dahdi_registration – Handle registration of Xorcom XPD modules in dahdi. Synopsis dahdi_registration [-s sortorder] [on|off] Description Without parameters, show all connected XPDs sorted by physical connector order. Each one is show to be unregistered (off), or registered to a specific dahdi span (the span number is shown). All registerations/deregisterations are sorted by physical connector string….
dahdi_monitor – checks the rx/tx levels of DAHDI channels Synopsis dahdi_monitor channel number [-v] [-f FILE] Description dahdi_monitor monitors a DAHDI channel. It gives you a visual representation of the sound strengths and makes it easy to see if the received or transmitted signals are too high or out of balance Options The first (mandatory)…
dahdi_hardware – Shows Dahdi hardware devices. Synopsis dahdi_hardware [-v][-x] Options -v Verbose ouput – show spans used by each device etc. Currently only implemented for the Xorcom Astribank. -x Show disconnected Astribank unit, if any. Description Show all dahdi hardware devices. Devices are recognized according to lists of PCI and USB IDs in Dahdi::Hardware::PCI.pm and…
dahdi_genconf – Generate configuration for dahdi channels. Synopsis dahdi_genconf [FILES…] Description This script generate configuration files for DAHDI hardware. The parameters are types of files to generate. By default it will generate the types ‘dahdi’ and ‘chan_dahdi’. See below a complete list. dahdi – /etc/dahdi/system.conf Configuration for dahdi_cfg(1). Its location may be overriden by the…
dahdi_cfg – configures DAHDI kernel modules from /etc/dahdi/system.conf Synopsis dahdi_cfg [-c CFG_FILE] [-s] [-f] [-t] [-v [-v … ] ] dahdi_cfg -h Description dahdi_cfg configures DAHDI interface cards from a config file. You generally need to run it with a valid configurations in order for DAHDI modules to work properly. It must be run to…
cytune – tune driver parameters for Cyclades-Z multiport serial card Synopsis cytune [-q [-i interval]] [{-s|-S} value] [-g|-G] [{-t|-T} timeout] tty… Description cytune queries and modifies the interruption threshold for the Cyclades driver. Each serial line on a Cyclades card has a 12-byte FIFO for input (and another 12-byte FIFO for output). The "threshold" specifies…
cyrus_selinux – Security Enhanced Linux Policy for the cyrus processes Description Security-Enhanced Linux secures the cyrus processes via flexible mandatory access control. The cyrus processes execute with the cyrus_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
* Name cyrus-master – cyrus-master Cyrus process Synopsis cyrus-master [ -C alternate imapd.conf ] [ -M alternate cyrus.conf ] [ -l listen queue ] [ -p pidfile ] [ -P snmp agentx ping interval ] [ -j janitor period ] [ -d ] [ -D ] [ -x snmp agentx socket ] Description Cyrus-master is…
* Name cyrfetchnews – retrieve new articles from peer and feed to Cyrus Synopsis cyrfetchnews [ -C config-file ] [ -s servername[:port] ] [ -n ] [ -y ] [ -w wildmat ] [ -f tstampfile ] [ -a authname [ -p password ] ] peername Description Cyrfetchnews retrieves news articles from a peer news…
* Name cyr_synclog – add entries to the replication log Synopsis cyr_synclog [ -C config-file ] [ -type ] <value> Description cyr_synclog is used to append a value to the log file. You can either specify the log type and value, or an entire log line. -u USER -v SIEVE -m MAILBOX -a APPEND -c…
* Name cyr_expire – expire messages and duplicate delivery database entries Synopsis cyr_expire [ -C config-file ] [ -D delete-days ] -E expire-duration [ -X expunge-days ] [ -p mailbox-prefix ] [ -v ] Description Cyr_expire is used to expire messages and duplicate delivery database entries. Cyr_expire also cleanses mailboxes of partially expunged messages (when…
* Name cyr_df – report Cyrus spool partition disk space usage Synopsis cyr_df [ -C config-file ] [ -m ] Description Cyr_df examines the Cyrus spool partitions and reports on their disk space usage. Cyr_df reads its configuration options out of the imapd.conf(5) file unless specified otherwise by -C. Options -C config-file Read configuration options…
* Name cyr_dbtool – manage Cyrus databases Synopsis cyr_dbtool [ -C config-file ] [ -n ] <db file> <db backend> <action> [ <key> ] [ <value> ] Description cyr_dbtool is used to manage a cyrusdb file. The usable actions are: show [<prefix>] get <key> set <key> <value> delete <key> consistency You may omit key or…
cyphesis_selinux – Security Enhanced Linux Policy for the cyphesis processes Description Security-Enhanced Linux secures the cyphesis processes via flexible mandatory access control. The cyphesis processes execute with the cyphesis_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
cyberjack — configuration and testing utility Synopsis cyberjack [COMMAND] [ARGUMENTS] Description cyberjack helps you in case of troubleshooting as well as for configuration of your CyberJack card reader. Using the "check" command, it will create 3 files: cyberjack-report.log with the test results cyberjack-hints.log with possible hints for you to solve the issue you may have…
cvtbatch – Convert Usenet batch files to INN format Synopsis cvtbatch [-w items] Description cvtbatch reads standard input as a sequence of lines, converts each line, and writes it to standard output. It is used to convert simple batch files that contain just the storage API token of an article to INN batch files that…
* Name cvt_cyrusdb – convert a database file between cyrus database formats Synopsis cvt_cyrusdb [ -C config-file ] <old-file> <old-fileformat> <new-file> <new-file-format> Description cvt_cyrusdb is used to convert a cyrusdb file between different database backends. Note that you should not attempt to use the same file for input and output. Running without any options will…
cvsbug – send problem report (PR) about CVS to a central support site Synopsis cvsbug [ site ] [ -f problem-report ] [ -t mail-address ] [ -P ] [ -L ] [ –request-id ] [ -v ] Description cvsbug is a tool used to submit problem reports (PRs) to a central support site. In…
cvs_selinux – Security Enhanced Linux Policy for the cvs processes Description Security-Enhanced Linux secures the cvs processes via flexible mandatory access control. The cvs processes execute with the cvs_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
cvs_script_selinux – Security Enhanced Linux Policy for the cvs_script processes Description Security-Enhanced Linux secures the cvs_script processes via flexible mandatory access control. The cvs_script processes execute with the cvs_script_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…