upssched.conf – Configuration for upssched timer program Description This file controls the operations of upssched(8), the timer-based helper program for upsmon(8). Configuration Directives CMDSCRIPT scriptname Required. This must be above any AT lines. This script is used to invoke commands when your timers are triggered. It receives a single argument which is the name of…
upssched.conf – Configuration for upssched timer program Description This file controls the operations of upssched(8), the timer-based helper program for upsmon(8). Configuration Directives CMDSCRIPT scriptname Required. This must be above any AT lines. This script is used to invoke commands when your timers are triggered. It receives a single argument which is the name of…
upsmon.conf – Configuration for Network UPS Tools upsmon Description This file’s primary job is to define the systems that upsmon(8) will monitor and to tell it how to shut down the system when necessary. It will contain passwords, so keep it secure. Ideally,only the upsmon process should be able to read it. Additionally, other optional…
upsmon.conf – Configuration for Network UPS Tools upsmon Description This file’s primary job is to define the systems that upsmon(8) will monitor and to tell it how to shut down the system when necessary. It will contain passwords, so keep it secure. Ideally, only the upsmon process should be able to read it. Additionally, other…
upsd.users – Administrative user definitions for NUT upsd Description Administrative commands such as setting variables and the instant commands are powerful, and access to them needs to be restricted. This file defines who may access them, and what is available. Each user gets its own section. The fields in that section set the parameters associated…
upsd.users – Administrative user definitions for NUT upsd Description Administrative commands such as setting variables and the instant commands are powerful, and access to them needs to be restricted. This file defines who may access them, and what is available. Each user gets its own section. The fields in that section set the parameters associated…
upsd.conf – Configuration for Network UPS Tools upsd Description upsd uses this file to control access to the server and set some other miscellaneous configuration values. This file contains details on access controls, so keep it secure. Ideally, only the upsd process should be able to read it. Configuration Directives "MAXAGE seconds" upsd usually allows…
ups.conf – UPS definitions for Network UPS Tools Description This file is read by the driver controller upsdrvctl, the UPS drivers that use the common core (see nutupsdrv(8)) and upsd(8). The file begins with global directives, and then each UPS has a section which contains a number of directives that set parameters for that UPS….
ups.conf – UPS definitions for Network UPS Tools Description This file is read by the driver controller upsdrvctl(8), the UPS drivers that use the common core (see nutupsdrv(8), and upsd(8)). The file begins with global directives, and then each UPS has a section which contains a number of directives that set parameters for that UPS….
uploader_event.conf – configuration file for libreport. Description This configuration file provides definitions for events which use reporter-uploader. By default the file contains definition for single report_Uploader event applicable for all problem types. report_Uploader event configuration file The configuration for report_Uploader event is read from /etc/libreport/events/report_Uploader.conf file if exists. The configuration file contains values for options…
uploader_event.conf – configuration file for libreport. Description This configuration file provides definitions for events which use reporter-uploader. By default the file contains definition for single report_Uploader event applicable for all problem types. report_Uploader event configuration file The configuration for report_Uploader event is read from /etc/libreport/events/report_Uploader.conf file if exists. The configuration file contains values for options…
upload.conf – configuration file for libreport. Description This configuration file provides default configuration for reporter-upload. See Also reporter-upload(1) Author • ABRT team
updmap.cfg – configuration of font mapping/inclusion for dvips and friends. Description The file updmap.cfg is the central font configuration file of a teTeX system and is read by updmap(1). It describes if and how fonts should be included (or not included) into PS-/PDF-files. This works for Outline (Postscript Type1) and Bitmap Fonts (Postscript Type3) mostly…
updmap.cfg – configuration of font mapping/inclusion for dvips and friends. Description The file updmap.cfg is the central font configuration file of a teTeX system and is read by updmap(1). It describes if and how fonts should be included (or not included) into PS-/PDF-files. This works for Outline (Postscript Type1) and Bitmap Fonts (Postscript Type3) mostly…
/etc/updatedb.conf – a configuration file for updatedb(8) Description /etc/updatedb.conf is a text file. Blank lines are ignored. A # character outside of a quoted string starts a comment extending until end of line. Other lines must be of the following form: VARIABLE = "VALUE" White space between tokens is ignored. VARIABLE is an alphanumeric string…
/etc/updatedb.conf – a configuration file for updatedb(8) Description /etc/updatedb.conf is a text file. Blank lines are ignored. A # character outside of a quoted string starts a comment extending until end of line. Other lines must be of the following form: VARIABLE = "VALUE" White space between tokens is ignored. VARIABLE is an alphanumeric string…
update-motd – dynamic MOTD generation Synopsis /etc/update-motd.d/* Description UNIX/Linux system adminstrators often communicate important information to console and remote users by maintaining text in the file /etc/motd, which is displayed by the pam_motd(8) module on interactive shell logins. Traditionally, this file is static text, typically installed by the distribution and only updated on release upgrades,…
update-initramfs.conf – configuration file for update-initramfs Description The configuration file allows one to disable the update action from update-initramfs. General Variables update_initramfs Default is yes for running the latest initramfs-tools hooks in the newest Linux image. Setting it to all updates any known initramfs. It is possible to set it to no for remote servers…
update-initramfs.conf – configuration file for update-initramfs Description The configuration file allows one to disable the update action from update-initramfs. General Variables update_initramfs Default is yes for running the latest initramfs-tools hooks in the newest Linux image. Setting it to all updates any known initramfs. It is possible to set it to no for remote servers…
up2date – Configuration file for Red Hat Satellite client programs. Description Red Hat Satellite client programs, such as rhn_check(8), use a common configuration file at /etc/sysconfig/rhn/up2date. Options enableProxy Use a HTTP Proxy. Can be either 0 (False) or 1 (True). serverURL Remote server URL debug Whether or not debugging is enabled. Can be either 0…