The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
gpsdrive – displays GPS position on a map Synopsisgpsdrive [options] About this manual pageThis manual page explains the basic functions of GpsDrive 2.10 and additional information regarding map setup and interfacing with support software. Within GpsDrive nearly all buttons have tooltips and there is also a HELP window describing the usage of mouse buttons and…
gpsdecode – decode GPS, RTCM or AIS streams into a readable format Synopsis gpsdecode [-c] [-d] [-e] [-j] [-s] [-t typelist] [-u] [-v] [-D debuglevel] [-V]DescriptionThis tool is a batch-mode decoder for NMEA and various binary packet formats associated with GPS, AIS, and differential-correction services. It produces a JSON dump on standard output from binary on standard…
gpsd_nmea.sh – switches your gpsd to NMEA mode Synopsisgpsdrive [options] This is needed for some Gps-Receivers with SIF Chip�set. If you don’t switch them into NMEA mode the position will lag about 5-10 seconds behind the reality. AuthorJ�rg Ostertag http://www.gpsdrive.de WarrantyThis program is distributed in the hope that it will be useful, but WITHOUT ANY…
gpsctl – control the modes of a GPS Synopsis gpsctl [-h] [-b | -n] [-x control] [-e] [-f] [-l] [-s speed] [-t devicetype] [-D debuglevel] [-V] [serial-port]Descriptiongpsctl can switch a dual-mode GPS between NMEA and vendor-binary modes. It can also be used to set the device baudrate. Note: Not all devices have these capabilities. If you have only one…
gpscorrelate – correlates digital images with GPS data filling EXIF fields Synopsis gpscorrelate [-z | –timeadd +/-HH[:MM]] [-O | –photooffset seconds] [-i | –no-interpolation] [-v | –verbose] [-d | –datum datum] [-n | –no-write] [-m | –max-dist time] [-t | –ignore-tracksegs] [-M | –no-mtime] [-f | –fix-timestamps] [-p | –degmins] -g file.gpx image.jpg… gpscorrelate -s | –show | -o |…
gpscat – dump the output from a GPS Synopsis gpscat [-s speed] [-p] [-t] [-D debuglevel] file-or-serial-portDescriptiongpscat is a simple program for logging and packetizing GPS data streams. It takes input from a specified file or serial device (presumed to have a GPS attached) and reports to standard output. The program runs until end of input or…
gps2udp – feed the take from gpsd to one or more aggregation sites Synopsis gps2udp [-h] [-n] [-j] [-a] [-u hostname:udpport] [-c count] [-d 1|2] [-v] [server [:port [:device]]]Descriptiongps2udp is a tool to connect to gpsd and output the received sentences to one or many UDP host:port destinations. This makes the program useful for feeding AIS information from…
gps, xgps, xgpsspeed, cgps, lcdgps, gegps – test clients for gpsd Synopsis xgps [-D debug-level] [-h] [-V] [-l [[d] | [m] | [s]]] [-u [[i] | [n] | [m]]] [server [:port [:device]]] xgpsspeed [-D debug-level] [-h] [-V] [–speedunits {[mph] | [kph] | [knots]}] [server [:port [:device]]] cgps [-D debug-level] [-h] [-V] [-l [[d] | [m] | [s]]] [-m] [-s] [-u [[i] | [n] | [m]]] [server [:port [:device]]] lcdgps [-h] [-V] [-l [[d] | [m] | [s]]] [-u [[i] | [n] | [m]]] [server [:port [:device]]] gpxlogger [-D debug-level] [-d] [-e export-method] [-f filename] [-l] [-m minmove]…
gprof – display call graph profile data Synopsisgprof [ -[abcDhilLrsTvwxyz] ] [ -[ACeEfFJnNOpPqQRStZ][name] ] [ -I dirs ] [ -d[num] ] [ -k from/to ] [ -m min-count ] [ -R map_file ] [ -t table-length ] [ –[no-]annotated-source[=name] ] [ –[no-]exec-counts[=name] ] [ –[no-]flat-profile[=name] ] [ –[no-]graph[=name] ] [ –[no-]time=name] [ –all-lines ] [ –brief ] [ –debug[=level] ] [ –function-ordering ] [ –file-ordering map_file ] [ –directory-path=dirs ] [ –display-unused-functions ] [ –file-format=name ] [ –file-info ] [ –help ] [ –line ] [ –inline-file-names ] [ –min-count=n ] [ –no-static ] [ –print-path ] [ –separate-files ] [ –static-call-graph ] [ –sum ] [ –table-length=len ] [ –traditional ] [ –version ] [ –width=n ] [ –ignore-non-functions ] [ –demangle[=STYLE] ] [ –no-demangle ] [–external-symbol-table=name] [ image-file ] [ profile-file … ] Description"gprof" produces an execution profile of C, Pascal, or Fortran77 programs. The effect of called routines is incorporated in the profile of each caller….
