Linux Manuals

megatron, unhex, unbin, unsingle, hqx2bin, single2bin, macbinary – Macintosh file format transformer Synopsis megatron [sourcefile…] unbin [sourcefile…] unhex [sourcefile…] unsingle [sourcefile…] hqx2bin [sourcefile…] single2bin [sourcefile…] macbinary [sourcefile…]Descriptionmegatron is used to transform files from BinHex, MacBinary, AppleSingle, or netatalk style AppleDouble formats into MacBinary or netatalk style AppleDouble formats. The netatalk style AppleDouble format is the…

hpumount — unmount an HFS+ volume Synopsishpumount Descriptionhpumount is used to forget about a previously mounted HFS+ volume. However, the command does not change the volume itself, it simply removes the .hfsplusvolume file in the user’s home directory.   See alsohfsplus(7), hpmount(1), hpls(1), hpcd(1), hppwd(1), hpcopy(1), hprm(1), hpmkdir(1), hpfsck(1).     AuthorThis manual page was…

hpsa_lsmplugin — LibstorageMgmt HP SmartArray plugin DescriptionLibstorageMgmt hpsa plugin allows user to manage HP SmartArray via vendor tool hpssacli[1]. The ‘hpsa_lsmplugin’ executable file is for libStorageMgmt daemon to execute when client user specifies hpsa plugin in the URI. UriTo use this plugin, users should set their URI to this format: hpsa:// or hpsa://?hpssacli=<path_of_hpssacli>URI parameters These…

hprm — remove a file or directory on an HFS+ volume Synopsishprm [-R] [-f] hfs-path Descriptionhprm removes the file or directory specified by hfs-path. Since write access to HFS+ volumes is still experimental, the program prints a warning message and prompts the user before writing anything to the file system.   hprm accepts the following…

hppwd — print the current working directory on an HFS+ volume Synopsishppwd Descriptionhppwd prints the absolute pathname to the current directory on the previously mounted HFS+ volume. Note that individual volume and directory names in the path are separated with slashes "/" instead of the Macintosh-style colons ":".   See alsohfsplus(7), hpmount(1), hpls(1), hpcd(1), hprm(1),…

hpmount — change directory on an HFS+ volume Synopsishpmount [-r] [-pn] source-path Descriptionhpmount introduces a new HFS+ volume. The source path may specify a block device or a regular file containing an HFS+ volume image. Furthermore, hpmount creates the file .hfsplusvolume in the user’s home directory, where the source path and the catalogue ID of…

hpmkdir — create a directory on an HFS+ volume Synopsishpmkdir hfs-path Descriptionhpmkdir creates a new directory under the current working directory on the previously mounted HFS+ volume. Since write access to HFS+ volumes is still experimental, the program prints a warning message and prompts the user before writing anything to the file system.   See…

hpls — list the contents of a directory on an HFS+ volume Synopsishpls [options] [hfs-path …] Descriptionhpls is used to list files and directories on an HFS+ volume. If one or more arguments are given, each file or directory is shown; otherwise, the contents of the current working directory are displayed.   Options-1 Each entry…

hpxml – An openhpi sample application that displays system view in XML. Synopsis hpixml [-D nn] [-s] [-i -t ] [-N host[:port]] [-C=file] [-h] hpixml [–domain=nn] [–xsd] [–indent –text ] [–host=host[:port]] [–cfgfile=file] [–help]Descriptionhpixml displays system view in XML. If no domain or host is selected, hpixml uses the default domain as specified in the openhpiclient.conf…

hpiwdt – This sample openhpi application reads and enables the watchdog timer. Synopsis hpiwdt [-D nn] [-N host[:port]] [-C <cfgfile>] [-t sec] [-X] [-h] hpiwdt [–domain=nn] [–host=host[:port]] [–cfgfile=file] [–disable][–enable][–reset][–timeout n] [–debug] [–help]Descriptionhpiwdt reads and enables the watchdog timer. If no domain or host is selected, hpiwdt uses the default domain as specified in the openhpiclient.conf…

hpitree – A openhpi sample application that shows in details the resources (rpt’s) and resources’ manamegement instruments (rdr’s) data structures of the managed openHPI complex. Synopsis hpitree [-D nn] [-N host[:port]] [-C <cfgfile>] [-acdiorsw ] [-n nn] [-X] [-h] hpitree [–domain=nn] [–host=host[:port]] [–cfgfile=file] [–all] [–controls] [–rdrs] [–inventories] [–rpts] [–sensors] [–watchdogs] [–overview] [–resource=nn] [–debug] [–help]Descriptionhpitree walks…

