Section 1: user commands and tools
yum-ovl – Performs an initial copy-up of yum(8) package database. Options-d debug-level If debug level is 2 and more, print out the number of files copied up from the lower layer DescriptionOpening a file on OverlayFS in read-only mode causes the file from lower layer to be opened, then later on, if the same file…
yum list data plugin Synopsisyum [options] [command] [package …] DescriptionThis plugin extends yum for some commands that give aggregate package data based on lists of packages added yum commands are: * list-vendors * info-vendors * list-rpm-groups * info-rpm-groups * list-packagers * info-packagers * list-licenses * info-licenses * list-arches * info-arches * list-committers * info-committers *…
yum-groups-manager – create and edit yum’s group metadata Synopsisyum-groups-manager [options] [packages] Descriptionyum-groups-manager is used to create or edit a group metadata file for a yum repository. This is often much easier than writing/editing the XML by hand. The yum-groups-manager can load an entire file of groups metadata and either create a new group or edit…
yum-fs-snapshot SynopsisThe yum-fs-snapshot package Descriptionyum-fs-snapshot(1) is a Yum plugin for taking snapshots of your filesystems before running a yum transaction. By default it will take a snapshot of any filesystem that can be snapshotted, which currently is limited to BTRFS filesystems. However, all filesystems built on LVM logical volumes may be snapshotted at the block…
yum filter data plugin Synopsisyum [options] [command] [package …] DescriptionThis plugin extends yum with some options, currently just for "update" and "list update" type commands, to allow filters to be placed on which packages should be used based on the data in those packages. Note that due to some of the data being unknown, and…
yum-debug-restore – replay Yum transactions captured in a debug-dump file Synopsisyum-debug-restore Descriptionyum-debug-restore is a program which takes a gzipped file created by yum-debug-dump and acts on the information about installed packages contained within. General Options–output Output the commands that would be run to stdout. –shell=<file> Output the commands that would be run to a file….
yum-debug-dump – write system RPM configuration to a debug-dump file Synopsisyum-debug-dump Descriptionyum-debug-dump is a program which creates a gzipped file containing a lot of information useful to developers trying to debug a problem. By default it will output a file to the current working directory named yum_debug_dump-<hostname>-<time>.txt.gz. This file contains no private information but does…
yum-config-manager – manage yum configuration options and yum repositories Synopsisyum-config-manager [options] [section …] Descriptionyum-config-manager is a program that can manage main yum configuration options, toggle which repositories are enabled or disabled, and add new repositories. Unless –add-repo is used, the program will output the current configuration of the selected sections, and optionally save it back…
yum-changelog SynopsisThe yum-changelog package Descriptionyum-changelog(1) is a Yum plugin for viewing package changelogs before/after updating. yum will invoke yum-changelog(1) plugin if the –changelog option or the changelog command is used with yum. Options–changelog Show changelog delta of updated packagesCommandschangelog Show changelog data of packages listed (same format as the list command). The first argument is…
yum-builddep – install missing dependencies for building an RPM package Synopsisyum-builddep package yum-builddep /path/to/local/package.src.rpm yum-builddep /path/to/local/package.spec Descriptionyum-builddep is a program which installs the RPMs needed to build the specified package. The source RPM for the specified package must be available in a Yum repository (which will be automatically enabled, if it is disabled) or it…
yum aliases plugin Synopsisyum [options] alias DescriptionThis plugin changes other commands in yum, much like the alias command in bash. There are a couple of notable differences from shell style aliases though. The alias command has three forms: * alias * alias command * alias command result The first form lists all current aliases with…
yubikey-personalization-gui – personalize YubiKey OTP tokens Synopsisyubikey-personalization-gui DescriptionGraphical interface for configuration fo YubiKey OTP tokens. Help is available from within the program. BugsReport yubikey-personalization-gui bugs in the issue tracker <URL: https://github.com/Yubico/yubikey-personalization-gui/issues > See AlsoYubiKeys can be obtained from Yubico <URL: http://www.yubico.com/ >.
yubico-piv-tool – Yubico PIV tool Synopsisyubico-piv-tool [,OPTIONS/]… Descriptionyubico-piv-tool 1.1.1 -h, –help Print help and exit –full-help Print help, including hidden options, and exit -V, –version Print version and exit -v, –verbose[=,INT/] Print more information (default=`0′) -r, –reader=,STRING/ Only use a matching reader (default=`Yubikey’) -k, –key[=,STRING/] Authentication key to use (default=`010203040506070801020304050607080102030405060708′) -a, –action=,ENUM/ Action to take…
ypwhich – return name of NIS server or map master Synopsisypwhich [ -d domain ] [ -Vn ] [ hostname ] ypwhich [ -d domain ] [ -t ] -m [ mname ] ypwhich -x Descriptionypwhich returns the name of the NIS server that supplies the NIS services to a NIS client, or which is…
yppasswd, ypchfn, ypchsh – change your password in the NIS database Synopsisyppasswd [-f] [-l] [-p] [user] ypchfn [user] ypchsh [user] DescriptionIn the old days, the standard passwd(1), chfn(1) and chsh(1) tools could not be used under Linux to change the users NIS password, shell and GECOS information. For changing the NIS information, they were replaced…
ypmatch – print the values of one or more keys from a NIS map Synopsisypmatch [ -kt ] [ -d domain ] key … mapname ypmatch -x Descriptionypmatch prints the values of one or more keys from the NIS database specified by mapname, which may be a map name or a map nickname. Options-d domain…
hostname – show or set the system’s host name domainname – show or set the system’s NIS/YP domain name ypdomainname – show or set the system’s NIS/YP domain name nisdomainname – show or set the system’s NIS/YP domain name dnsdomainname – show the system’s DNS domain name Synopsishostname [-a|–alias] [-d|–domain] [-f|–fqdn|–long] [-A|–all-fqdns] [-i|–ip-address] [-I|–all-ip-addresses] [-s|–short]…
yppasswd, ypchfn, ypchsh – change your password in the NIS database Synopsisyppasswd [-f] [-l] [-p] [user] ypchfn [user] ypchsh [user] DescriptionIn the old days, the standard passwd(1), chfn(1) and chsh(1) tools could not be used under Linux to change the users NIS password, shell and GECOS information. For changing the NIS information, they were replaced…
yppasswd, ypchfn, ypchsh – change your password in the NIS database Synopsisyppasswd [-f] [-l] [-p] [user] ypchfn [user] ypchsh [user] DescriptionIn the old days, the standard passwd(1), chfn(1) and chsh(1) tools could not be used under Linux to change the users NIS password, shell and GECOS information. For changing the NIS information, they were replaced…
ypcat – print values of all keys in a NIS database Synopsisypcat [ -kt ] [ -d domain ] [ -h hostname ] mapname ypcat -x Descriptionypcat prints the values of all keys from the NIS database specified by mapname, which may be a map name or a map nickname. Options-d domain Specify a domain…