The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
sndfile-cmp – compares two audio files Synopsissndfile-cmp file1 file2 Descriptionsndfile-cmp compares the audio data of two sound files. In particular most differences in the audio file header, particularly metadata like string info, are completely ignored. sndfile-cmp does its work using libsndfile (http://www.mega-nerd.com/libsndfile/). AuthorThis manual page was written by Erik de Castro Lopo <erikd [at] mega-nerd.com>.
snapraid – SnapRAID Backup For Disk Arrays Synopsissnapraid [-c, –conf CONFIG] [-f, –filter PATTERN] [-d, –filter-disk NAME] [-m, –filter-missing] [-e, –filter-error] [-a, –audit-only] [-h, –pre-hash] [-i, –import DIR] [-p, –plan PERC|bad|new|full] [-o, –older-than DAYS] [-l, –log FILE] [-Z, –force-zero] [-E, –force-empty] [-U, –force-uuid] [-D, –force-device] [-N, –force-nocopy] [-F, –force-full] [-S, –start BLKSTART] [-B, –count BLKCOUNT]…
snapconv – Sinclair ZX Spectrum snapshot converter Synopsissnapconv [ -c ] [ -n ] infile outfile Descriptionsnapconv converts between ZX Spectrum snapshot files. Options-c specifies that all data in the output snapshot should be compressed, even if that compression will result in a bigger file than if some data is left uncompressed. This helps compatibility…
snap2tzx – Convert ZX Spectrum snapshot to .tzx tape images Synopsissnap2tzx [-1 string] [-2 string] [-b colour] [-g string] [-l string] [-o filename] [-r] [-s speed] [-v] [-$ filename] snapshot Descriptionsnap2tzx converts a ZX Spectrum snapshot into a .tzx tape image. Options-1 string causes string (which has a maximum of 32 characters) to be shown…
sn – Digitally sign/verify/compare strongnames on CLR assemblies. Synopsissn [-q | -quiet] [options] [parameters] DescriptionDigitally sign, verify or compare CLR assemblies using strongnames. You can use the sn command to create "snk files" using the -k option described below. Configuration OptionsConfiguration options are stored in the machine.config configuration file under /configuration/strongNames. -c provider Change the…
* Namesmtptest – interactive SMTP test program Synopsissmtptest [ -t keyfile ] [ -p port ] [ -m mechanism ] [ -a userid ] [ -u userid ] [ -k num ] [ -l num ] [ -r realm ] [ -f file ] [ -n num ] [ -s ] [ -c ] […
smtpping – SMTP benchmarking and measurement tool Synopsis[-dqrJ46 ] [-p port ] [-w wait ] [-c count ] [-P parallell ] [-s size ] [-f file ] [-H hello ] [-S sender ] recipient [@server ] Descriptionis a small tool that performs SMTP server delay, delay variation and throughput measurements. It must be invoked with…
smtp-source – parallelized SMTP/LMTP test generator Synopsissmtp-source [options] [inet:]host[:port] smtp-source [options] unix:pathname Descriptionsmtp-source connects to the named host and TCP port (default: port 25) and sends one or more messages to it, either sequentially or in parallel. The program speaks either SMTP (default) or LMTP. Connections can be made to UNIX-domain and IPv4 or IPv6…
smtp-sink – parallelized SMTP/LMTP test server Synopsissmtp-sink [options] [inet:][host]:port backlog smtp-sink [options] unix:pathname backlog Descriptionsmtp-sink listens on the named host (or address) and port. It takes SMTP messages from the network and throws them away. The purpose is to measure client performance, not protocol compliance. smtp-sink may also be configured to capture each mail delivery…
smproxy – Session Manager Proxy Synopsissmproxy [-clientId id] [-restore saveFile] [-version] Options-clientId id Specifies the session ID used by smproxy in the previous session. -restore saveFile Specifies the file used by smproxy to save state in the previous session. -version Prints the program version and exits.Descriptionsmproxy allows X applications that do not support X11R6 session…
