The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
pmdabash – Bourne-Again SHell trace performance metrics domain agent Synopsis$PCP_PMDAS_DIR/bash/pmdabash [-C] [-d domain] [-l logfile] [-I interval] [-t timeout] [-U username] configfile Descriptionpmdabash is an experimental Performance Metrics Domain Agent (PMDA) which exports "xtrace" events from a traced bash(1) process. This includes the command execution information that would usually be sent to standard error with…
pmdaapache – Apache2 web server performance metrics domain agent (PMDA) Synopsis$PCP_PMDAS_DIR/apache/pmdaapache [-d domain] [-l logfile] [-U username] [-S server] [-P port] [-L location] Descriptionpmdaapache is a Performance Metrics Domain Agent (PMDA) which extracts performance metrics describing the state of an Apache web server. The apache PMDA exports metrics that measure the request rate, cumulative request…
pmdaaix, pmdadarwin, pmdafreebsd, pmdalinux, pmdanetbsd, pmdasolaris, pmdawindows – operating system kernel performance metrics domain agents Synopsis$PCP_PMDAS_DIR/aix/pmdaaix [-d domain] [-l logfile] [-U username] $PCP_PMDAS_DIR/darwin/pmdadarwin [-d domain] [-l logfile] [-U username] $PCP_PMDAS_DIR/freebsd/pmdafreebsd [-d domain] [-l logfile] [-U username] $PCP_PMDAS_DIR/linux/pmdalinux [-d domain] [-l logfile] [-U username] $PCP_PMDAS_DIR/netbsd/pmdanetbsd [-d domain] [-l logfile] [-U username] $PCP_PMDAS_DIR/solaris/pmdasolaris [-d domain] [-l logfile]…
pmdaactivemq – ActiveMQ performance metrics domain agent (PMDA) Descriptionpmdaactivemq is a Performance Metrics Domain Agent (PMDA) which exports performance metrics from ActiveMQ. InstallationThis PMDA requires that ActiveMQ has been installed with the Jolokia JMX-HTTP bridge enabled. By default the PNDA will connect to localhost at port 8161 with a username and password of ‘admin’. This…
pmd2svg – manual page for pmd2svg 0.0.3 Synopsispmd2svg [OPTION] INPUT Description`pmd2svg’ converts Adobe PageMaker documents to SVG. Options–help show this help message –version show version information and exitReporting BugsReport bugs to <https://bugs.documentfoundation.org/>.
pmd2raw – manual page for pmd2raw 0.0.3 Synopsispmd2raw [OPTION] INPUT Description`pmd2raw’ is used to test libpagemaker. Options–callgraph display the call graph nesting level –help show this help message –version show version information and exitReporting BugsReport bugs to <https://bugs.documentfoundation.org/>.
pmcpp – simple preprocessor for the Performance Co-Pilot Synopsispmcpp [-Prs] [-D name[=value] …] [-I dir …] [infile] Descriptionpmcpp provides a very simple pre-processor originally designed for manipulating Performance Metric Name Space (PMNS) files for the Performance Co-Pilot (PCP), but later generalized to provide conditional blocks, include file processing, in-line shell command execution and macro substitution…
pmconfirm, pmmessage, pmquery – general purpose dialog box Synopsispmconfirm [-c] [-b button-name] [-B default-button-name] [-t string] [-file filename] [-icon icontype] [-font font] [-header titlebar-string] [-useslider] [-noslider] [-noframe] [-exclusive] pmmessage [-buttons label1[:value1][,label2[:value2][,…]]] [-center] [-nearmouse] [-default button] [-file filename] [-print] [-timeout sec] message… pmquery [-input] [all above options…] [message…] Descriptionpmquery provides a command-line-option compatible implementation of the…
pmconfig – Performance Co-Pilot configuration parameters Synopsis$PCP_BINADM_DIR/pmconfig [-a|-l] [-L] [-s] [name …] Descriptionpmconfig displays the values for some or all configuration parameters of the local Performance Co-Pilot toolkit installation. The -L option may be used to change the default reporting mode so that the capabilities of the PCP library are reported, rather than the PCP…
