ip-link – network device configuration Synopsis ip link { COMMAND | help } ip link add [ link DEVICE ] [ name ] NAME [ txqueuelen PACKETS ] [ address LLADDR ] [ broadcast LLADDR ] [ mtu MTU ] [ index IDX ] [ numtxqueues QUEUE_COUNT ] [ numrxqueues QUEUE_COUNT ] [ gso_max_size BYTES…
ip-l2tp – L2TPv3 static unmanaged tunnel configuration Synopsis ip [ OPTIONS ] l2tp { COMMAND | help } ip l2tp add tunnel remote ADDR local ADDR tunnel_id ID peer_tunnel_id ID [ encap { ip | udp } ] [ udp_sport PORT ] [ udp_dport PORT ] [ udp_csum { on | off } ] […
ip-ioam – IPv6 In-situ OAM (IOAM) Synopsis ip ioam { COMMAND | help } ip ioam namespace show ip ioam namespace add ID [ data DATA32 ] [ wide DATA64 ] ip ioam namespace del ID ip ioam schema show ip ioam schema add ID DATA ip ioam schema del ID ip ioam namespace set…
ip-fou – Foo-over-UDP receive port configuration ip-gue – Generic UDP Encapsulation receive port configuration Synopsis ip [ OPTIONS ] fou { COMMAND | help } ip fou add port PORT { gue | ipproto PROTO } [ local IFADDR ] [ peer IFADDR ] [ peer_port PORT ] [ dev IFNAME ] ip fou del…
ip-fou – Foo-over-UDP receive port configuration ip-gue – Generic UDP Encapsulation receive port configuration Synopsis ip [ OPTIONS ] fou { COMMAND | help } ip fou add port PORT { gue | ipproto PROTO } [ local IFADDR ] [ peer IFADDR ] [ peer_port PORT ] [ dev IFNAME ] ip fou del…
ip-addrlabel – protocol address label management Synopsis ip addrlabel { COMMAND | help } ip addrlabel { add | del } prefix PREFIX [ dev DEV ] [ label NUMBER ] ip addrlabel { list | flush } Description IPv6 address labels are used for address selection; they are described in RFC 3484. Precedence is…
ip-address – protocol address management Synopsis ip [ OPTIONS ] address { COMMAND | help } ip address { add | change | replace } IFADDR dev IFNAME [ LIFETIME ] [ CONFFLAG-LIST ] ip address del IFADDR dev IFNAME [ mngtmpaddr ] ip address { save | flush } [ dev IFNAME ] […
iotop_selinux – Security Enhanced Linux Policy for the iotop processes Description Security-Enhanced Linux secures the iotop processes via flexible mandatory access control. The iotop processes execute with the iotop_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
iotop – simple top-like I/O monitor Synopsis iotop [OPTIONS] Description iotop watches I/O usage information output by the Linux kernel (requires 2.6.20 or later) and displays a table of current I/O usage by processes or threads on the system. At least the CONFIG_TASK_DELAY_ACCT, CONFIG_TASK_IO_ACCOUNTING, CONFIG_TASKSTATS and CONFIG_VM_EVENT_COUNTERS options need to be enabled in your Linux…
iotop – simple top-like I/O monitor Synopsis iotop [OPTIONS] Description iotop watches I/O usage information output by the Linux kernel (requires 2.6.20 or later) and displays a table of current I/O usage by processes or threads on the system. At least the CONFIG_TASK_DELAY_ACCT, CONFIG_TASK_IO_ACCOUNTING, CONFIG_TASKSTATS and CONFIG_VM_EVENT_COUNTERS options need to be enabled in your Linux…
iodined_selinux – Security Enhanced Linux Policy for the iodined processes Description Security-Enhanced Linux secures the iodined processes via flexible mandatory access control. The iodined processes execute with the iodined_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
iodined – tunnel IPv4 over DNS Synopsis iodined [-v] iodined [-h] iodined [-c] [-s] [-f] [-D] [-u user ] [-t chrootdir ] [-d device ] [-m mtu ] [-l listen_ip ] [-p port ] [-n ( auto | external_ip ) ] [-b dnsport ] [-P password ] [-z context ] [-F pidfile ] [-i max_idle_time…
iodine – tunnel IPv4 over DNS Synopsis iodine [-v] iodine [-h] iodine [-4] [-6] [-f] [-r] [-u user ] [-P password ] [-m fragsize ] [-t chrootdir ] [-d device ] [-R rdomain ] [-m fragsize ] [-M namelen ] [-z context ] [-F pidfile ] [-T dnstype ] [-O downenc ] [-L 0|1 ]…
inxi – Info script for console and IRC. Synopsis inxi inxi [-AbCdDfFGhHiIlMnNopPrsSu] [-c NUMBER] [-v NUMBER] inxi [-t (c or m or cm or cm NUMBER)] [-x LETTER(s)] [-xx LETTER] inxi [–help] [–recommends] [–version] [-@ NUMBER] Description inxi forum posts as well – for the same reason. It is is a fork of locsmif’s largely…
invoke-rc.d – executes System-V style init script actions Synopsis invoke-rc.d [–quiet] [–force] [–try-anyway] [–disclose-deny] [–query] [–no-fallback] name action [init script parameters…] invoke-rc.d [–help] Description invoke-rc.d is a generic interface to execute System V style init script /etc/init.d/name actions, obeying runlevel constraints as well as any local policies set by the system administrator. All access to…
invoke-rc.d – executes System-V style init script actions Synopsis invoke-rc.d [–quiet] [–force] [–try-anyway] [–disclose-deny] [–query] [–no-fallback] name action [init script parameters…] invoke-rc.d [–help] Description invoke-rc.d is a generic interface to execute System V style init script /etc/init.d/name actions, obeying runlevel constraints as well as any local policies set by the system administrator. All access to…
intuitively – Automagic configuration of network parameters Synopsis intuitively [ [ -V ] ] [ [ -f ] ] [ [ -v ] [ -q ] … ] [ [ -l location ] ] [ [ -i interface ] ] [ [ -c config_file ] ] [ [ -r location_file ] ] [ [ -S…
intro – introduction to administration and privileged commands Description Section 8 of the manual describes commands which either can be or are used only by the superuser, like system-administration commands, daemons, and hardware-related commands. As with the commands described in Section 1, the commands described in this section terminate with an exit status that indicates…
intltoolize – copy intltool related files to software package Synopsis intltoolize [option]… Description This prepares a package to use intltool by linking or copying various files needed by intltool into place for use when building. Note that you must change your working directory to the top level directory of the package before running intltoolize. Options…
intltool-update – updates PO template file and merge translations with it Synopsis intltool-update [option]… intltool-update LANGCODE Description intltool-update generates new po file templates from source code, and merges existing translations with these new po templates. You must change working directory to the subdirectory containing translations (usually "po/") before running intltool-update. Options When executing intltool-update ,…