SMPlayer – The best GUI frontend for MPlayer Synopsissmplayer [-minigui] [-mpcgui] [-defaultgui] [-config-path <directory>] [-send-action <action_name>] [-actions <action_list>] [[-no]-close-at-end] [[-no]-fullscreen] [-sub <subtitle_file>] [-pos <x> <y>] [-size <width> <height>] [-add-to-playlist] [-disable-server] [-help|–help|-h|-?] [<media1>] [<media2>]… DescriptionSMPlayer is a GUI media player based on Qt, using mplayer(1) as its backend. Options-minigui Open the mini GUI instead of the…
smoltSendProfie – Submit Smolt hardware profile to server SynopsissmoltSendProfile [options] DescriptionsmoltSendProfile program submits the hardware profile of the current machine to the Smoon server. Smolt is a cross-desktop hardware reporting tool for GNU/Linux based systems. Options-p, –printOnly Display information only; do not send -a, –autoSend Don’t prompt to send; just send -r, –retry Continue to…
smoltGui – GUI for Smolt hardware profile submission SynopsissmoltGui DescriptionsmoltGui is a graphical user interface that can be used to submit Smolt hardware profiles to a Smoon server. Smolt is a cross-desktop hardware reporting tool for GNU/Linux based systems. OptionssmoltGui has no command-line options. See AlsosmoltSendProfile(1), smoltDeleteProfile(1). AuthorsmoltGui was written by Mike McGrath <mmcgrath [at]…
smoltDeleteProfie – Delete Smolt hardware profile from server SynopsissmoltDeleteProfile [options] DescriptionsmoltDeleteProfile deletes the machine’s profile from a remote Smoon server. Smolt is a cross-desktop hardware reporting tool for GNU/Linux based systems. Options-s SMOON_URL, –server=SMOON_URL Specify the URL of the server -u USERAGENT, –useragent=USERAGENT, –user_agent=USERAGENT Specify HTTP user agent (default "smolt/0.97") -t TIMEOUT, –timeout=TIMEOUT Specify HTTP…
smokeping_cgi – SmokePing webfrontend OverviewThis script acts as a ‘website’ for your SmokePing monitoring operation. It presents the targets you are looking at in a tree structure and draws graphs as they are required by people looking at the pages. DescriptionTo get smokeping_cgi going, you need a webserver which allows you to run CGI or…
smokeping – Commandline tool for SmokePing Synopsissmokeping [ –email | –makepod | –version | –restart ] Options: –man[=x] Show the manpage for the program (or for probe x, if specified) –help Help :-) –email Send SmokePing Agents to all Targets marked DYNAMIC –config=x Use a config file different from the default –check Just check the…
smixlate – translate SMI/SPPI identifiers Synopsissmixlate [ -Vhm ] [ -c file ] [ -p module ] [ -l level ] module(s) DescriptionThe smixlate program is used to translate identifiers and especially OIDs into a more human readable format. Options-V, –version Show the smixlate version and exit. -h, –help Show a help text and exit….
smiucv – helper utility that provides an IUCV interface to the z/VM System Management API (SMAPI). Synopsyssmiucv [user] [name] <request> Descriptionsmiucv is a utility which reads requests from stdin, sends them to the SMAPI server via IUCV and writes the response to stdout. It is intended to be used with the smaclient shell command. Optional…
smistrip – extract MIB or PIB modules from text files, like RFCs or I-Ds Synopsissmistrip [ -Vhn ] [ -d dir ] [ -m module ] [ file(s) ] DescriptionThe smistrip program is used to extract MIB and PIB module files from ASCII documents like RFCs or Internet Drafts. Modules are identified by a starting…
smispy_lsmplugin — LibstorageMgmt SMI-S Plugin DescriptionLibstorageMgmt SMI-S Plugin allows LibstorageMgmt user to manage storage arrays like: EMC VNX/VMAX, HDS AMS and LSI MegaRAID etc. via SNIA SMI-S standard. The ‘smispy_lsmplugin’ executable file is for LibstorageMgmt daemon to execute when client user requests SMI-S plugin. UriTo use this plugin, users should set their URI to this…