Section 8: administration and privileged commands
inadyn – a client for open DNS servers. Synopsis inadyn [-h | –help] [-u | –username username ] [-p | — password password ] [-a | –alias[,hash] alias,hash [-a | –alias[,hash] another_alias,the_other_hash … ]] [–input_file path/name ] [–ip_server_name server[:port] url ] [–dyndns_server_name[:port] server[:port] ] [–dyndns_system service ] [–proxy_server[:port] proxy[:port] ] [–update_period ms ] [–update_period_sec sec…
tftpd – Trivial File Transfer Protocol server Synopsis in.tftpd [options…] directory… Description tftpd is a server for the Trivial File Transfer Protocol. The TFTP protocol is extensively used to support remote booting of diskless devices. The server is normally started by inetd, but can also run standalone. Options –ipv4, -4 Connect with IPv4 only, even…
telnetd – DARPA telnet protocol server Synopsis /usr/sbin/in.telnetd [-ihn[-a authmode ] ] [-D debugmode ] [-L loginprg ] [-S tos ] [-X authtype ] [-edebug ] [-debug port ] Description The telnetd program is a server which supports the DARPA telnet interactive communication protocol. Telnetd is normally invoked by the internet server (see inetd(8)) for…
rshd – remote shell server Synopsis rshd [-ahlnL ] Description The rshd server is the server for the rcmd(3) routine and, consequently, for the rsh(1) program. The server provides remote execution facilities with authentication based on privileged port numbers from trusted hosts. The rshd server listens for service requests at the port indicated in the…
rlogind – remote login server Synopsis rlogind [-ahlLn Description ] Rlogind is the server for the rlogin(1) program. The server provides a remote login facility with authentication based on privileged port numbers from trusted hosts. Options supported by rlogind -a Ask hostname for verification. -h Permit use of superuser “.rhosts ” files. -l Prevent any…
rexecd – remote execution server Synopsis rexecd [ -D ] Options Rexec accepts one option: -D Disable reverse DNS look up and in the log will be used client IP addresses. Description Rexecd is the server for the rexec(3) routine. The server provides remote execution facilities with authentication based on user names and passwords. Rexecd…
fingerd – remote user information server Synopsis fingerd [-wulf ] [-pL path ] [-t timeout ] Description Fingerd is a simple daemon based on RFC1196 that provides an interface to the “finger” program at most network sites. The program is supposed to return a friendly, human-oriented status report on either the system at the moment…
talkd – remote user communication server Synopsis talkd [-dp ] Description Talkd is the server that notifies a user that someone else wants to initiate a conversation. It acts a repository of invitations, responding to requests by clients wishing to rendezvous to hold a conversation. In normal operation, a client, the caller, initiates a rendezvous…
in.identtestd – a small daemon that can be used to test Ident servers Synopsis in.identtestd Description in.identtestd is a small daemon (to be started from inetd) that does an ident lookup on you if you telnet into it. Can be used to verify that your Ident server is working correctly. The source code can be…
fingerd – remote user information server Synopsis fingerd [-wulf ] [-pL path ] [-t timeout ] Description Fingerd is a simple daemon based on RFC1196 that provides an interface to the “finger” program at most network sites. The program is supposed to return a friendly, human-oriented status report on either the system at the moment…
imontty – display status of all ISDN lines Synopsis imontty [ phonebook ] Description imontty displays the status of all ISDN lines. No options are supported. Read access to /dev/isdninfo is required. It is possible to supply the name of a phonebook file. The phonebook file has the following format: number<tab>name for number The number…
imon – watch ISDN activities Synopsis imon [ -q] [-p phonebook] Description imon is a ncurses based utility for watching ISDN activity. Options -q If this option is given, the facility of terminatig the program by pressing ‘Q’ is disabled and the signals SIGHUP and SIGINT are caught. This option is intended for starting imon…
imgbase – tool to manage writeable filesystems on read-only base images Synopsis imgbase [OPTION…] [<COMMAND> [OPTION…]] Description imgbase provides a specific management method to derive writeable filesystem layers from read-only base images. It also takes care that the layer which shall be used can be selected at boot time. Warning imgbase is a WIP. That…
im-config – set up input method framework configuration Synopsis im-config [OPTION] Options -a List all; force to list all possible input method frameworks in menu or STDOUT even if any associated packages are not installed on the system. -c Use console dialogue. -x Use X dialogue with zenity. -s No action; perform a simulation of…
ilmid – Integrated Local Management Interface Daemon Synopsis ilmid [ -b ] [ -d ] [ -v ] [ -l logfile ] [ -x ] [ -q qos ] [ -i local_ip ] [ -u uni ] <interface> Parameters -b Puts the process in the background. -d Turn on debugging output. -v Verbose. -l logfile Set the location of the…
ipmiutil_lan – show and configure IPMI LAN parameters, users, and set up a PEF rule to send BMC LAN Alerts for OS Critical Stop log events Synopsis ipmiutil lan [-abcdefghijklmnopq#rstuvwxyzBDQK -i eth1 ] [-I ipadr -M macadr -S subnet -B baud_sol ] [-G gwyip -H gwymac -L lan_channel_num ] [-A alertip -X alertmac -C community ] [-u user_to_set…
ikiwiki-mass-rebuild – rebuild all ikiwiki wikis on a system Synopsis ikiwiki-mass-rebuild Description ikiwiki-mass-rebuild can be used to force a rebuild of all the wikis on a system. You will need to list the setup files for the wikis it should build in the file /etc/ikiwiki/wikilist, which has the format: user /path/to/ikiwiki.setup It’s also possible to…
IIPSRV – IIPImage Image Server Description IIPImage is an advanced high-performance feature-rich multi-protocol image server for web-based streamed viewing and zooming of ultra high-resolution images. It is designed to be fast and bandwidth-efficient with low processor and memory requirements. The system can comfortably handle gigapixel size images as well as advanced image features such as…
ipmiutil_hpm – PICMG HPM.1 Upgrade Agent Synopsis ipmiutil hpm [-mxNUPREFJTVY] parameters Description This ipmiutil hpm subcommand updates HPM components using PICMG HPM.1 file This utility can use either the /dev/ipmi0 driver from OpenIPMI, the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, direct user-space IOs, or the IPMI LAN interface if -N. Options Command…
ipmiutil_health- show IPMI health Synopsis ipmiutil health [-ifhglmnopqsx -N node -U user -P/-R pswd -EFJTVY] Description ipmiutil health is a program that uses IPMI commands to show the health of the BMC. This utility can use either the /dev/ipmi0 driver from OpenIPMI, the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, direct user-space IOs,…