used to tweak GPS settings in various ways; some are device-independent, some…
gpsman – a (graphical) manager of GPS data Synopsisgpsman [-dev [usb=]DEVICE] gpsman [OPTIONS] COMMAND [COMMAND_ARGS] Descriptiongpsman GPS Manager (GPSMan) is a graphical manager of GPS data that makes possible the preparation, inspection and edition of GPS data in a friendly environment. GPSMan supports communication and real-time logging with Garmin, Lowrance and Magellan receivers and accepts…
gpsflash – 2-stage firmware loader for GPS chipsets Synopsis gpsflash [-n] [-l loader-file] -f firmware-file {tty}DescriptionThis program is a firmware loader for GPSes connected to your host computer via serial or USB port. Presently it supports only SiRF GPSes. Other GPSes may be supported in the future if the vendors cooperate. For operation, this program requires a…
gpsfake – test harness for gpsd, simulating a GPS Synopsis gpsfake [-1] [-h] [-b] [-f] [-c interval] [-i] [-D debuglevel] [-l] [-m monitor] [-g] [-n] [-o options] [-p] [-P port] [-r initcmd] [-s speed] [-u] [-t] [-v] [logfile…]Descriptiongpsfake is a test harness for gpsd and its clients. It opens a pty (pseudo-TTY), launches a gpsd instance that thinks the slave side of…
gpsdrive – displays GPS position on a map Synopsisgpsdrive [options] About this manual pageThis manual page explains the basic functions of GpsDrive 2.10 and additional information regarding map setup and interfacing with support software. Within GpsDrive nearly all buttons have tooltips and there is also a HELP window describing the usage of mouse buttons and…
gpsdecode – decode GPS, RTCM or AIS streams into a readable format Synopsis gpsdecode [-c] [-d] [-e] [-j] [-s] [-t typelist] [-u] [-v] [-D debuglevel] [-V]DescriptionThis tool is a batch-mode decoder for NMEA and various binary packet formats associated with GPS, AIS, and differential-correction services. It produces a JSON dump on standard output from binary on standard…
gpsd_nmea.sh – switches your gpsd to NMEA mode Synopsisgpsdrive [options] This is needed for some Gps-Receivers with SIF Chip�set. If you don’t switch them into NMEA mode the position will lag about 5-10 seconds behind the reality. AuthorJ�rg Ostertag http://www.gpsdrive.de WarrantyThis program is distributed in the hope that it will be useful, but WITHOUT ANY…
gpsctl – control the modes of a GPS Synopsis gpsctl [-h] [-b | -n] [-x control] [-e] [-f] [-l] [-s speed] [-t devicetype] [-D debuglevel] [-V] [serial-port]Descriptiongpsctl can switch a dual-mode GPS between NMEA and vendor-binary modes. It can also be used to set the device baudrate. Note: Not all devices have these capabilities. If you have only one…
gpscorrelate – correlates digital images with GPS data filling EXIF fields Synopsis gpscorrelate [-z | –timeadd +/-HH[:MM]] [-O | –photooffset seconds] [-i | –no-interpolation] [-v | –verbose] [-d | –datum datum] [-n | –no-write] [-m | –max-dist time] [-t | –ignore-tracksegs] [-M | –no-mtime] [-f | –fix-timestamps] [-p | –degmins] -g file.gpx image.jpg… gpscorrelate -s | –show | -o |…
gpscat – dump the output from a GPS Synopsis gpscat [-s speed] [-p] [-t] [-D debuglevel] file-or-serial-portDescriptiongpscat is a simple program for logging and packetizing GPS data streams. It takes input from a specified file or serial device (presumed to have a GPS attached) and reports to standard output. The program runs until end of input or…
gps2udp – feed the take from gpsd to one or more aggregation sites Synopsis gps2udp [-h] [-n] [-j] [-a] [-u hostname:udpport] [-c count] [-d 1|2] [-v] [server [:port [:device]]]Descriptiongps2udp is a tool to connect to gpsd and output the received sentences to one or many UDP host:port destinations. This makes the program useful for feeding AIS information from…
gps, xgps, xgpsspeed, cgps, lcdgps, gegps – test clients for gpsd Synopsis xgps [-D debug-level] [-h] [-V] [-l [[d] | [m] | [s]]] [-u [[i] | [n] | [m]]] [server [:port [:device]]] xgpsspeed [-D debug-level] [-h] [-V] [–speedunits {[mph] | [kph] | [knots]}] [server [:port [:device]]] cgps [-D debug-level] [-h] [-V] [-l [[d] | [m] | [s]]] [-m] [-s] [-u [[i] | [n] | [m]]] [server [:port [:device]]] lcdgps [-h] [-V] [-l [[d] | [m] | [s]]] [-u [[i] | [n] | [m]]] [server [:port [:device]]] gpxlogger [-D debug-level] [-d] [-e export-method] [-f filename] [-l] [-m minmove]…
gprof – display call graph profile data Synopsisgprof [ -[abcDhilLrsTvwxyz] ] [ -[ACeEfFJnNOpPqQRStZ][name] ] [ -I dirs ] [ -d[num] ] [ -k from/to ] [ -m min-count ] [ -R map_file ] [ -t table-length ] [ –[no-]annotated-source[=name] ] [ –[no-]exec-counts[=name] ] [ –[no-]flat-profile[=name] ] [ –[no-]graph[=name] ] [ –[no-]time=name] [ –all-lines ] [ –brief ] [ –debug[=level] ] [ –function-ordering ] [ –file-ordering map_file ] [ –directory-path=dirs ] [ –display-unused-functions ] [ –file-format=name ] [ –file-info ] [ –help ] [ –line ] [ –inline-file-names ] [ –min-count=n ] [ –no-static ] [ –print-path ] [ –separate-files ] [ –static-call-graph ] [ –sum ] [ –table-length=len ] [ –traditional ] [ –version ] [ –width=n ] [ –ignore-non-functions ] [ –demangle[=STYLE] ] [ –no-demangle ] [–external-symbol-table=name] [ image-file ] [ profile-file … ] Description"gprof" produces an execution profile of C, Pascal, or Fortran77 programs. The effect of called routines is incorporated in the profile of each caller….
gprocessor – Gnash SWF Processor Synopsisgprocessor (options)… (file)…DescriptionGprocessor is a debugging tool for SWF files, a companion to Gnash. It is most often used for debugging and running testcases, as it is equivalant to running Gnash with no graphic output. This tool is primarily used by Gnash developers, or anyone who wishes to run the…
gpredict – real-time satellite tracking and orbit prediction program Synopsisgpredict [OPTION]… DescriptionGpredict is a real-time satellite tracking and orbit prediction program. It can track an unlimited number of satellites and display the satellite data in various visualisation modules like lists, maps and polar plots. Gpredict can also provide detailed information about upcoming satellite passes relative…