Section 8: administration and privileged commands
smp_zone_activate – invoke ZONE ACTIVATE SMP function Synopsis smp_zone_activate [–expected=EX] [–help] [–hex] [–interface=PARAMS] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) ZONE ACTIVATE function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the –sa=SAS_ADDR. Depending on the interface, the SAS_ADDR may be deduced from…
smp_write_gpio – invoke WRITE GPIO REGISTER (ENHANCED) SMP function Synopsis smp_write_gpio [–count=CO] [–data=H,H…] [–help] [–hex] [–index=IN] [–interface=PARAMS] [–raw] [–sa=SAS_ADDR] [–type=TY] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) WRITE GPIO REGISTER or a WRITE GPIO REGISTER ENHANCED function request to an SMP target. The SMP target is identified by the SMP_DEVICE and…
smp_* – invoke a SAS Serial Management Protocol (SMP) function Synopsis smp_* [–expected=EX] [–help] [–hex] [–interface=PARAMS] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] SMP_DEVICE[,N] Description Serial Attached SCSI (SAS) is a transport (also known as a interconnect) used by storage systems. A SAS system is made up of Host Bus Adapters (HBAs typically containing SCSI initiators), disks (referred…
smp_rep_zone_perm_tbl – invoke REPORT ZONE PERMISSION TABLE function Synopsis smp_rep_zone_perm_tbl [–append] [–bits=COL] [–help] [–hex] [–interface=PARAMS] [–multiple] [–nocomma] [–num=MD] [–permf=FN] [–raw] [–report=RT] [–sa=SAS_ADDR] [–start=SS] [–verbose] [–version] SMP_DEVICE[,N] Description Sends one or more SAS Serial Management Protocol (SMP) REPORT ZONE PERMISSION TABLE function requests to an SMP target. The SMP target is identified by the SMP_DEVICE and…
smp_rep_zone_man_pass – invoke REPORT ZONE MANAGER PASSWORD function Synopsis smp_rep_zone_man_pass [–fpass=FP] [–help] [–hex] [–interface=PARAMS] [–phex] [–raw] [–report=RT] [–sa=SAS_ADDR] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT ZONE MANAGER PASSWORD function requests to an SMP target. The SMP target is identified by the SMP_DEVICE and the –sa=SAS_ADDR. Depending on the interface, the…
smp_rep_self_conf_stat – invoke REPORT SELF-CONFIGURATION STATUS SMP function Synopsis smp_rep_self_conf_stat [–brief] [–help] [–hex] [–index=SDI] [–interface=PARAMS] [–last] [–one] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT SELF-CONFIGURATION STATUS function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the –sa=SAS_ADDR. Depending on the interface, the…
smp_rep_route_info – invoke REPORT ROUTE INFORMATION SMP function Synopsis smp_rep_route_info [–help] [–hex] [–index=IN] [–interface=PARAMS] [–multiple] [–num=NUM] [–phy=ID] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] [–zero] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT ROUTE INFORMATION function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the SAS_ADDR. Depending on the interface,…
smp_rep_phy_sata – invoke REPORT PHY SATA SMP function Synopsis smp_rep_phy_sata [–affiliation=AC] [–help] [–hex] [–interface=PARAMS] [–phy=ID] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] [–zero] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT PHY SATA request function to an SMP target. The SMP target is identified by the SMP_DEVICE and the SAS_ADDR. Depending on the interface, the SAS_ADDR…
smp_rep_phy_event_list – invoke REPORT PHY EVENT LIST SMP function Synopsis smp_rep_phy_event_list [–desc] [–enumerate] [–force] [–help] [–hex] [–index=IN] [–interface=PARAMS] [–long] [–nonz] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] [–zero] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT PHY EVENT LIST function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the SAS_ADDR….
