sane-coolscan2 – SANE backend for Nikon Coolscan film scanners Description The sane-coolscan2 library implements a SANE (Scanner Access Now Easy) backend that provides access to Nikon Coolscan film scanners. Some functions of this backend should be considered beta-quality software. Most functions have been stable for a long time, but of course new development can not…
sane-coolscan – SANE backend for Nikon film-scanners About This File This file is a short description of the coolscan backend for SANE. Description The sane-coolscan library implements a SANE backend that provides the interface to the following Nikon Coolscan Film scanners: Nikon LS20, LS30, LS1000, LS2000. Even though the backend has worked for a number…
sane-cardscan – SANE backend for Corex CardScan usb scanners Description The sane-cardscan library implements a SANE (Scanner Access Now Easy) backend which provides access to the Corex CardScan 800c & 600c small-format scanners. The backend supports only grayscale and color modes and media of (theoretically) infinite length. This backend may support other scanners. The best…
sane-canon_pp – SANE backend for Canon CanoScan Parallel Port flatbed scanners Description The sane-canon_pp library implements a SANE (Scanner Access Now Easy) backend that provides access to the following Canon flatbed scanners: CanoScan FB320P CanoScan FB620P CanoScan FB330P CanoScan FB630P CanoScan N340P CanoScan N640P CanoScan N640P ex No USB scanners are supported and there are…
sane-canon_lide70 – SANE backend for the Canon LiDE 70 and 600(F) USB flatbed scanners Description The canon_lide70 library implements a SANE (Scanner Access Now Easy) backend that provides access to the Canon Inc. CanoScan LiDE 70 and 600(F) flatbed scanners. The film unit of the LiDE 600F is not supported. Due to Canon’s unwillingness to…
sane-canon_dr – SANE backend for Canon DR-series scanners Description The sane-canon_dr library implements a SANE (Scanner Access Now Easy) backend which provides access to some Canon DR-series scanners. This document describes backend version 60, which shipped with SANE 1.0.32. Supported Hardware This version has only been tested with a few scanner models. Please see http://www.sane-project.org/sane-supported-devices.html…
sane-canon630u – SANE backend for the Canon 630u USB flatbed scanner Description The sane-canon630u library implements a SANE (Scanner Access Now Easy) backend that provides access to the following Canon flatbed scanners: CanoScan 630u CanoScan 636u Color scanning is supported at 75, 150, 300, and 600 dpi, and gamma and analog gain are adjustable. TESTERS…
sane-canon – SANE backend for Canon SCSI scanners Description The sane-canon library implements a SANE (Scanner Access Now Easy) backend that provides access to the following Canon flatbed and film scanners: CanoScan 300 CanoScan 600 CanoScan FB620S CanoScan FB1200S CanoScan FS2700F CanoScan FS2710S Parallel port and USB scanners are not supported by this backend; see…
sane-bh – SANE backend for Bell+Howell Copiscan II series document scanners Description The sane-bh library implements a SANE (Scanner Access Now Easy) backend that provides access to Bell+Howell Copiscan II series document scanners. The Copiscan II 6338 has been the primary scanner model used during development and testing, but since the programming interface for the…
sane-avision – SANE backend for Avision branded and Avision OEM (HP, Minolta, Mitsubishi, UMAX and possibly more) flatbed and film scanners. Description The sane-avision library implements a SANE (Scanner Access Now Easy) backend that provides access to various Avision scanners and the Avision OEM scanners labelled by HP, Minolta, Mitsubishi or Fujitsu. It is fully…
sane-as6e – SANE backend for using the Artec AS6E parallel port interface scanner. Description The sane-as6e library implements a SANE (Scanner Access Now Easy) backend that provides access to Artec AS6E flatbed scanner. It requires the as6edriver program in order to operate. The as6edriver program is not included with the SANE package. It can be…
sane-artec_eplus48u – SANE backend for the scanner Artec E+ 48U and re-badged models Description The sane-artec_eplus48u library implements a SANE (Scanner Access Now Easy) backend that provides access to several USB flatbed scanners using the GT6816 chipset like the Artec E+ 48U. These scanners have a contact image sensor (CIS). A complete list of supported…
sane-artec – SANE backend for Artec flatbed scanners Description The sane-artec library implements a SANE (Scanner Access Now Easy) backend that provides access to Artec/Ultima SCSI flatbed scanners. At present, the following scanners are known to work at least partially with this backend: * Artec A6000C * Artec A6000C PLUS * Artec ViewStation AT3 *…
sane-apple – SANE backend for Apple flatbed scanners Description The sane-apple library implements a SANE (Scanner Access Now Easy) backend that provides access to Apple flatbed scanners. At present, the following scanners are supported from this backend: ————— —– —————— —— AppleScanner 4bit 16 Shades of Gray OneScanner 8bit 256 Shades of Gray ColorOneScanner 24bit…
sane-airscan – SANE backend for AirScan (eSCL) and WSD scanners and MFP Description The sane-airscan is the universal backend for "driverless" document scanning. Currently it supports two protocols: 1. eSCL, also known as AirScan or AirPrint scan 2. WSD, also known as WS-Scan Configuration The sane-airscan loads its configuration files from the following places: 1….
sane-agfafocus – SANE backend for AGFA Focus flatbed scanners Description The sane-agfafocus library implements a SANE (Scanner Access Now Easy) backend that provides access to AGFA Focus flatbed scanners. At present, the following scanners are supported from this backend: AGFA Focus GS Scanner (6 bit gray scale) (untested) AGFA Focus Lineart Scanner (lineart) (untested) AGFA…
sane-abaton – SANE backend for Abaton flatbed scanners Description The sane-abaton library implements a SANE (Scanner Access Now Easy) backend that provides access to Abaton flatbed scanners. At present, only the Scan 300/GS (8bit, 256 levels of gray) is fully supported, due to the absence of programming information. The Scan 300/S (black and white) is…
sandbox.conf – user config file for the SELinux sandbox Description When running sandbox with the -C argument, it will be confined using control groups and a system administrator can specify how the sandbox is confined. Everything after "#" is ignored, as are empty lines. All arguments should be separated by and equals sign ("="). These…
sam – Sequence Alignment/Map file format Description Sequence Alignment/Map (SAM) format is TAB-delimited. Apart from the header lines, which are started with the `@’ symbol, each alignment line consists of: 1 QNAME Query template/pair NAME 2 FLAG bitwise FLAG 3 RNAME Reference sequence NAME 4 POS 1-based leftmost POSition/coordinate of clipped sequence 5 MAPQ MAPping…
safekeep.conf – Configuration file for ‘ safekeep(1)’ Synopsis This file resides in /etc/safekeep/, or optionally in ~/.safekeep/ for non-root users, from where it will be automatically picked up by safekeep(1). Description This configuration file holds safekeep global settings. The format of the file is a simple key-value pair similar to Java properties files: lines starting…