The Linux Manuals (man pages) document is an important part of Linux documents. Linux Manuals are organized as several sections. Each section has a group of commands for a specific area in Linux usage, administration or development.
arjdisp – ARJ simple graphical interface Synopsisarj [test|archive_name filename uncompsize bytes compsize cmd_verb] DescriptionThe arjdisp command is a graphical interface for arj. See Alsoarj(1). AuthorThis manual page was written by Ola Lundqvist <opal [at] debian.org> in pod format, then converted by Guillem Jover <guillem [at] debian.org> to nroff format.
arj – Archiver for .arj files Synopsisarj command [-switch[–|+|option]] archive[.arj] [base directory] [!list name|path name|wildcard name] Descriptionarj is a compression and file archiving utility. It was invented by Robert K. Jung. ARJ stands for Archived by Robert Jung. Commandsac Add Chapter to chapter archive. cc Convert archive to Chapter archive. dc Delete last Chapter from…
aria_read_log – display Aria log file contents Synopsisaria_read_log OPTIONS DescriptionDisplay and apply log records from a Aria transaction log found in the current directory (for now) Note: Aria is compiled without -DIDENTICAL_PAGES_AFTER_RECOVERY which means that the table files are not byte-to-byte identical to files created during normal execution. This should be ok, except for test…
aria_pack – generate compressed, read-only Aria tables Synopsisaria_pack [OPTIONS] filename… DescriptionPack a Aria-table to take much less space. Keys are not updated, you must run aria_chk -rq on the index (.MAI) file afterwards to update the keys. You should give the .MAI file as the filename argument. To unpack a packed table, run aria_chk -u…
aria_ftdump – display full-text index information DescriptionUse: aria_ft_dump <table_name> <index_num> -?, -h, –help Display help and exit. -c, –count Calculate per-word stats (counts and global weights). -d, –dump Dump index (incl. data offsets and word weights). -l, –length Report length distribution. -s, –stats Report global stats. -v, –verbose Be verbose.See Alsomyisam_ftdump(1) For more information, please…
aria_dump_log – Dump content of Aria log pages. Synopsisaria_dump_log -f file OPTIONS DescriptionDump content of Aria log pages. -#, –debug[=name] Output debug log. Often the argument is ‘d:t:o,filename’. -f, –file=name Path to file which will be read -?, –help Display this help and exit. -o, –offset=# Start reading log from this offset -n, –pages=# Number…
aria_chk – Aria table-maintenance utility Synopsisaria_chk [OPTIONS] tables[.MAI] DescriptionDescribe, check and repair of Aria tables. Used without options all tables on the command will be checked for errors Global options-#, –debug=… Output debug log. Often this is ‘d:t:o,filename’. -H, –HELP Print all argument options sorted alphabetically. -?, –help Print all options by groups –datadir=path Path…
aria2c – The ultra fast download utility Synopsisaria2c [<OPTIONS>] [<URI>|<MAGNET>|<TORRENT_FILE>|<METALINK_FILE>] … Descriptionaria2 is a utility for downloading files. The supported protocols are HTTP(S), FTP, SFTP, BitTorrent, and Metalink. aria2 can download a file from multiple sources/protocols and tries to utilize your maximum download bandwidth. It supports downloading a file from HTTP(S)/FTP /SFTP and BitTorrent at…
arecordmidi – record Standard MIDI Files Synopsisarecordmidi -p client:port[,…] [options] midifile Descriptionarecordmidi is a command-line utility that records a Standard MIDI File from one or more ALSA sequencer ports. To stop recording, press Ctrl+C. Options-h,–help Prints a list of options. -V,–version Prints the current version. -l,–list Prints a list of possible input ports. -p,–port=client:port,… Sets…
arecord, aplay – command-line sound recorder and player for ALSA soundcard driver Synopsisarecord [flags] [filename] aplay [flags] [filename [filename]] … Descriptionarecord is a command-line soundfile recorder for the ALSA soundcard driver. It supports several file formats and multiple soundcards with multiple devices. If recording with interleaved mode samples the file is automatically split before the…
arduino – An IDE for Arduino-compatible electronics prototyping platforms Synopsisarduino DescriptionThe Arduino development environment consists of a text editor, example code, and tools for compiling and uploading code to Arduino and compatible microcontroller boards. See Also/usr/share/arduino/reference/index.html, http://arduino.cc/ AuthorPeter Oliver <arduino [at] mavit.org.uk>
ardour – a digital audio workstation Synopsisardour -b [-U file] [session] ardour –help DescriptionArdour is a multichannel hard disk recorder (HDR) and digital audio workstation (DAW). It is capable of simultaneous recording 24 or more channels of 32 bit audio at 48kHz. Ardour is intended to function as a "professional" HDR system, replacing dedicated hardware…
ardour – a digital audio workstation Synopsisardour -b [-U file] [session] ardour –help DescriptionArdour is a multichannel hard disk recorder (HDR) and digital audio workstation (DAW). It is capable of simultaneous recording 24 or more channels of 32 bit audio at 48kHz. Ardour is intended to function as a "professional" HDR system, replacing dedicated hardware…
arcwsrf – run WSRF query against service DescriptionThe arcwsrf command issues WSRF resource property query to service specified by its URL. Synopsisarcwsrf [options] service_url [query] Options -h, –help Show help options -p, –property=[-]name Request for specific Resource Property -t, –timeout=seconds timeout in seconds (default 20) -z, –conffile=filename configuration file (default ~/.arc/client.conf) -d, –debug=debuglevel FATAL, ERROR, WARNING, INFO, VERBOSE or DEBUG -v, –version print version information…
arctest – ARC Test Suite DescriptionThe arctest command tests basic ARC client and server setup. Synopsisarctest [options] Options-c, –cluster=name select one or more computing elements: name can be an alias for a single CE, a group of CEs or a URL -g, –index=name select one or more registries: name can be an alias for a…
arcsync – ARC Synchronize DescriptionThe arcsync command synchronizes your local jobs list with the information at a given cluster or index server. Synopsisarcsync [options] Options-c, –cluster=name select one or more computing elements: name can be an alias for a single CE, a group of CEs or a URL -g, –index=name select one or more registries:…
arcsub – ARC Submission DescriptionThe arcsub command is used for submitting jobs to Grid enabled computing resources. Synopsisarcsub [options] [filename …] Options-c, –cluster=name select one or more computing elements: name can be an alias for a single CE, a group of CEs or a URL -g, –index=name select one or more registries: name can be…
arcstat – ARC Status DescriptionThe arcstat command is used for obtaining the status of jobs that have been submitted to grid enabled resources. Synopsisarcstat [options] [job …] Options-a, –all all jobs -j, –joblist=filename the file storing information about active jobs (default ~/.arc/jobs.xml) -i, –jobids-from-file=filename a file containing a list of jobIDs -c, –cluster=name select one…
arcrm – delete files DescriptionThe arcrm command deletes files on grid storage elements and indexing services. Synopsisarcrm [options] url [url …] Options-f, –force remove logical file name registration even if not all physical instances were removed -P, –listplugins list the available plugins (protocols supported) -t, –timeout=seconds timeout in seconds (default 20) -z, –conffile=filename configuration file…
arcresume – ARC Resume DescriptionThe arcresume command is used for resuming a job that was submitted to grid enabled resources and then subsequently failed. The job will be resumed at the last ok state reported by the cluster. Synopsisarcresume [options] [job …] Options-a, –all all jobs -j, –joblist=filename the file storing information about active jobs…