The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
sconvert – convert spice formats Synopsissconvert fromtype fromfile totype tofile sconvert fromtype totype sconvert DescriptionSconvert translates spice output files among three formats: the old binary format, a new binary format, and a new ascii format. The formats are specified by the fromtype and totype arguments: `o’ for the old format, `b’ for the new binary…
ngnutmeg – ngspice post-processor Synopsisngnutmeg [options] [datafile …] DescriptionThis man page is just a small overview. The primary documentation of ngspice is in the ngspice] User’s Manual, which is available as a pdf file. ngnutmeg is a post processor for ngspice] – it takes the raw output file created by ngspice -r and plots the…
ngmultidec – make ngpice sub-circuit for coupled transmission lines Synopsisngmultidec [ options… ] Descriptionngmultidec writes an ngspice input file to standard output which describes a sub-circuit for coupled lines using uncoupled simple lossy lines. Each generated subcircuit models a 4-conductor transmission line with the following parameters: length l, line capacitance c, line resistance r, line…
nghttpx – HTTP/2 proxy Synopsisnghttpx [OPTIONS]… [<PRIVATE_KEY> <CERT>] DescriptionA reverse proxy for HTTP/2, HTTP/1 and SPDY. <PRIVATE_KEY> Set path to server’s private key. Required unless -p, –client or –frontend-no-tls are given. <CERT> Set path to server’s certificate. Required unless -p, –client or –frontend-no-tls are given. To make OCSP stapling work, this must be absolute path.OptionsThe…
nghttpd – HTTP/2 server Synopsisnghttpd [OPTION]… <PORT> [<PRIVATE_KEY> <CERT>] DescriptionHTTP/2 server <PORT> Specify listening port number. <PRIVATE_KEY> Set path to server’s private key. Required unless –no-tls is specified. <CERT> Set path to server’s certificate. Required unless –no-tls is specified.Options-a, –address=<ADDR> The address to bind to. If not specified the default IP address determined by getaddrinfo…
nghttp – HTTP/2 client Synopsisnghttp [OPTIONS]… <URI>… DescriptionHTTP/2 client <URI> Specify URI to access.Options-v, –verbose Print debug information such as reception and transmission of frames and name/value pairs. Specifying this option multiple times increases verbosity. -n, –null-out Discard downloaded data. -O, –remote-name Save download data in the current directory. The filename is derived from URI….
ngettext – translate message and choose plural form Synopsisngettext [,OPTION/] [,TEXTDOMAIN/] ,MSGID MSGID-PLURAL COUNT/ DescriptionThe ngettext program translates a natural language message into the user’s language, by looking up the translation in a message catalog, and chooses the appropriate plural form, which depends on the number COUNT and the language of the message catalog where…
ngetlite – retrieve files from NNTP hosts Synopsisngetlite <listfiles…> Descriptionngetlite retrieves messages as described in each listfile. Listfiles are generated with: nget -w <listfile> <retrieval args> In almost all circumstances, you will want to download and decode directly with nget. However, in some cases ngetlite can be useful on computers with low ram or cpu,…
nget – retrieve files from NNTP (usenet news) hosts Synopsisnget […] Descriptionnget retrieves messages matching a regular expression, and decodes any files contained within. Multipart messages are automatically pieced together. Parts from multiple servers will be combined if needed. OptionsThe order options are specified is significant. In general, an option will only affect options that…
ng4ex – NCAR Graphics High Level Utilities Example Programs Synopsisng4ex [-A] [-C] [-Fortran] [-NCL] [-cdf] [-csagrid] [-cssgrid] [-gui] [-anno] [-gsun] [-W workstation_type] [-app] [-basic] [-contourplot] [-fitgrid] [-labelbar] [-legend] [-primitives] [-mapplot] [-natgrid] [-ngmath] [-streamplot] [-shgrid] [-textitem] [-tickmark] [-title] [-vectorplot] [-xyplot] [-list] [-clean] [-n] name … Descriptionng4ex provides the user with access to several C, Fortran, and…
nfstest_xid – Verify packets are matched correctly by their XID Synopsisnfstest_xid <trace1> [<trace2> …] DescriptionSearch all the packet traces given for XID inconsistencies. Verify all operations in the NFSv4.x COMPOUND reply are the same as the operations given in the call. Options–version show program’s version number and exit -h, –help show this help message and…
nfstest_sparse – Sparse file tests Synopsisnfstest_sparse –server <server> [options] DescriptionVerify correct functionality of sparse files. These are files which have unallocated or uninitialized data blocks as holes. The new NFSv4.2 operation SEEK is used to search for the next hole or data segment in a file. Basic tests verify the SEEK operation returns the correct…
nfstest_posix – POSIX file system level access tests Synopsisnfstest_posix –server <server> [options] DescriptionVerify POSIX file system level access over the specified path using positive and negative testing. Valid for any version of NFS. Options–version show program’s version number and exit -h, –help show this help message and exit -f FILE, –file=FILE File where options are…
nfstest_pnfs – Basic pNFS functional tests Synopsisnfstest_pnfs –server <server> [options] DescriptionVerify basic pNFS functionality for file (both READ and WRITE), including opening a second file within the same mount and having a lock on the file. Also, verify basic pNFS functionality for a file opened for both READ and WRITE while reading the file first…
nfstest_pkt – Packet trace decoder Synopsisnfstest_pkt [options] <trace1.cap> [<trace2.cap> …] DescriptionDecode and display all packets in the packet trace file(s) given. The match option gives the ability to search for specific packets within the packet trace file. Other options allow displaying of their corresponding call or reply when only one or the other is matched….
nfstest_lock – Locking tests Synopsisnfstest_lock –server <server> [–client <client>] [options] DescriptionBasic locking tests verify that a lock is granted using various arguments to fcntl. These include blocking and non-blocking locks, read or write locks, where the file is opened either for reading, writing or both. It also checks different ranges including limit conditions. Non-overlapping tests…
nfstest_io – I/O tool Synopsisnfstest_io -d <datadir> [options] DescriptionThis I/O tool is used to create and manipulate files of different types. The arguments allow running for a specified period of time as well as running multiple processes. Each process modifies a single file at a time and the file name space is different for each…
nfstest_interop – NFS interoperability tests Synopsisnfstest_interop –server <server> [options] DescriptionBasic interoperability tests verify that a file written with different versions of NFS is written correctly. The contents of the file are verified by reading the file back using one of the NFS versions. The tests append different data from different versions of NFS one at…
nfstest_file – Find all packets for a specific file Synopsisnfstest_file [options] -p <filepath> <trace1.cap> [<trace2.cap> …] DescriptionDisplay all NFS packets for the specified path. It takes a relative path, where it searches for each of the directory entries given in the path until it gets the file handle for the directory where the file is…
nfstest_dio – Direct I/O tests Synopsisnfstest_dio –server <server> [options] DescriptionFunctional direct I/O tests verify that every READ/WRITE is sent to the server instead of the client caching the requests. Client bypasses read ahead by sending the READ with only the requested bytes. Verify the client correctly handles eof marker when reading the whole file. Verify…