hpitop – A openhpi sample application that displays highlevel topology for a managed openHPI complex. Synopsis hpitop [-D nn] [-N host[:port]] [-C <cfgfile>] [-rscwiafd] [-n nn] [-X] [-h] hpitop [–domain=nn] [–host=host[:port]] [–cfgfile=file] [–rpts] [–sensors] [–controls] [–watchdogs] [–inventories] [–annunciators] [–fumis] [–dimis] [–resource=nn] [–debug] [–help]Descriptionhpitop walks the Resource Present Table (RPT) of the managed openHPI complex and…

hpithres – This sample openhpi application interactively displays sensors and sensor info. Synopsis hpithres [-D nn] [-N host[:port]] [-C <cfgfile>] [-X] [-h] hpithres [–domain=nn] [–host=host[:port]] [–cfgfile=file] [–debug] [–help]Descriptionhpithres interactively displays sensor info for resources with Sensor Capability. Resources, sensors,and sensor info can be individually selected. If no domain or host is selected, hpithres uses the…

hpisettime – This sample openhpi application excercises Event Log clock APIs. Synopsis hpisettime [-D nn] [-N host[:port]] [-C <cfgfile>] -d mm/dd/yyyy -t HH:MM:SS [-X] [-h] hpisettime [–domain=nn] [–host=host[:port]] [–cfgfile=file] –date=mm/dd/yyyy –time=HH:MM:SS [–debug] [–help]Descriptionhpisettime sets new date and time for the Event Log clock. If no domain is selected, hpisettime uses a session with the default…

hpisensor – This sample openhpi application displays sensor info for all resources with Sensor CapabilitySynopsis hpisensor [-D nn] [-N host[:port]] [-C <cfgfile>] [-t -r -s -X -h] [-E epath] hpisensor [–domain=nn] [–host=host[:port]] [–cfgfile=file] [–threshold –range –eventstate –debug –help] [–entity-path="epath"]Descriptionhpisensor displays sensor info for all resources with Sensor Capability. Option -E (entity-path) restricts the output on…

hpireset – This sample openhpi application exercises HPI Reset Management APIs. Synopsis hpireset [-D nn] [-N host[:port]] [-C <cfgfile>] [-r -w -h -X] hpireset [–domain nn] [–host=host[:port]] [–cfgfile=file] [–hard –warm –help –debug]Descriptionhpireset searches the Resource Presence Table (RPT) for resources with Reset Capability. It sends the requested reset action to all resources with SAHPI_CAPABILITY_RESET. If…

hpipower – This sample openhpi application exercises HPI Power Management APIs. Synopsis hpipower [ -D nn ] [-N host[:port]] [-C <cfgfile>] [ -d -p -r -u -X -h] [ -b n ] hpipower [–domain=nn] [–host=host[:port]] [–cfgfile=file] [–power-down –power-up –reset –unattended –debug –help] [–blade=n ]Descriptionhpipower searches the Resource Presence Table (RPT) for resources with Power Capability….

hpionIBMblade – An openhpi sample application that shows how two (2) openhpi plugins can be used to display and manage resources of an IBM Blade with Basedboard Management Controller (BMC). Synopsis hpionIBMblade [-D nn] [-N host[:port]] [-C <cfgfile>] [ -X ] [ -h ] hpionIBMblade [–domain nn] [–host=host[:port]] [–cfgfile=file] [–debug] [–help]Description hpionIBMblade shows how two…

hpiinv – An openhpi sample application that shows resources’ inventory records. Synopsis hpiinv [-D nn] [-N host[:port]] [-C <cfgfile>] [-V] [ -X] [-a tag] [-h] hpiinv [–domain=nn] [–host=host[:port]] [–cfgfile=file] [–verbose] [–debug] [–asset-tag=tag] [–help]Descriptionhpiinv walks the RPT (Resource Present Table) looking for resources that have Inventory Capability. It displays all inventory records found. If no domain…

hpigensimdata – A openhpi client application supplementing the dynamic simulator plugin. Synopsis hpigensimdata [-D nn] [-N host[:port]] [-C <cfgfile>] [-r res_id] [-f filename] [-m UPD|INIT] [-h] hpigensimdata [–domain=nn] [–host=host[:port]] [–cfgfile=file] [–resource=res_id] [–file=filename] [–mode=UPD|INIT] [–help]Descriptionhpigensimdata generates data for the dynamic simulator plugin by reading the current configuration. It will print all HPI information in a format…