freeipmi_bmc_watchdog_selinux – Security Enhanced Linux Policy for the freeipmi_bmc_watchdog processes Description Security-Enhanced Linux secures the freeipmi_bmc_watchdog processes via flexible mandatory access control. The freeipmi_bmc_watchdog processes execute with the freeipmi_bmc_watchdog_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
fragiso – split rpm packages from an iso and reassemble the iso later on Synopsis fragiso make iso fiso fragiso list fiso fragiso fill [-m] fiso iso Description fragiso can be used to convert an iso file into a fragment file, which is a list describing all of the rpms on the iso and a…
fprobe-ulog – a NetFlow probe Synopsis fprobe-ulog [options] remote:port[/[local][/type]] … Description fprobe-ulog – libipulog-based tool that collect network traffic data and emit it as NetFlow flows towards the specified collector. Options -h Display short help -U <mask> ULOG group bitwise mask. [default=1] -s <seconds> How often scan for expired flows. [default=5] -g <seconds> Fragmented flow…
fprintd_selinux – Security Enhanced Linux Policy for the fprintd processes Description Security-Enhanced Linux secures the fprintd processes via flexible mandatory access control. The fprintd processes execute with the fprintd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
fping – send ICMP ECHO_REQUEST packets to network hosts Synopsis fping [ options ] [ systems… ] fping6 [ options ] [ systems… ] Description fping is a program like ping which uses the Internet Control Message Protocol (ICMP) echo request to determine if a target host is responding. fping differs from ping in that…
fping – send ICMP ECHO_REQUEST packets to network hosts Synopsis fping [ options ] [ systems… ] fping6 [ options ] [ systems… ] Description fping is a program like ping which uses the Internet Control Message Protocol (ICMP) echo request to determine if a target host is responding. fping differs from ping in that…
fpga_load – Xorcom Astribank (xpp) firmware tool Synopsis fpga_load [-g] [-r] [-v] -D {/proc/bus/usb|/dev/bus/usb}/BUS/DEV fpga_load [-g] [-v] -D {/proc/bus/usb|/dev/bus/usb}/BUS/DEV -I firmware.hex [-b dump.bin] [-i] fpga_load -h Description fpga_load loads the FPGA firmware to the Xorcom Astribank device. The syntax resembles that of fxload(8). Options -b dump.bin Before writing firmware, bump the processed binary file to…
foremost – Recover files using their headers, footers, and data structures Synopsis foremost[-h][-V][-d][-vqwQT][-b<blocksize>][-o<dir>] [-t<type>][-s<num>][-i<file>] Builtin Formats Recover files from a disk image based on file types specified by the user using the -t switch. jpg Support for the JFIF and Exif formats including implementations used in modern digital cameras. gif png bmp Support for windows…
foomatic-preferred-driver – set default drivers in Foomatic database Synopsis foomatic-preferred-driver Description This command reads the printer database overview and puts default driver entries (<driver>..</driver>) into every printer’s XML database entry. It is very unlikely you need to do this.
foomatic-kitload – installs a data kit into the foomatic database. Synopsis foomatic-kitload [ -k kit-dir] [ -d dest-dir]… Description foomatic-kitload installs a foomatic data kit into the local data library. It takes a -k dirname option, where dirname is the toplevel directory of a foomatic driver "kit". A "kit" is a selection of XML source…
foomatic-getpjloptions – <put a short description here> Synopsis foomatic-getpjloptions device foomatic-getpjloptions hostname port Description foomatic-getpjloptions Sends a set of PJL commands and reads back the PJL options and status from a printer over a network connection or device bidirectional interface such as parallel, USB, serial. printers to standard output. The output can be piped into…
foomatic-addpjloptions – Format PJL option information the for foomatic database Synopsis foomatic-addpjloptions [-dafis][-o dir] -p printer_ID [pjl_info_file] foomatic-addpjloptions [-dafq] [pjl_info_file] foomatic-addpjloptions -h Description foomatic-addpjloptions formats the PJL information file (or STDIN) into a format usable by the Foomatic database. Options -a Convert all PJL options in the information file. -d Enable debugging information. -f Do…
foghorn_selinux – Security Enhanced Linux Policy for the foghorn processes Description Security-Enhanced Linux secures the foghorn processes via flexible mandatory access control. The foghorn processes execute with the foghorn_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
fmtdump – decode nmh format files Synopsis /usr/libexec/nmh/fmtdump [-form formatfile] [-format string] [-version] [-help] Description Fmtdump is a program that parses an nmh format file and produces a pseudo-language listing of the how nmh interprets the file. This is useful when debugging a complicated format file. The -format string and -form formatfile switches may be…
flush – Postfix fast flush server Synopsis flush [generic Postfix daemon options] Description The flush(8) server maintains a record of deferred mail by destination. This information is used to improve the performance of the SMTP ETRN request, and of its command-line equivalent, "sendmail -qR" or "postqueue -f". This program expects to be run from the…
floppy – format floppy disks Synopsis floppy [[–createrc >/etc/floppy] | [–format /dev/fdo] | [–format A:]] floppygtk Description The floppy utility does low-level formatting of floppy disks. floppy uses a simple interface for formatting disks in floppy controller drives and in ATAPI IDE floppy drives, such as LS-120 "Superdisk" drives. ATAPI IDE support requires a patch to the Linux…
flashrom – detect, read, write, verify and erase flash chips Synopsis flashrom [-n] [-V] [-f] [-h|-R|-L|-z|-E|-r <file>|-w <file>|-v <file>] [-c <chipname>] [-m [<vendor>:]<board>] [-l <file>] [-i <image>] [-p <programmername>[:<parameters>]] Description flashrom is a utility for detecting, reading, writing, verifying and erasing flash chips. It’s often used to flash BIOS/EFI/coreboot/firmware images in-system using a supported mainboard, but it also supports flashing of network cards…
fixup-memberof.pl – Directory Server perl script for memberOf attributes. Synopsis fixup-memberof.pl [-Z serverID] [-D rootdn] { -w password | -w – | -j filename } -b baseDN [-f filter] [-P protocol] [-v] [-h] Description Regenerates and updates memberOf on user entries to coordinate changes in group membership. Options A summary of options is included below:…
fixup-linkedattrs.pl – Directory Server perl script for creating a "fixup" task for linked attributes. Synopsis fixup-linkedattrs.pl [-Z serverID] [-D rootdn] { -w password | -w – | -j filename } [-l linkDN] [-P protocol] [-v] [-h] Description Creates the managed attributes in the user entries once the linking plug-in instance is created or updates the…
fixparts – MBR partition table repair utility Synopsis fixparts device Description FixParts (aka fixparts) is a text-mode menu-driven program for repairing certain types of problems with Master Boot Record (MBR) partition tables. The program has three design goals, although a few additional features are supported, as well: * It can remove stray GUID Partition Table…