pmclient, pmclient_fg – a simple performance metrics client Synopsispmclient [-a archive] [-h host] [-n pmnsfile] [-P] [-S numsec] [-s samples] [-t interval] [-Z timezone] [-z] Descriptionpmclient and pmclient_fg are simple clients that use the Performance Metrics Application Programming Interface (PMAPI) to report some high-level system performance metrics. The real value of these tools is as…
pmcheck – check that Perl is set up correctly for Perl modules Descriptionpmcheck checks that Perl is correctly set up for Perl modules. For now, pmcheck just verifies that the entries in @INC are existing readable directories. See Alsopmdirs(1), pmpath(1) AUTHOR and COPYRIGHTSCopyright (C) 2012-2014 Mark Leighton Fisher. LicenseThis is free software; you can redistribute…
pmchart – strip chart tool for Performance Co-Pilot Synopsispmchart [-CVWz] [-A align] [-a archive] [-c configfile] [-f fontfamily] [-F fontsize] [-g geometry] [-h host] [-o outfile] [-O offset] [-p port] [-s samples] [-S starttime] [-T endtime] [-t interval] [-v visible] [-Z timezone] [-geometry geometry] [sources…] Descriptionpmchart is a graphical utility that plots performance metrics values…
pmcd_wait – wait for PMCD to accept client connections Synopsis$PCP_BINADM_DIR/pmcd_wait [-h host] [-t interval] [-v] Descriptionpmcd_wait waits for the Performance Metrics Collector Daemon (PMCD) to be running and accepting client connections. Unless directed to another host by the -h option, pmcd_wait will try to contact pmcd(1) on the local host. pmcd_wait will timeout and abandon…
pmcd – performance metrics collector daemon Synopsispmcd [-AfQSv] [-c config] [-C dirname] [-H hostname] [-i ipaddress] [-l logfile] [-L bytes] [-M certname] [–[n|N] pmnsfile] [-p port[,port …]] [-P passfile] [-q timeout] [-s sockname] [-T traceflag] [-t timeout] [-U username] [-x file] Descriptionpmcd is the collector used by the Performance Co-Pilot (see PCPIntro(1)) to gather performance…
pmcat – page through a module file DescriptionGiven a module name, figure out the path name and send that to the user’s pager. $ pmcat CGIThis works also on alternate installed versions of Perl: $ oldperl -S pmcat strict $ filsperl -S pmcat ThreadsThis command is mostly here for people too lazy to type $…
pmap – report memory map of a process Synopsispmap [options] pid […] DescriptionThe pmap command reports the memory map of a process or processes. Options-x, –extended Show the extended format. -d, –device Show the device format. -q, –quiet Do not display some header or footer lines. -A, –range low,high Limit results to the given range…
pman – show a module’s man page DescriptionSend a module’s pod through pod2text and your pager. This is mostly here for people too lazy to type $ pod2text `pmpath CGI` | $PAGERExamples $ pman CGI $ pman CursesOr running under different versions of Perl: $ oldperl -S pman CGI $ filsperl -S pman ThreadsSee Alsopod2text(1),…
pmall – show all installed versions and descs Synopsis pmall [-d] [-w] [-a] [-s]pmall – show all installed versions and descs DescriptionThis program runs through all your installed modules and tells you what they’re for and what version number they are at. The following options are honored: -v give debug info -w warn about missing…
pmafm – Performance Co-Pilot archive folio manager Synopsispmafm folioname [command [arg …]] DescriptionA collection of one or more Performance Co-Pilot (PCP) archive logs may be combined with a control file to produce a PCP archive folio. Archive folios are created using either mkaf(1) or the interactive “record mode” services of PCP clients like pmchart(1). pmafm…
pm_which – find installed modules Synopsis pm_which [ options ] module(s) Returns the path to the given module(s)OPTIONS -q, –quiet Just print paths -p, –paths Just convert the module name into a relative path -a, –all Print all paths, not just the first one found -n, –namespace Print all modules in the given namespace -m…