The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
cjpeg – compress an image file to a JPEG file Synopsiscjpeg [ options ] [ filename ] Descriptioncjpeg compresses the named image file, or the standard input if no file is named, and produces a JPEG/JFIF file on the standard output. The currently supported input file formats are: PPM (PBMPLUS color format), PGM (PBMPLUS grayscale…
bg5latex – Use LaTeX directly on a Big5 encoded .tex file bg5pdflatex – Use pdfLaTeX directly on a Big5 encoded .tex file bg5+latex – Use LaTeX directly on a Big5+ encoded .tex file bg5+pdflatex – Use pdfLaTeX directly on a Big5+ encoded .tex file cef5latex – Use LaTeX directly on a Big5 encoded .tex file…
cjdroute — Cjdns packet switch Synopsis/usr/sbin/cjdroute [<options>…] DescriptionCjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. cjdroute runs in the background and either decrypts packets addressed to this…
cjdnslog — display cjdroute log messages Synopsis/usr/bin/cjdnslog [<options>…] DescriptionCjdroute sends continuous log messages to the bit bucket. Cjdnslog captures that information in real time and sends it to stdout. OptionsWith no options, cjdnslog logs everything. • –help Print usage summary. • -f source_file.c Restrict output to log messages generated in source_file.c. • -v log_level Restrict…
cjdns-traceroute — trace cjdns packet routing Synopsiscjdns-traceroute <hostorip> DescriptionBecause cjdns is end to end encrypted, the standard traceroute always shows a direct connection. Cjdns-traceroute queries cjdroute to discover what route would be used to send a packet to the destination IP. Note that just as with the standard traceroute, there is no guarantee that that…
cjdns-online — check whether cjdns tunnel devices are available Synopsiscjdns-online [<options>…] DescriptionCjdns-online waits for cjdns to make its tunnel device available so that services that listen on the cjdns IP can start. If you have configured services to listen on the cjdns IP, then you can use: systemctl enable cjdns-wait-online to wait until this IP…
cjb2 – Simple DjVuBitonal encoder. Synopsiscjb2 [options] inputfileoutputdjvufile DescriptionThis is a simple encoder for bitonal files. Argument inputfile is the name of a PBM or bitonal TIFF file containing a single document image. This program produces a DjVuBitonal file named outputdjvufile. The default compression process is lossless: decoding the DjVuBitonal file at full resolution will…
citeproc – make CSL citations and bibliography for LaTeX Synopsisciteproc [<options>] auxname[.aux] DescriptionThe citeproc engine is a Citation Style Lanugage processor for LaTeX. It reads the auxiliary (.aux) file auxname and creates a bibliography (.bbl) file Options-h Prints the usage and exits. -V Prints the version number and exits.AuthorZeping Lee <zepinglee [at] gmail.com> Please log…
cistopbm – convert Compuserve RLE image to PBM Synopsiscistopbm [-i] [cisfile] DescriptionThis program is part of Netpbm(1) cistopbm reads a Compuserve RLE file as input. and produces a PBM image as output. Options-i Inverse: Reverse the mapping of foreground/background to black/white. See Also• pbmtocis(1) • pbm(1) CompuServe RLE file format Historycistopbm was new in Netpbm…
cisco-decrypt – decrypts an obfuscated Cisco vpn client pre-shared key Synopsiscisco-decrypt <obfuscated pre-shared key> DescriptionThis command accompanies vpnc. It decrypts the obfuscated pre-shared key from *.pcf-configuration files, which must be specified on the command line. The result will be printed to STDOUT. Authorcisco-decrypt was originally written by Maurice Massar. This man-page was written by Jörg…
dot – filter for drawing directed graphs neato – filter for drawing undirected graphs twopi – filter for radial layouts of graphs circo – filter for circular layout of graphs fdp – filter for drawing undirected graphs sfdp – filter for drawing large undirected graphs patchwork – filter for squarified tree maps osage – filter…
ciptool – Bluetooth Common ISDN Access Profile (CIP) Synopsisciptool [OPTIONS] COMMANDS Descriptionciptool(1) is used to set up, maintain, and inspect the CIP configuration of the Bluetooth subsystem in the Linux kernel. Options-i <hciX|BDADDR> The command is applied to device hciX , which must be the name or the address of an installed Bluetooth device. If not…
cinnamon – desktop Synopsiscinnamon [options] DescriptionCinnamon is a Linux desktop environment which provides advanced innovative features and a traditional user experience. The desktop layout is similar to Gnome 2. The underlying technology is similar from Gnome Shell. The emphasis is put on making users feel at home and providing them with an easy to use…
cinnamon – desktop Synopsiscinnamon [options] DescriptionCinnamon is a Linux desktop environment which provides advanced innovative features and a traditional user experience. The desktop layout is similar to Gnome 2. The underlying technology is similar from Gnome Shell. The emphasis is put on making users feel at home and providing them with an easy to use…
cinnamon-settings – Configuration panel for cinnamon SynopsisDescriptioncinnamon-settings runs the graphical user interface allowing to configure cinnamon See Alsocinnamon-menu-editor(1)
cinnamon-settings-daemon – Cinnamon settings daemon Synopsis cinnamon-settings-daemon [OPTION…]Descriptioncinnamon-settings-daemon provides many session-wide services and functions that require a long-running process. Among the services implemented by cinnamon-settings-daemon are an XSettings manager, which provides theming, font and other settings to GTK+ applications, and a clipboard manager, which preserves clipboard contents when an application exits. Many user interface elements…
cinnamon-session – Start the GNOME desktop environment Synopsiscinnamon-session [-a|–autostart=DIR] [–session=SESSION] [–failsafe|-f] [–debug] [–whale] DescriptionThe cinnamon-session program starts up the GNOME desktop environment. This command is typically executed by your login manager (either mdm, xdm, or from your X startup scripts). It will load either your saved session, or it will provide a default session for…
cinnamon-session-quit – End the current GNOME session Synopsiscinnamon-session-quit [–logout|–power-off|–reboot] [–force] [–no-prompt] DescriptionThe cinnamon-session-quit program can be used to end a GNOME session. OptionsThe following options are supported: –logout Prompt the user to confirm logout. This is the default behavior. –power-off Prompt the user to confirm system power off. –reboot Prompt the user to confirm system…
cinnamon-session-properties – Configure applications to start on login Synopsiscinnamon-session-properties DescriptionThe cinnamon-session-properties program enables the users to configure what applications should be started on login, in addition to the default startup applications configured on the system. It also proposes an interface to save a snapshot of the currently running applications so that they can automatically be…
cinnamon-screensaver – screen saver and locker Synopsiscinnamon-screensaver [OPTIONS…] DescriptionCinnamon Screensaver is the default screen saver and locker in a GNOME desktop. It is designed with simplicity and security in mind. Options–no-daemon Don’t become a daemon –debug Enable debugging code This program also accepts the standard GTK options. Authorscinnamon-screensaver is written by William Jon McCann <mccann…