Section 5: file formats
sane-sp15c – SANE backend for Fujitsu ScanPartner 15C flatbed scanner Description The sane-sp15c library implements a SANE (Scanner Access Now Easy) backend which provides access to the Fujitsu flatbed scanners. At present, the following scanner is known to work with these backend: Vendor: Model: Rev: ——– —————- —– FCPA ScanPartner 15C 1.01 The ScanPartner 15C…
sane-snapscan – SANE backend for AGFA SnapScan flatbed scanners Description The sane-snapscan library implements a SANE (Scanner Access Now Easy) backend that provides access to AGFA SnapScan flatbed scanners. At present, the following scanners are supported from this backend: AGFA SnapScan 300, 310, 600, and 1236s, 1236u, 1212u, e20, e25, e40, e50, e60, Vuego 310s,…
sane-sm3840 – SANE backend for Microtek scanners with SCAN08 USB chip Description The sane-sm3840 library implements a SANE (Scanner Access Now Easy) backend that provides access to some Microtek scanners with the SCAN08 USB chip. There exist backends for Microtek scanners with SCSI command set. Refer to sane-microtek(5) and sane-microtek2(5) for details. There also exists…
sane-sm3600 – SANE backend for Microtek scanners with M011 USB chip Description The sane-sm3600 library implements a SANE (Scanner Access Now Easy) backend that provides access to some Microtek scanners with the Toshiba M011 custom USB chip. This backend should be considered alpha. There are also backends for Microtek scanners with SCSI command set. Refer…
sane-sharp – SANE backend for SHARP scanners Description The sane-sharp library implements a SANE (Scanner Access Now Easy) backend that provides access to Sharp SCSI scanners. This backend should be considered beta-quality software! In the current state it is known to work with JX-610 and JX-250 scanners. It is prepared for usage with the JX-330…
sane-scsi – SCSI adapter tips for scanners Description This manual page contains various operating-system specific tips and tricks on how to get scanners with a SCSI interface working. General Info For scanners with a SCSI interface, it may be necessary to edit the appropriate backend configuration file before using SANE for the first time. For…
sane-sceptre – SANE backend for SCEPTRE scanners Description The sane-sceptre library implements a SANE (Scanner Access Now Easy) backend that provides access to Sceptre flatbed scanners. This backend should be considered beta-quality software! Please report any strange behavior to the maintainer of the backend or to the SANE mailing list. At present, only one scanner…
sane-s9036 – SANE backend for Siemens 9036 flatbed scanners Description The sane-s9036 library implements a SANE (Scanner Access Now Easy) backend that provides access to Siemens 9036 flatbed scanners. Device Names This backend expects device names of the form: special Where special is the path-name for the special device that corresponds to a SCSI scanner….
sane-rts8891 – SANE backend for rts8891 based scanners Description The sane-rts8891 library implements a SANE (Scanner Access Now Easy) backend that provides access to scanners based on the rts8891 ASIC. The scanners that work with this backend are: Vendor Model status ———————- ———– Umax Astra 4400 untested Umax Astra 4450 untested HP scanjet 4000c good…
sane-ricoh2 – SANE backend for Ricoh flatbed scanners Description The sane-ricoh2 library implements a SANE (Scanner Access Now Easy) backend that provides access to the following Ricoh flatbed scanners: SG-3110SFNw SG-3100SNw SP-100SU SP-111SU (SP-112SU) Files /usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.a The static library implementing this backend. /usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so The shared library implementing this backend (present on systems that support dynamic…
sane-ricoh – SANE backend for Ricoh flatbed scanners Description The sane-ricoh library implements a SANE (Scanner Access Now Easy) backend that provides access to the following Ricoh flatbed scanners: IS50 IS60 Device Names This backend expects device names of the form: special Where special is the path-name for the special device that corresponds to a…
sane-qcam – SANE backend for Connectix QuickCam cameras Description The sane-qcam library implements a SANE (Scanner Access Now Easy) backend that provides access Connectix QuickCam cameras. Device Names This backend expects device names of the form: port where port is the I/O port address at which the device resides. This address is normally specified in…
sane-pnm – SANE PNM image reader pseudo-backend Description The sane-pnm library implements a SANE (Scanner Access Now Easy) backend that provides access to PNM (Portable aNyMap files, which covers PBM bitmap files, PGM grayscale files, and PPM pixmap files). The purpose of this backend is primarily to aid in debugging of SANE frontends. It also…
sane-plustek_pp – SANE backend for Plustek parallel port flatbed scanners Description The sane-plustek_pp library implements a SANE (Scanner Access Now Easy) backend that provides access to Plustek ASIC 9600[1/3] and P9800[1/3] based parallel port flatbed scanners. The access of the scanner is either done directly by the backend or via kernel module, called pt_drv which…
sane-plustek – SANE backend for LM983[1/2/3] based USB flatbed scanners Description The sane-plustek library implements a SANE (Scanner Access Now Easy) backend that provides access to USB flatbed scanners based on National Semiconductor Merlin chipsets (LM9831, 9832 and 9833). If you’re looking for parallel-port support for Plustek scanner please refer to the sane-plustek_pp(5) backend. Supported…
sane-pixma – SANE backend for Canon Multi-Function Printers and CanoScan Scanners Description The sane-pixma library implements a SANE (Scanner Access Now Easy) backend that provides access to Canon PIXMA / i-SENSYS / imageCLASS / imageRUNNER multi-function devices (All-in-one printers) and the Canon CanoScan Flatbed/TPU scanners. The backend implements both the USB interface and network interface…
sane-pint – SANE backend for scanners that use the PINT device driver Description The sane-pint library implements a SANE (Scanner Access Now Easy) backend that provides generic access to hand-held and flatbed scanners using the PINT (PINT Is Not Twain) device driver. The PINT driver is being actively developed on the OpenBSD platform, and has…
sane-pieusb – SANE backend for USB-connected PIE PowerSlide and Reflecta DigitDia/CrystalScan/ProScan slide scanners Description The sane-pieusb library implements a SANE (Scanner Access Now Easy) backend that provides access to USB-connected PIE and Reflecta slide scanners. At present, the following scanners should work with this backend: Model: Status ————————- —— PIE PowerSlide 3600 Untested PIE PowerSlide…
sane-pie – SANE backend for PIE, Devcom and AdLib SCSI flatbed scanners Description The sane-pie library implements a SANE (Scanner Access Now Easy) backend that provides access to PIE, Devcom and AdLib SCSI flatbed scanners. At present, the following scanners should work with this backend: Model: Status ———————- —— Devcom 9636PRO OK Devcom 9636S Untested…
sane-p5 – SANE backend for the Primax PagePartner Description The sane-p5 library implements a SANE (Scanner Access Now Easy) backend that provides access to the Primax PagePartner parallel port sheet fed scanner. This backend handles 100, 150, 200, 300 and 600 dpi scan resolutions, in color and gray modes. The 600 dpi is actually 300×600…