The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
vconfig – VLAN (802.1q) configuration program. Synopsis vconfig [lots of long options] Description The vconfig program allows you to create and remove vlan-devices on a vlan enabled kernel. Vlan-devices are virtual ethernet devices which represents the virtual lans on the physical lan. Options add [interface-name] [vlan-id] Creates a vlan-device on [interface-name]. The resulting vlan-device will…
vboxputty – a self-dialing/-calling vboxgetty Synopsis vboxputty -d device [-f config-file] [-c phonenumber] [-s ring-timeout] [-w wait] [-t redial] [-r redial-pause] vboxputty [-hv] Description vboxputty is a vboxgetty, not waiting for, but triggering a call. After connect, vboxputty is acting exactly like vboxgetty. vboxputty exits with 0 if a connection was established, 99 on BUSY….
vboxmail – script to send notification of new voice message Synopsis vboxmail messagename callername callerid mail-to-address Description vboxmail is used by vboxgetty to send notification of a new voice message via email. It is not meant to be called directly by any user. See Also vboxgetty(8), vboxgetty.conf(5) Author This manual page was written by Paul…
vboxgetty – isdn voice box (getty) Synopsis vboxgetty [OPTION] [OPTION] […] Description Vboxgetty is the heart of vbox: it watches the isdn system and waits for incoming voice calls, Options -f, –file FILE Config file to use. Default is the file ‘/etc/isdn/vboxgetty.conf’. -d, –device TTY ISDNdevice to use. You must use this option! -h, –help…
vboxd – isdn voice box daemon Synopsis vboxd [OPTION] [OPTION] […] Description Vboxd is a daemon which is accessed via tcp/ip and can give you the messages recorded with vboxgetty, or change them. vboxd uses port 20012 (tcp and udp), as described in /etc/services. Options -f, –file FILE Config file to use. Default is the…
vbetool_selinux – Security Enhanced Linux Policy for the vbetool processes Description Security-Enhanced Linux secures the vbetool processes via flexible mandatory access control. The vbetool processes execute with the vbetool_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
varnishlog_selinux – Security Enhanced Linux Policy for the varnishlog processes Description Security-Enhanced Linux secures the varnishlog processes via flexible mandatory access control. The varnishlog processes execute with the varnishlog_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
varnishd_selinux – Security Enhanced Linux Policy for the varnishd processes Description Security-Enhanced Linux secures the varnishd processes via flexible mandatory access control. The varnishd processes execute with the varnishd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
varnetload – tool to create reproducable network traffic Synopsis varnetload [-d delay] [-t time to run] [-u url] Description varnetload is a simple python script to create reproducable sustained network traffic. In order to use it effectively, you need to have an HTTP server present in your local LAN where you can put files. Upload…
validlocale – Test if a given locale is available Syntax validlocale <locale> Description Test if the locale given as argument is a valid locale. If it isn’t, print on stdout the string to add to /etc/locale.gen to make locale-gen generate the locale (if it exists at all). Files /usr/sbin/validlocale /usr/share/i18n/SUPPORTED Environment Variables DEFAULTCHARSET Which charset…
v4l-conf – configure a video4linux driver Synopsis v4l-conf [ options ] Description v4l-conf is a small helper tool. It figures out the video mode and framebuffer base address of the graphics board and configures a video4linux driver like bttv. This is needed for drivers which can DMA the video over PCI directly into the video…
uuxqt – UUCP execution daemon Synopsis uuxqt [ options ] Description The uuxqt daemon executes commands requested by uux (1) from either the local system or from remote systems. It is started automatically by the uucico (8) daemon (unless uucico (8) is given the -q or –nouuxqt option). There is normally no need to run…
uux_selinux – Security Enhanced Linux Policy for the uux processes Description Security-Enhanced Linux secures the uux processes via flexible mandatory access control. The uux processes execute with the uux_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
uuidd_selinux – Security Enhanced Linux Policy for the uuidd processes Description Security-Enhanced Linux secures the uuidd processes via flexible mandatory access control. The uuidd processes execute with the uuidd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
uuidd – UUID generation daemon Synopsis uuidd [options] Description The uuidd daemon is used by the UUID library to generate universally unique identifiers (UUIDs), especially time-based UUIDs, in a secure and guaranteed-unique fashion, even in the face of large numbers of threads running on different CPUs trying to grab UUIDs. Options -d, –debug Run uuidd…
uucpd_selinux – Security Enhanced Linux Policy for the uucpd processes Description Security-Enhanced Linux secures the uucpd processes via flexible mandatory access control. The uucpd processes execute with the uucpd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
uucico – UUCP file transfer daemon Synopsis uucico [ options ] Description The uucico daemon processes file transfer requests queued by uucp (1) and uux (1). It is started when uucp or uux is run (unless they are given the -r option). It is also typically started periodically using entries in the crontab table(s). When…
utempter_selinux – Security Enhanced Linux Policy for the utempter processes Description Security-Enhanced Linux secures the utempter processes via flexible mandatory access control. The utempter processes execute with the utempter_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…
usn-tombstone-cleanup.pl – Directory Server perl script for cleaning up tombstone entries. Synopsis usn-tombstone-cleanup.pl [-Z serverID] [-D rootdn] { -w password | -w – | -j filename } -s suffix -n backend [-m maxusn_to_delete] [-P protocol] [-v] [-h] Description Deletes the tombstone entries maintained by the instance if the USN Plug-in is enabled. Options A summary…
usernetctl_selinux – Security Enhanced Linux Policy for the usernetctl processes Description Security-Enhanced Linux secures the usernetctl processes via flexible mandatory access control. The usernetctl processes execute with the usernetctl_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier. For example: ps -eZ | grep…