Linux Manuals session 1

NAME pilot-getrom – Retrieves the ROM image from your Palm device for use in debugging. SECTION pilot-link: Tools SYNOPSIS  pilot-getrom [-p|–port <port>] [–version] [-?|–help] [–usage] [-q|–quiet] [-t|–token  token] [-s|–sysinfo] [–ram] [–rom] [filename] DESCRIPTION  pilot-getrom is used to fetch the ROM from your Palm handheld for use in debugging Palm applications through the use of POSE, the Palm OS Emulator application. Note, because pilot-getrom uses the low-level RPC protocol to…

NAME pilot-getram – Retrieves the RAM image from your Palm device for use in debugging. SECTION pilot-link: Tools SYNOPSIS  pilot-getram [-p|–port <port>] [–version] [-q|–quiet] [-?|–help] [–usage] [-t|–token  token] [-s|–sysinfo] [–ram] [–rom] [filename] DESCRIPTION  pilot-getram is used to fetch the current RAM image from your Palm handheld for use in debugging.  pilot-getromtoken, pilot-getrom and pilot-getram are inter-related. All relevant code is implemented in pilot-getrom, and you can do pilot-getromtoken  –ram  filename to get the RAM dump if you…

NAME pilot-foto – Palm ‘Foto’ Image Installer/Remover/Fetcher/Converter SECTION pilot-link: Userland conduits SYNOPSIS  pilot-foto [-p|–port <port>] [–version] [-?|–help] [-q|–quiet] [–usage] [-d|–delete] [–delete-all] [-i|–install] [-l|–list] [-f|–fetch] [-F|–fetch-all] [-c|–convert] DESCRIPTION This is a palm conduit to fetch, install, or remove, Foto files from a Palm. It can also convert *.jpg.pdb files that have already been fetched from the Palm to jpeg files. Delete all, or named fotos from handheld. Install one,…

NAME pilot-foto-treo650 – Copies Treo "foto" databases and videos to the current directory SECTION pilot-link: Userland conduits SYNOPSIS  pilot-foto-treo650 [-p|–port <port>] [–version] [-?|–help] [-q|–quiet] [–usage] [-w|–write] DESCRIPTION Copies Treo "foto" databases to current directory and extracts the .jpg image files within them. OPTIONS pilot-foto-treo650 option                   -w, –write                Write the database data to disk Conduit Options                   -p, –port                   port                Use device file port…

NAME pilot-foto-treo600 – Copies Treo "foto" databases to current directory and extracts image files from within them. SECTION pilot-link: Userland conduits SYNOPSIS  pilot-foto-treo600 [-p|–port <port>] [–version] [-?|–help] [-q|–quiet] [–usage] [-w|–write] DESCRIPTION Copies Treo "foto" databases to current directory and extracts the .jpg image files within them. OPTIONS pilot-foto-treo600 options                   -w, –write                Write the database data to disk Conduit Options                   -p, –port                   port               …

NAME pilot-file – Dump application and header information from your local PRC/PDB files. SECTION pilot-link: Tools SYNOPSIS  pilot-file [-p|–port <port>] [–version] [-q|–quiet] [-?|–help] [–usage] [-H|–header] [-a|–appinfo] [-s|–sortinfo] [-l|–list] [-r|–record  STRING] [-f|–to-file] [-d|–dump] filename … DESCRIPTION  pilot-file is used to Dump application and header information from your local PRC/PDB files.  pilot-file does not connect to your Palm. OPTIONS pilot-file options                   -H, –header                Dump the header of the database(s)                   -a, –appinfo                Dump app_info segment of…

NAME pilot-dlpsh – An interactive Desktop Link Protocol (DLP) Shell for your Palm device. SECTION pilot-link: Tools SYNOPSIS  pilot-dlpsh [-p|–port <port>] [-c|–command  STRING] [-i|–interactive] [–version] OPTIONS pilot-dlpsh options                   -c,                   –command STRING                Execute cmd and exit immediately.                   -i, –interactive                Enter interactive mode Conduit Options                   -p,                    –port <                   port>                Use device file <port> to communicate with the Palm handheld. If this is…

NAME pilot-dedupe – Removes duplicate records from any Palm database. SECTION pilot-link: Userland conduits SYNOPSIS  pilot-dedupe [-p|–port <port>] [-q|–quiet] [–version] [-?|–help] [–usage] database … DESCRIPTION  pilot-dedupe is used to remove duplicate records from any Palm database. OPTIONS Conduit Options                   -p, –port lt;port>                Use device file <port> to communicate with the Palm handheld. If this is not specified, pilot-dedupe will look for the $PILOTPORT environment variable….