gprocessor – Gnash SWF Processor Synopsisgprocessor (options)… (file)…DescriptionGprocessor is a debugging tool for SWF files, a companion to Gnash. It is most often used for debugging and running testcases, as it is equivalant to running Gnash with no graphic output. This tool is primarily used by Gnash developers, or anyone who wishes to run the…
gpredict – real-time satellite tracking and orbit prediction program Synopsisgpredict [OPTION]… DescriptionGpredict is a real-time satellite tracking and orbit prediction program. It can track an unlimited number of satellites and display the satellite data in various visualisation modules like lists, maps and polar plots. Gpredict can also provide detailed information about upcoming satellite passes relative…
gpre – Firebird source pre-processor Synopsisgpre [option…] input output Descriptiongpre is a source pre-processor for easier writing of programs working with the raw Firebird API. It supports multiple source languages. Using gpre, you can mix special SQL-like language with the normal program source. Options-ada Source is an Ada program. -handles package name Ada only. Specifies…
gpointing-device-settings – program to configure pointing devices Synopsisgpointing-device-settings [options] DescriptionThis manual page documents briefly the gpointing-device-settings command. gpointing-device-settings is a program that allow you to control pointing devices in X session. OptionsThis program only accepts standard Gtk options and nothing on his own. See Alsohttp://live.gnome.org/GPointingDeviceSettings Authorgpointing-device-settings was written by Hiroyuki Ikezoe <poincare [at] ikezoe.net>. This…
gpodder – A Media aggregator and Podcast catcher Synopsisgpodder [options] DescriptiongPodder enables you to subscribe to RSS feeds and download podcast episodes from these feeds. Downloaded podcasts can either be synchronized to portable MP3 players (including iPods) or played back on the user’s desktop. See gpo(1) for the command-line interface. Options–version show program’s version number…
gpodder-backup – Backup and restore utility for gPodder user data Synopsisgpodder-backup [–create|–extract] <archive.gpo.tar.gz> [options] gpodder-backup –purge DescriptionThis utility can be used to create a dump of the current gPodder data (configuration files + downloads), optionally skipping the real contents of the download folder (for submitting your data to a bug report without having to transfer…
gpmetis – Partitions a graph into a specified number of parts. Synopsisgpmetis [options] graphfile nparts DescriptionRequired parameters graphfile Stores the graph to be partitioned. nparts The number of partitions to split the graph. Optional parameters -ptype=string Specifies the scheme to be used for computing the k-way partitioning. The possible values are: rb – Recursive bisectioning…
gpm-root – a default handler for gpm, used to draw menus on the root window Synopsisgpm-root [ options ] DescriptionThe program gpm-root is designed to handle Control-Mouse events to draw menus on the background of the current tty. The actual menus are described by a configuration file in the user’s home directory. Please note that…
gplink – GNU PIC linker Synopsisgplink [options] [objects] [libraries] WarningThe information in this man page is an extract from the full documentation of gputils and is limited to the meaning of the options. For complete and current documentation, refer to "gputils.ps" located in the gputils docs directory. Descriptiongplink combines a number of object and archive…
gplib – GNU PIC librarian Synopsisgplib [options] library [member] WarningThe information in this man page is an extract from the full documentation of gputils and is limited to the meaning of the options. For complete and current documentation, refer to "gputils.ps" located in the gputils docs directory. Descriptiongplib creates, modifies, and extracts from COFF archives…
gplcpt – convert GIMP colour palette (gpl) to GMT colour palette table (cpt). Synopsis gplcpt [-b rgb] [-f rgb] [-h] [-n rgb] [-o file] [-v] [-V] [file]DescriptionThe gplcpt converts GIMP(1) colour palette (gpl) files to the GMT(1) colour palette table (cpt) format. The output is a piecewise constant (step or discrete) gradient. One could use cptcont(1) program to convert…