smp_rep_phy_event – invoke REPORT PHY EVENT SMP function Synopsis smp_rep_phy_event [–desc] [–enumerate] [–help] [–hex] [–interface=PARAMS] [–long] [–phy=ID] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] [–zero] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT PHY EVENT function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the SAS_ADDR. Depending on the interface,…
smp_rep_phy_err_log – invoke REPORT PHY ERROR LOG SMP function Synopsis smp_rep_phy_err_log [–help] [–hex] [–interface=PARAMS] [–phy=ID] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] [–zero] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT PHY ERROR LOG function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the SAS_ADDR. Depending on the interface, the…
smp_rep_manufacturer – invoke REPORT MANUFACTURER INFORMATION SMP function Synopsis smp_rep_manufacturer [–help] [–hex] [–interface=PARAMS] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] [–zero] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT MANUFACTURER INFORMATION function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the SAS_ADDR. Depending on the interface, the SAS_ADDR may be…
smp_rep_general – invoke REPORT GENERAL SMP function Synopsis smp_rep_general [–brief] [–changecount] [–help] [–hex] [–interface=PARAMS] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] [–zero] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT GENERAL function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the SAS_ADDR. Depending on the interface, the SAS_ADDR may be…
smp_rep_exp_route_tbl – invoke REPORT EXPANDER ROUTE TABLE LIST SMP function Synopsis smp_rep_exp_route_tbl [–brief] [–help] [–hex] [–index=IN] [–interface=PARAMS] [–num=NUM] [–phy=ID] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT EXPANDER ROUTE TABLE LIST function request to an SMP target and decodes or outputs the response. The SMP target is identified by…
smp_rep_broadcast – invoke REPORT BROADCAST SMP function Synopsis smp_rep_broadcast [–broadcast=BT] [–help] [–hex] [–interface=PARAMS] [–raw] [–sa=SAS_ADDR] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) REPORT BROADCAST function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the –sa=SAS_ADDR. Depending on the interface, the SAS_ADDR may be deduced from…
smp_read_gpio – invoke READ GPIO REGISTER (ENHANCED) SMP function Synopsis smp_read_gpio [–count=CO] [–enhanced] [–help] [–hex] [–index=IN] [–interface=PARAMS] [–raw] [–sa=SAS_ADDR] [–type=TY] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) READ GPIO REGISTER or READ GPIO REGISTER ENHANCED function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the…
smp_phy_test – invoke PHY TEST FUNTION SMP function Synopsis smp_phy_test [–control=CO] [–dwords=DW] [–expected=EX] [–function=FN] [–help] [–hex] [–interface=PARAMS] [–linkrate=LR] [–pattern=PA] [–phy=ID] [–raw] [–sa=SAS_ADDR] [–sata] [–spread=SC] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) PHY TEST FUNCTION function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the SAS_ADDR….
smp_phy_control – invoke PHY CONTROL SMP function Synopsis smp_phy_control [–attached=ADN] [–expected=EX] [–help] [–hex] [–interface=PARAMS] [–max=MA] [–min=MI] [–op=OP] [–phy=ID] [–pptv=TI] [–pwrdis=PDC] [–raw] [–sa=SAS_ADDR] [–sas_pa=CO] [–sas_sl=CO] [–sata_pa=CO] [–sata_sl=CO] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) PHY CONTROL function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the…
smp_ena_dis_zoning – invoke ENABLE DISABLE ZONING SMP function Synopsis smp_ena_dis_zoning [–disable] [–ena-dis=ED] [–expected=EX] [–help] [–hex] [–interface=PARAMS] [–raw] [–sa=SAS_ADDR] [–save=SAV] [–verbose] [–version] SMP_DEVICE[,N] Description Sends a SAS Serial Management Protocol (SMP) ENABLE DISABLE ZONING function request to an SMP target. The SMP target is identified by the SMP_DEVICE and the –sa=SAS_ADDR. Depending on the interface, the…
smp_discover_list – invoke DISCOVER LIST SMP function Synopsis smp_discover_list [–adn] [–brief] [–cap] [–descriptor=TY] [–filter=FI] [–help] [–hex] [–ignore] [–interface=PARAMS] [–num=NUM] [–one] [–phy=ID] [–raw] [–sa=SAS_ADDR] [–summary] [–verbose] [–version] [–zpi=FN] SMP_DEVICE[,N] Description Sends one or more SAS Serial Management Protocol (SMP) DISCOVER LIST function requests to an SMP target and decodes or outputs the responses. The SMP target…