gpsdctl – tool for sending commands to gpsd over its control socket Synopsis gpdsctl action device Description This is a tool for sending an instance of gpsd commands over its control socket to add or remove devices from the daemon’s device list. It is not intended to be called by users, but rather by the…
gpsd_selinux – Security Enhanced Linux Policy for the gpsd processes Description Security-Enhanced Linux secures the gpsd processes via flexible mandatory access control. The gpsd processes execute with the gpsd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
gpsd – interface daemon for GPS receivers Synopsis gpsd [-F control-socket] [-S listener-port] [-b] [-l] [-G] [-n] [-N] [-h] [-P pidfile] [-D debuglevel] [-V] [[source-name]…] Quick Start If you have a GPS attached on the lowest-numbered USB port of a Linux system, and want to read reports from it on TCP/IP port 2947, it will normally suffice to do…
gpm_selinux – Security Enhanced Linux Policy for the gpm processes Description Security-Enhanced Linux secures the gpm processes via flexible mandatory access control. The gpm processes execute with the gpm_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
gpm – a cut and paste utility and mouse server for virtual consoles Synopsis gpm [ options ] Description This package tries to be a useful mouse server for applications running on the Linux console. It is based on the "selection" package, and some of its code comes from selection itself. This package is intended…
gpg_web_selinux – Security Enhanced Linux Policy for the gpg_web processes Description Security-Enhanced Linux secures the gpg_web processes via flexible mandatory access control. The gpg_web processes execute with the gpg_web_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
gpg_selinux – Security Enhanced Linux Policy for the gpg processes Description Security-Enhanced Linux secures the gpg processes via flexible mandatory access control. The gpg processes execute with the gpg_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
gpg_pinentry_selinux – Security Enhanced Linux Policy for the gpg_pinentry processes Description Security-Enhanced Linux secures the gpg_pinentry processes via flexible mandatory access control. The gpg_pinentry processes execute with the gpg_pinentry_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
gpg_helper_selinux – Security Enhanced Linux Policy for the gpg_helper processes Description Security-Enhanced Linux secures the gpg_helper processes via flexible mandatory access control. The gpg_helper processes execute with the gpg_helper_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
gpg_agent_selinux – Security Enhanced Linux Policy for the gpg_agent processes Description Security-Enhanced Linux secures the gpg_agent processes via flexible mandatory access control. The gpg_agent processes execute with the gpg_agent_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
gparted – Gnome partition editor for manipulating disk partitions. Synopsis gparted [device]… Description The gparted application is the GNOME partition editor for creating, reorganizing, and deleting disk partitions. A disk device can be subdivided into one or more partitions. The gparted application enables you to change the partition organization on a disk device while preserving…
gogoc – gogoCLIENT Synopsis gogoc [-h ] [-? ] [-y ] [-n ] [-b ] gogoc [-f config_file ] [-i interface_name ] [-u interface_name ] [-s interface_name ] [-r retry_delay ] Description gogoc provides a means to configure a tunnel obtained from a tunnel server that supports the tunnel setup protocol (TSP). gogoc will connect…
goa-daemon – GNOME Online Accounts Daemon Synopsis goa-daemon [–help] [–replace] Description The goa-daemon program provides the org.gnome.OnlineAccounts name on the session message bus. Users or administrators should never need to start this daemon as it will be automatically started by dbus-daemon(1) whenever an application sends a D-Bus message to the org.gnome.OnlineAccounts name on the session…
gnomesystemmm_selinux – Security Enhanced Linux Policy for the gnomesystemmm processes Description Security-Enhanced Linux secures the gnomesystemmm processes via flexible mandatory access control. The gnomesystemmm processes execute with the gnomesystemmm_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
gnomeclock_selinux – Security Enhanced Linux Policy for the gnomeclock processes Description Security-Enhanced Linux secures the gnomeclock processes via flexible mandatory access control. Nsswitch Domain If you want to allow users to login using a sssd serve for the gnomeclock_t, you must turn on the authlogin_nsswitch_use_ldap boolean. setsebool -P authlogin_nsswitch_use_ldap 1 If you want to allow…
gnokiid – create a virtual modem for old Nokia mobile phones Synopsis gnokiid gnokiid [–help|–version|–debug] Description gnokiid is a tool from the gnokii tool suite used to create a virtual modem device with a Nokia portable telephone. The virtual modem device is usually accessed via a symbolic link called /dev/gnokii (created automatically by mgnokiidev(8)). Please…
gnokii-gnokii-smsd.- daemon for handling incoming and outgoing SMSes using libgnokii Synopsis gnokii-gnokii-smsd.[OPTIONS] Description The SMSD (SMS daemon) program is intended for receiving and sending SMSes. The program is designed to use modules (plugins) to work with different backends. Currently are supported PostgreSQL, MySQL and a special module ‘file’ which is designed to work without an…
gm-jobs – displays information and manages current jobs handled by ARC middleware Description gm-jobs displays information related to jobs handled by locally running ARC middleware service A-REX. Different kind of information may be selected by using various options. This utility also can perform simple management operations – currently cancel processing of specific jobs and remove…
gm-delegations-converter – converts delegations database between supported formats Description gm-delegations-converter converts delegations backend database storing information about accepted delegated credentials between supported formats. So far supported formats are Berkeley DB and SQLite. Converted database is stored in same location as the original one. Hence original database is overwritten and ready to be used immediately. Synopsis…
GlusterFS – Clustered Filesystem. Synopsis glusterfsd [options] [mountpoint] Description GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86-64 server with SATA-II RAID and…