NAME abrt-merge-pstoreoops – Scans files for split oops message. Can print and/or delete them. SYNOPSIS abrt-merge-pstoreoops [-v] [-od] FILE… DESCRIPTION This tool takes list of files, reads all of the files, scans them for split oops messages and join oops parts to original oops message. OPTIONS -o Print found oopses -d Delete files with found…
NAME abrt-install-ccpp-hook – Install coredump handler. SYNOPSIS abrt-install-ccpp-hook install | uninstall | is-installed DESCRIPTION abrt-install-ccpp-hook registers ABRT coredump handler (which saves segfault data) into kernel. OPTIONS install Install coredump handler. uninstall Uninstall coredump handler. is-installed Returns 0 if handler is installed, otherwise 1. AUTHORS • ABRT team Index
NAME abrt-harvest-vmcore – Converts VMCores to ABRT problems SYNOPSIS abrt-harvest-vmcore DESCRIPTION This script is meant to be run once at system startup after abrtd is up and running. It moves all vmcore directories in /var/crash (which are presumably created by kdump) to abrtd spool directory. The goal is to let abrtd notice and process them…
NAME abrt-harvest-pstoreoops – Reconstruct oops from /sys/fs/pstore/* files, create ABRT problems and remove the files SYNOPSIS abrt-harvest-pstoreoops DESCRIPTION This script is meant to be run once at system startup after abrtd is up and running. It scans /sys/fs/pstore/*, reconstructs oops text(s) from these files, creates ABRT problem directories from them, then removes the files (pstore…
NAME abrt-handle-upload – Unpacks and moves problem data. SYNOPSIS abrt-handle-upload ABRT_DIR UPLOAD_DIR FILENAME DESCRIPTION The tool unpacks FILENAME located in UPLOAD_DIR and moves the problem data found in it to ABRT_DIR. It supports unpacking tarballs compressed by gzip, bzip2 or xz. It’s called by abrtd when a new file is noticed in the upload directory…
NAME abrt-dump-xorg – Extract Xorg crash from FILE (or standard input) SYNOPSIS abrt-dump-xorg [-vsoxm] [-d DIR]/[-D] [FILE] DESCRIPTION This tool creates problem directory from or prints Xorg crash extracted from FILE or standard input. OPTIONS -v, –verbose Be more verbose. Can be given multiple times. -s Log to syslog -o Print found crash data on…
NAME abrt-dump-oops – Extract oops from FILE (or standard input) SYNOPSIS abrt-dump-oops [-vusoxtm] [-d DIR]/[-D] [FILE] DESCRIPTION This tool creates problem directory from, updates problem directory with or prints oops extracted from FILE or standard input. FILES /etc/abrt/plugins/oops.conf Configuration file where user can disable detection of non-fatal MCEs OPTIONS -v, –verbose Be more verbose. Can…
NAME abrt-cli – List, remove, print, analyze, report problems SYNOPSIS abrt-cli [–authenticate] COMMAND [COMMAND OPTIONS] abrt-cli list [-vn] [–detailed] [–since NUM] [–until NUM] [DIR]… abrt-cli remove [-v] DIR… abrt-cli report [-v] [–delete] DIR… abrt-cli info [-v] [–detailed] [-s SIZE] DIR… abrt-cli status [-vb] [–since NUM] abrt-cli process [-v] [–since NUM] DIR… GLOBAL OPTIONS -a,–authenticate Enable…
NAME abrt-bodhi – The ABRT bodhi client. SYNOPSIS abrt-bodhi [-v] [-r[RELEASE]] (-b ID1[,ID2,…] | PKG-NAME) [PKG-NAME]… DESCRIPTION abrt-bodhi is the command-line tool for listing a new updates. Bodhi can be queried by release, bug id or package name. OPTIONS -v, –verbose Be verbose -r[RELEASE], –release[RELEASE] Specify a release (f16|rawhide) -b, –bugs ID1,ID2,.. Specify any number…
NAME abrt-backtrace – a backtrace analyzer for abrt SYNOPSIS abrt-backtrace [option]… [FILE] DESCRIPTION abrt-backtrace is a command line tool that analyzes backtraces produced by GDB and provides their textual representation useful for crash duplication detection. By default, abrt-backtrace prints the backtrace tree created by parsing the input file. OPTIONS Basic startup options -V, –version Displays…
NAME abrt-auto-reporting – Get or modify the auto reporting option values SYNOPSIS abrt-auto-reporting [-v] [ enabled | yes | 1 | on | disabled | no | 0 | off ] DESCRIPTION Reads the configuration from abrt.conf and saves the changes to the same file. The changes will take effect immediately without necessity to restart…
NAME abrt-applet – Applet which notifies user when new problems are detected by ABRT SYNOPSIS abrt-applet [-v] DESCRIPTION This tool listens on org.freedesktop.problems D-Bus bus and waits for Crash signal. When the tool detects the signal, it notifies user about new problem over a desktop specific notification pop-up. At start-up this tool checks for new…
NAME abrt-action-trim-files – Deletes old problem directories or files in specified directories until they are smaller than specified size. SYNOPSIS abrt-action-trim-files [-v] [-d SIZE:DIR]… [-f SIZE:DIR]… [-p DIR] [FILE]… OPTIONS -v Be more verbose. Can be given multiple times. -d SIZE:DIR Delete problem directories in DIR. SIZE can be suffixed by k,m,g,t to specify kilo,mega,giga,terabytes….
