Section 1: user commands and tools
NAME abrt-backtrace – a backtrace analyzer for abrt SYNOPSIS abrt-backtrace [option]… [FILE] DESCRIPTION abrt-backtrace is a command line tool that analyzes backtraces produced by GDB and provides their textual representation useful for crash duplication detection. By default, abrt-backtrace prints the backtrace tree created by parsing the input file. OPTIONS Basic startup options -V, –version Displays…
NAME abrt-auto-reporting – Get or modify the auto reporting option values SYNOPSIS abrt-auto-reporting [-v] [ enabled | yes | 1 | on | disabled | no | 0 | off ] DESCRIPTION Reads the configuration from abrt.conf and saves the changes to the same file. The changes will take effect immediately without necessity to restart…
NAME abrt-applet – Applet which notifies user when new problems are detected by ABRT SYNOPSIS abrt-applet [-v] DESCRIPTION This tool listens on org.freedesktop.problems D-Bus bus and waits for Crash signal. When the tool detects the signal, it notifies user about new problem over a desktop specific notification pop-up. At start-up this tool checks for new…
NAME abrt-action-trim-files – Deletes old problem directories or files in specified directories until they are smaller than specified size. SYNOPSIS abrt-action-trim-files [-v] [-d SIZE:DIR]… [-f SIZE:DIR]… [-p DIR] [FILE]… OPTIONS -v Be more verbose. Can be given multiple times. -d SIZE:DIR Delete problem directories in DIR. SIZE can be suffixed by k,m,g,t to specify kilo,mega,giga,terabytes….
NAME abrt-action-save-package-data – Query package database and save package and component name. SYNOPSIS abrt-action-save-package-data [-v] [-c CONFFILE] -d DIR DESCRIPTION The tool reads problem directory DIR. It analyzes contents of analyzer, executable, cmdline and remote elements, checks database of installed packages, and creates new elements package and component. This data is usually necessary if the…
NAME abrt-action-save-kernel-data – Creates uReport mandatory files for kernel oopses. SYNOPSIS abrt-action-save-kernel-data DESCRIPTION The tool reads problem directory DIR. It analyzes contents of kernel element, checks database of installed packages, and creates new elements pkg_name, pkg_arch, pkg_version, pkg_release. These files are required by reporter-ureporter (mandatory in uReport). Integration with ABRT events This tool can be…
NAME abrt-action-perform-ccpp-analysis – Allows users to select acceptable way of core dump analysis SYNOPSIS abrt-action-perform-ccpp-analysis [-h] [-d PROBLEM_DIR] DESCRIPTION This tool allows user to select between local and remote core dump analysis. The local analysis may require to download huge amount of data but is completely safe. On the contrary the remote analysis only needs…
NAME abrt-action-notify – Announces a new occurrence of problem via all accessible channels SYNOPSIS abrt-action-notify [-h] -d PROBLEM_DIR [-v] [-a] [-e AUTOREPORTING_EVENT] DESCRIPTION The current implementation emits a D-Bus signal on System bus in path /org/freedesktop/problems of org.freedesktop.problems interface for Crash member. Integration with ABRT events abrt-action-notify is used to notify new problems and consecutive…
NAME abrt-action-list-dsos – Prints out DSO from mapped memory regions. SYNOPSIS abrt-action-list-dsos [-o OUTFILE] -m PROC_PID_MAP_FILE DESCRIPTION The tool reads a file containing the mapped memory regions. Output is printed to stdout or file. Output format: %p %n %v %i where %p path to library or binary file, which is mapped in memory region %n…
NAME abrt-action-install-debuginfo – Install debuginfos for build-ids SYNOPSIS abrt-action-install-debuginfo [-vy] [–ids=BUILD_IDS_FILE] [–tmpdir=TMPDIR] [–cache=CACHEDIR[:DEBUGINFODIR1:DEBUGINFODIR2…]] [–size_mb=SIZE] [-e PATH] DESCRIPTION Installs debuginfos for all build-ids listed in BUILD_IDS_FILE to CACHEDIR, using TMPDIR as temporary staging area. Old files in CACHEDIR are deleted until it is smaller than SIZE. OPTIONS -v Be more verbose. Can be given multiple times….