NAME pilot-debugsh – Simple debugging console for a Palm Handheld device [deprecated]. SECTION pilot-link: Tools SYNOPSIS  pilot-debugsh  /dev/tty<0..n>  DESCRIPTION  pilot-debugsh is a commandline interface to the Palm debug monitor. Use device file  /dev/tty<0..n>  to communicate with the Palm handheld. If this is not specified, pilot-debugsh will output a simple usage help message. SHELL COMMANDS               coldboot            Restart your Palm               reboot           …

NAME pilot-csd – Connection Service Daemon for Palm Devices SECTION pilot-link: Tools SYNOPSIS Required for accepting logons via NetSync(tm)  pilot-csd [-q|–quiet] -H  "localhost"  -a  127.0.0.1  -n  255.255.255.0  OPTIONS pilot-csd options                   –version                Display version of pilot-csd and exit.                   -q,                    –quiet                Suppress messages.                   -H, –hostname                The hostname used for verification                   -a, –address                name or IP address of the host                   -n, –netmask                The…

NAME pilot-clip – Get or Set the Palm Clipboard contents from STDOUT/STDIN. SECTION pilot-link: Userland conduits SYNOPSIS  pilot-clip [-p|–port <port>] [–version] [-q|–quiet] [-?|–help] [–usage] [-g|–get] [-s|–set] DESCRIPTION  pilot-clip is used to get or set the Palm Clipboard contents from STDOUT/STDIN. You must provide one of -g or -s. COMMANDS You must provide one of -g or -s.               -g, –get            Get the contents of the…

NAME pilot-addresses – Read and write address book databases to and from a Palm handheld. SECTION pilot-link: Userland conduits LOCATION ./src SYNOPSIS  pilot-addresses [-p|–port <port>] [–version] [-?|–help] [–usage] [-q|–quiet] [–delete-all] [-t|–delimiter  INT] [-d|–delete-category   category  ] [-c|–category  category] [-a|–augment] [-r|–read  file] [-w|–write   file  ] [-C|–human-readable] DESCRIPTION  pilot-addresses allows the user to read all entries from a Palm handheld such as those made by Palm, Handspring, Handera, TRGPro, Sony or other Palm handheld in the Palm Address Book application, write new entries into the database,…

NAME pigz, unpigz – compress or expand files SYNOPSIS pigz [ -cdfhikKlLmMnNqrRtz0..9,11 ] [ -b blocksize ] [ -p threads ] [ -S suffix ] [ name … ] unpigz [ -cfhikKlLmMnNqrRtz ] [ -b blocksize ] [ -p threads ] [ -S suffix ] [ name … ] DESCRIPTION Pigz compresses using threads to…

NAME pgrep, pkill, pidwait – look up, signal, or wait for processes based on name and other attributes SYNOPSIS pgrep [options] pattern pkill [options] pattern pidwait [options] pattern DESCRIPTION pgrep looks through the currently running processes and lists the process IDs which match the selection criteria to stdout. All the criteria have to match. For…

NAME pidstat – Report statistics for Linux tasks. SYNOPSIS pidstat [ -d ] [ -H ] [ -h ] [ -I ] [ -l ] [ -R ] [ -r ] [ -s ] [ -t ] [ -U [ username ] ] [ -u ] [ -V ] [ -v ] [ -w ]…

NAME pidof — find the process ID of a running program. SYNOPSIS pidof [-s] [-c] [-x] [-o omitpid[,omitpid..]] [-o omitpid[,omitpid..]..] program [program..] DESCRIPTION Pidof finds the process id’s (pids) of the named programs. It prints those id’s on the standard output. OPTIONS -s Single shot – this instructs the program to only return one pid….

NAME pidl – An IDL compiler written in Perl SYNOPSIS pidl –help pidl [–outputdir[=OUTNAME]] [–includedir DIR…] [–parse-idl-tree] [–dump-idl-tree] [–dump-ndr-tree] [–header[=OUTPUT]] [–python[=OUTPUT]] [–ndr-parser[=OUTPUT]] [–client] [–server] [–warn-compat] [–quiet] [–verbose] [–template] [–ws-parser[=OUTPUT]] [–diff] [–dump-idl] [–tdr-parser[=OUTPUT]] [–samba3-ndr-client[=OUTPUT]] [–samba3-ndr-server[=OUTPUT]] [–typelib=[OUTPUT]] [<idlfile>.idl]… DESCRIPTION pidl is an IDL compiler written in Perl that aims to be somewhat compatible with the midl compiler….

NAME pidgin – Instant Messaging client SYNOPSIS pidgin [options] DESCRIPTION pidgin is a graphical modular messaging client based on libpurple which is capable of connecting to AIM, MSN, Yahoo!, XMPP, ICQ, IRC, SILC, Novell GroupWise, Lotus Sametime, Zephyr, Gadu-Gadu, and QQ all at once. It has many common features found in other clients, as well…

NAME picosat – Satisfiability (SAT) solver with proof and core support SYNOPSIS picosat [OPTION]… [FILE] DESCRIPTION PicoSAT is a satisfiability (SAT) solver for boolean variables in boolean expressions. A SAT solver can determine if it is possible to find assignments to boolean variables that would make a given set of expressions true. If it’s satisfiable,…

NAME piconv — iconv(1), reinvented in perl SYNOPSIS piconv[-f from_encoding][-t to_encoding] [-p | –perlqq | –htmlcref | –xmlcref][-C N | -c][-D][-S scheme] [-s string | file…] piconv – l piconv – r encoding_alias piconv – h DESCRIPTION piconv is perl version of iconv, a character encoding converter widely available for various Unixen today. This script…