NAME abrt-action-save-package-data – Query package database and save package and component name. SYNOPSIS abrt-action-save-package-data [-v] [-c CONFFILE] -d DIR DESCRIPTION The tool reads problem directory DIR. It analyzes contents of analyzer, executable, cmdline and remote elements, checks database of installed packages, and creates new elements package and component. This data is usually necessary if the…
NAME abrt-action-save-kernel-data – Creates uReport mandatory files for kernel oopses. SYNOPSIS abrt-action-save-kernel-data DESCRIPTION The tool reads problem directory DIR. It analyzes contents of kernel element, checks database of installed packages, and creates new elements pkg_name, pkg_arch, pkg_version, pkg_release. These files are required by reporter-ureporter (mandatory in uReport). Integration with ABRT events This tool can be…
NAME abrt-action-perform-ccpp-analysis – Allows users to select acceptable way of core dump analysis SYNOPSIS abrt-action-perform-ccpp-analysis [-h] [-d PROBLEM_DIR] DESCRIPTION This tool allows user to select between local and remote core dump analysis. The local analysis may require to download huge amount of data but is completely safe. On the contrary the remote analysis only needs…
NAME abrt-action-notify – Announces a new occurrence of problem via all accessible channels SYNOPSIS abrt-action-notify [-h] -d PROBLEM_DIR [-v] [-a] [-e AUTOREPORTING_EVENT] DESCRIPTION The current implementation emits a D-Bus signal on System bus in path /org/freedesktop/problems of org.freedesktop.problems interface for Crash member. Integration with ABRT events abrt-action-notify is used to notify new problems and consecutive…
NAME abrt-action-list-dsos – Prints out DSO from mapped memory regions. SYNOPSIS abrt-action-list-dsos [-o OUTFILE] -m PROC_PID_MAP_FILE DESCRIPTION The tool reads a file containing the mapped memory regions. Output is printed to stdout or file. Output format: %p %n %v %i where %p path to library or binary file, which is mapped in memory region %n…
NAME abrt-action-install-debuginfo – Install debuginfos for build-ids SYNOPSIS abrt-action-install-debuginfo [-vy] [–ids=BUILD_IDS_FILE] [–tmpdir=TMPDIR] [–cache=CACHEDIR[:DEBUGINFODIR1:DEBUGINFODIR2…]] [–size_mb=SIZE] [-e PATH] DESCRIPTION Installs debuginfos for all build-ids listed in BUILD_IDS_FILE to CACHEDIR, using TMPDIR as temporary staging area. Old files in CACHEDIR are deleted until it is smaller than SIZE. OPTIONS -v Be more verbose. Can be given multiple times….
NAME abrt-action-generate-core-backtrace – Generates coredump-level backtrace SYNOPSIS abrt-action-generate-core-backtrace [-v] [-r] [-d DIR] DESCRIPTION This tool uses coredump from the file coredump and binary at the path stored in file executable in the problem directory to generate coredump-level backtrace. Coredump-level backtrace resembles ordinary backtrace in that it contains information about call frames present on the stack…