Section 8: administration and privileged commands
loadndisdriver – load ndis driver (wrapper) Synopsis loadndisdriver [options] Description This manual page documents briefly the loadndisdriver command. loadndisdriver is a wrapper for the version-specific loadndisdriver-X.X programs (where -X.X is the version number of the utils; ie, loadndisdriver-1.8). It simply figures out which version should be called, and calls the appropriate binary. Each version’s man…
loadndisdriver – Userspace ndis driver loader for the ndiswrapper Linux kernel module Synopsis loadndisdriver Description loadndisdriver is a support program for the ndiswrapper Linux kernel module. The ndiswrapper kernel module uses it to load ndis drivers that have been installed via the ndiswrapper(8) tool. loadndisdriver should not be used directly, only the kernel module should…
loadkeys_selinux – Security Enhanced Linux Policy for the loadkeys processes Description Security-Enhanced Linux secures the loadkeys processes via flexible mandatory access control. The loadkeys processes execute with the loadkeys_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
load_selinux – Security Enhanced Linux Policy for the load processes Description Security-Enhanced Linux secures the load processes via flexible mandatory access control. Booleans SELinux policy is customizable based on least access required. load policy is extremely flexible and has several booleans that allow you to manipulate the policy and run load with the tightest access…
load_policy_selinux – Security Enhanced Linux Policy for the load_policy processes Description Security-Enhanced Linux secures the load_policy processes via flexible mandatory access control. The load_policy processes execute with the load_policy_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
load_policy – load a new SELinux policy into the kernel Synopsis load_policy [-qi] Description load_policy loads the installed policy file into the kernel. The existing policy boolean values are automatically preserved across policy reloads rather than being reset to the default values in the policy file. Options -q suppress warning messages. -i initial policy load….
lnstat – unified linux network statistics Synopsis lnstat [options] Description This manual page documents briefly the lnstat command. lnstat is a generalized and more feature-complete replacement for the old rtstat program. It is commonly used to periodically print a selection of statistical values exported by the kernel. In addition to routing cache statistics, it supports…
* Name lmtpd – LMTP server process Synopsis lmtpd [ -C config-file ] [ -U uses ] [ -T timeout ] [ -D ] [ -a ] Description Lmtpd is an LMTP server used to deliver mail to the IMAP mailstore. It accepts commands on its standard input and responds on its standard output. It…
smtp – Postfix SMTP+LMTP client Synopsis smtp [generic Postfix daemon options] Description The Postfix SMTP+LMTP client implements the SMTP and LMTP mail delivery protocols. It processes message delivery requests from the queue manager. Each request specifies a queue file, a sender address, a domain or host to deliver to, and recipient information. This program expects…
lldptool – manage the LLDP settings and status of lldpad Synopsis lldptool <command> [options] [argument] Description lldptool is used to query and configure lldpad. It connects to the client interface of lldpad to perform these operations. lldptool will operate in interactive mode if it is executed without a command. In interactive mode, lldptool will also…
vdp – Show / manipulate VDP TLV configuration Synopsis lldptool -t -i ethx -V vdp -c enableTx lldptool -T -i ethx -V vdp -c enableTx=[yes|no] lldptool -t -i ethx -V vdp -c mode lldptool -T -i ethx -V vdp -c mode=<mode>,<mgrid>,<typeid>,<typeidversion>,<instanceid>,<mac>,<vlan> lldptool -t -i ethx -V vdp -c role lldptool -T -i ethx -V vdp…
PFC – Show / manipulate PFC TLV configuration Synopsis lldptool -t -i ethx -V PFC [ -c [ enableTx | willing | enabled | delay ] ] lldptool -T -i ethx -V PFC <CONFIG_ARG=value …> CONFIG_ARG:= enableTx=<yes|no> willing=<yes|no|0|1> enabled=<none|[0..7],[0..7],…> delay=<integer value> Description The PFC TLV is used to display and set current PFC TLV…
LLDP-MED – Show / manipulate MED TLV configurations Synopsis lldptool -t -i ethx -V [ TLV_TYPE ] enableTx lldptool -T -i ethx -V [ TLV_TYPE ] enableTx = { yes | no } lldptool -T -i ethx -V LLDP-MED devtype = { class1 | class2 | class3 | none } lldptool -t -i ethx -V…
evb22 – Show / manipulate EVB IEEE 802.1 Ratified Standard TLV configuration Synopsis lldptool -t -i ethx -g ncb -V evb lldptool -t -i ethx -g ncb -V evb -c lldptool -t -i ethx -g ncb -V evb -c enabletx lldptool -T -i ethx -g ncb -V evb -c enabletx=[yes|no] lldptool -t -i ethx -g…
evb – Show / manipulate EVB TLV configuration Synopsis lldptool -t -g ncb -i ethx -V evbCfg -c enableTx lldptool -T -g ncb -i ethx -V evbCfg -c enableTx=[yes|no] lldptool -t -g ncb -i ethx -V evbCfg -c fmode lldptool -T -g ncb -i ethx -V evbCfg -c fmode=[bridge|reflectiverelay] lldptool -t -g ncb -i ethx…
ETS-{CFG|REC} – Show / manipulate ETS TLV configuration Synopsis lldptool -t -i ethx -V ETS-CFG <-c CONFIG_ARG …> CONFIG_ARG := { enableTx | willing | tsa | up2tc | numtcs | tcbw } CONFIG_ARG=value … CONFIG_ARG := enableTx = {yes|no} | willing = {yes|no} | tsa = tc:{ets|strict|vendor},… | up2tc = priority:tc,… | tcbw…
DCBX – Show / manipulate DCBX configuration Synopsis lldptool -t -i ethx -V IEEE-DCBX -c [mode] lldptool -T -i ethx -V IEEE-DCBX mode=reset lldptool -t -i ethx -V <CIN-DCBX|CEE-DCBX> -c [enableTx] lldptool -T -i ethx -V <CIN-DCBX|CEE-DCBX> enableTx=<yes|no> Description – Dcbx Mode lldpad supports the following versions of the DCB capabilities exchange (DCBX) protocol: CIN…
APP – Show / manipulate APP TLV configuration Synopsis lldptool -t -i ethx -V APP [-c app] lldptool -T -i ethx -V APP [-d] app=prio,sel,pid Description The APP TLV is an informational TLV and will advertise the current configured application table. If the peer APP TLV and a local APP TLV match the same selector…
lldpad_selinux – Security Enhanced Linux Policy for the lldpad processes Description Security-Enhanced Linux secures the lldpad processes via flexible mandatory access control. The lldpad processes execute with the lldpad_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
lldpad – Link Layer Discovery Protocol (LLDP) agent daemon Synopsis lldpad [-h] [-v] [-V level] [-d] [-k] [-p] [-s] [-t] [-f filename] Description Executes the LLDP protocol for supported network interfaces. The list of TLVs currently supported are: – IEEE 802.1AB Mandatory TLVs – IEEE 802.1AB Basic Management TLVs – IEEE 802.3 Organizationally Specific TLVs…