The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
setpix – Set FITS or IRAF image values Synopsissetpix [-vn] file.fts [x_range y_range value] [@valuefile] DescriptionSet a specified pixel or range of pixels in a FITS or IRAF image to a specified value. More than one range of pixels and values may be specified on one command line. A file of xrange yrange value triplets…
setmetamode – define the keyboard meta key handling Synopsissetmetamode [ options ] [ argument ] DescriptionWithout argument, setmetamode prints the current Meta key mode. With argument, it sets the Meta key mode as indicated. The setting before and after the change are reported. The Meta key mode is specific for each VT (and the VT…
setmclk – adjust the memory timing of certain Cirrus cards. Synopsissetmclk DescriptionThis program sets the memory clock of Cirrus 5424/26/28 cards. The first three values could be set by utility programs that came with my card (AVGA3), but somewhat higher values seem to work (on my card at least). It may be that better and…
setleds – set the keyboard leds Synopsissetleds [-v] [-L] [-D] [-F] [{+|-}num] [{+|-}caps] [{+|-}scroll] DescriptionSetleds reports and changes the led flag settings of a VT (namely NumLock, CapsLock and ScrollLock). Without arguments, setleds prints the current settings. With arguments, it sets or clears the indicated flags (and leaves the others unchanged). The settings before and…
sethead – Set FITS or IRAF header keyword values Synopsissethead [-dknv][r letter] <FITS or IRAF file> kw1=val1 kw2=val2 … kwn=valuen DescriptionSet parameters in the header of a FITS or IRAF image. If the keywords do not already exist, they are added at the end of the header. Values are assumed to be numeric if they…
setfattr – set extended attributes of filesystem objects Synopsissetfattr [-h] -n name [-v value] pathname… setfattr [-h] -x name pathname… setfattr [-h] –restore=fileDescriptionThe setfattr command associates a new value with an extended attribute name for each specified file. Options-n name, –name=name Specifies the name of the extended attribute to set. -v value, –value=value Specifies the…
setfacl – set file access control lists Synopsissetfacl [-bkndRLPvh] [{-m|-x} acl_spec] [{-M|-X} acl_file] file … setfacl –restore={file|-} DescriptionThis utility sets Access Control Lists (ACLs) of files and directories. On the command line, a sequence of commands is followed by a sequence of files (which in turn can be followed by another sequence of commands, …)….
setcifsacl – Userspace helper to alter an ACL in a security descriptor for Common Internet File System (CIFS) Synopsissetcifsacl [-v|-a|-D|-M|-S] "{one or more ACEs}" {file system object}DescriptionThis tool is part of the cifs-utils suite. setcifsacl is a userspace helper program for the Linux CIFS client file system. It is intended to alter an ACL of…
set_show_service – enable or disable a service for the current user Synopsisset_show_service [–enable <service>] [–disable <service>] Descriptionset_show_service enables or disables the display of a specified service item. Options–enable <service> enable the given service for the user running this command. –disable disables the given service for the user running this command. BugsNone known See Alsomake_services(1), GNUstep(7)…
bash, :, ., [, alias, bg, bind, break, builtin, caller, cd, command, compgen, complete, compopt, continue, declare, dirs, disown, echo, enable, eval, exec, exit, export, false, fc, fg, getopts, hash, help, history, jobs, kill, let, local, logout, mapfile, popd, printf, pushd, pwd, read, readonly, return, set, shift, shopt, source, suspend, test, times, trap, true, type,…
sessreg – manage utmpx/wtmpx entries for non-init clients Synopsissessreg [-w wtmpx-file] [-u utmpx-file] [-L lastlog-file] [-l line-name] [-h host-name] [-s slot-number] [-x Xservers-file] [-t ttys-file] [-V] [-a] [-d] user-name DescriptionSessreg is a simple program for managing utmpx/wtmpx and lastlog entries for xdm sessions. This version of sessreg is built using the modern POSIX pututxline(3c) interfaces,…
sessionStats — show cjdns crypto sessions SynopsissessionStats DescriptionCjdroute always talks to other nodes over a "session" similar to a TLS session. A session is required not only to talk to each peer, but also when talking to intermediate nodes to ask them about their peers when planning a route. The cjdns protocol offers Perfect Forward…
session-migration – Migrate in user session settings. Synopsissession-migration [options] DescriptionThe session-migration program can be used to migrate in-session user data when a program is evolving its configuration, or needing to have files moved and so on. This program is generally autostarted at the very beginning of the session and integrates caching capabilities. The general usage…
session-installer – allows applications to easily install and remove software Synopsissession-installer DescriptionSession-installer allows applications to easily install additional software (e.g. extensions or GSreamer codecs), uninstall files and perform simple package status queries by calling a distribution neutral D-Bus interface. The whole process of confirmation, error reporting and progress notification is handled by sessioninstaller. Currently it…
sesearch – SELinux policy query tool Synopsissesearch [OPTIONS] RULE_TYPE [RULE_TYPE …] [EXPRESSION] [POLICY …] Descriptionsesearch allows the user to search the rules in a SELinux policy. Policysesearch supports loading a SELinux policy in one of four formats. source A single text file containing policy source for versions 12 through 21. This file is usually named…
services-admin – Services Administration Tool Synopsisservices-admin [OPTION…] Descriptionservices-admin is part of the GNOME system tools, a set of tools to easily access and manage system configuration. services-admin allows you to specify which services will be started during the system boot process. Optionsservices-admin accepts the standard GNOME and GTK options. Authorsservices-admin was written by Carlos Garnacho…
servertool – Provides an easy-to-use interface for developers to register, unregister, start up, and shut down a persistent server. Synopsisservertool -ORBInitialPort nameserverport [ options ] [ commands ]options The command-line options. See Options. commands The command-line commands. See Commands.DescriptionThe servertool command provides the command-line interface for developers to register, unregister, start up, and shut down…
servertool – Provides an easy-to-use interface for developers to register, unregister, start up, and shut down a persistent server. Synopsisservertool -ORBInitialPort nameserverport [ options ] [ commands ]options The command-line options. See Options. commands The command-line commands. See Commands.DescriptionThe servertool command provides the command-line interface for developers to register, unregister, start up, and shut down…
servertool – Provides an easy-to-use interface for developers to register, unregister, start up, and shut down a persistent server. Synopsisservertool -ORBInitialPort nameserverport [ options ] [ commands ]options The command-line options. See Options. commands The command-line commands. See Commands.DescriptionThe servertool command provides the command-line interface for developers to register, unregister, start up, and shut down…
servertool – Provides an easy-to-use interface for developers to register, unregister, start up, and shut down a persistent server. Synopsisservertool -ORBInitialPort nameserverport [ options ] [ commands ]options The command-line options. See Options. commands The command-line commands. See Commands.DescriptionThe servertool command provides the command-line interface for developers to register, unregister, start up, and shut down…