NAME abrt-action-generate-core-backtrace – Generates coredump-level backtrace SYNOPSIS abrt-action-generate-core-backtrace [-v] [-r] [-d DIR] DESCRIPTION This tool uses coredump from the file coredump and binary at the path stored in file executable in the problem directory to generate coredump-level backtrace. Coredump-level backtrace resembles ordinary backtrace in that it contains information about call frames present on the stack…
NAME abrt-action-generate-backtrace – Analyzes coredump, generates and saves backtrace. SYNOPSIS abrt-action-generate-backtrace [-v] [-d DIR] [-i DIR1[:DIR2]…] [-t NUM] DESCRIPTION This tool runs gdb(1) on a file named coredump in problem directory DIR. gdb(1) generates backtrace and other diagnostic information about the state of the application at the moment when coredump was generated. Then the tool…
NAME abrt-action-analyze-xorg – Calculate and save UUID and duplicate hash for a problem data directory DIR with Xorg backtrace. SYNOPSIS abrt-action-analyze-xorg [-v] [-d DIR] DESCRIPTION The tool reads the file named Xorg.0.log and checks if any black listed module was loaded. If so, not-reportable file is created with an appropriate explanation text. If no black…
NAME abrt-action-analyze-vulnerability – Provides assessment of potential exploitability of crash SYNOPSIS abrt-action-analyze-vulnerability DESCRIPTION This tool expects that file named coredump is placed in the current directory and runs abrt-gdb-exploitable gdb plugin on that file. The result of vulnerability analysis is saved in exploitable file in the current directory. This tool requires both gdb and eu-readelf…
NAME abrt-action-analyze-vmcore – Extracts the oops message from the kernel core and install the kernel debuginfo if needed SYNOPSIS abrt-action-analyze-vmcore [-v] [-d PROBLEM_DIR] [–tmpdir=TMPDIR] [–cache=DIR1[:DIR2]] DESCRIPTION The tool reads the file named vmcore from a problem data directory, processes it and the oops message from it. Then it saves this data as new element backtrace….
NAME abrt-action-analyze-python – Calculate and save UUID and duplicate hash for a problem data directory DIR with Python crash data. SYNOPSIS abrt-action-analyze-python [-v] [-d DIR] DESCRIPTION The tool reads the file named backtrace from a problem data directory, parses it as a Python exception and generates a duplication hash and a universally unique identifier (UUID)….
NAME abrt-action-analyze-oops – Calculate and save UUID and duplicate hash for a problem data directory DIR with kernel oops. SYNOPSIS abrt-action-analyze-oops [-v] [-d DIR] DESCRIPTION The tool reads the file named backtrace from a problem data directory, parses it as a kernel oops record and generates a duplication hash and a universally unique identifier (UUID)….
NAME abrt-action-analyze-java – Calculate and save UUID & DUPHASH and determine the level of usability for reporting of a Java stack trace. SYNOPSIS abrt-action-analyze-java [-v] [-d DIR] [-o] [-f FILE] DESCRIPTION The tool reads the file named backtrace from a problem data directory, processes it and generates a universally unique identifier (UUID). Then it saves…
NAME abrt-action-analyze-core – Extracts builds from a core dump SYNOPSIS abrt-action-analyze-core [-v] [-o OUTFILE] -c COREFILE DESCRIPTION The tool reads a core dump and extracts build ids of loaded modules and prints the list to the standard output if the OUTFILE file is not configured. OPTIONS -c COREFILE Path to a core dump. -v Be…
NAME abrt-action-analyze-ccpp-local – Generates backtrace and search for duplicates SYNOPSIS abrt-action-analyze-ccpp-local [–without-di][–without-bz][–without-bodhi] DESCRIPTION This tool downloads debuginfo and generates a backtrace for coredump in the problem directory, also checks for existing duplicates in bugzilla and possible updates related to the detected crash Integration with ABRT events abrt-action-analyze-ccpp-local is used in the analyze step when processing…