Linux Manuals

byobu-enable, byobu-disable – wrapper script for enabling/disabling automatic startup of byobu after login into text console Synopsisbyobu-enable byobu-disable Descriptionbyobu-enable will do two things:  1) run byobu-launcher-install(1) to configure byobu(1) to launch automatically on login  2) then launch byobu(1) byobu-disable will simply run byobu-launcher-uninstall(1). BugsNone found, yet. See Alsoscreen(1), byobu-config(1), byobu-export(1), byobu-status(1), byobu-status-detail(1) http://byobu.co AuthorThis manpage was written by Jan Klepek <jan.klepek at…

byobu-prompt, byobu-enable-prompt, byobu-disable-prompt – add and remove a nice color prompt to your shell configuration Synopsisbyobu-prompt byobu-enable-prompt byobu-disable-prompt DescriptionByobu provides a special PS1 prompt command, compatible with Bash shells. It will display the previous command’s exit code, if it’s not zero. It will use 3 separate colors for the local username, hostname, and the current…

byobu-ctrl-a – Configure Byobu’s ctrl-a behavior Descriptionbyobu-ctrl-a is an interactive program that allows a user to configure the behavior of the ‘ctrl-a’ key sequence. Traditional GNU screen(1) uses ctrl-a as its escape character, while GNU emacs(1) uses ctrl-a to move the cursor to the beginning of the line. This conflict has caused unending amounts of…

byobu-config – Configuration utility for byobu Descriptionbyobu-config is an application that can configure a number of options available in the byobu utility. The menu provided by the byobu should be self-explanatory. See Alsoscreen(1) http://byobu.co AuthorThis manpage and the utility were written by Dustin Kirkland <kirkland [at] byobu.co> for Ubuntu systems (but may be used by…

bximage – Interactive Disk Image Creator for Bochs Synopsisbximage [options] [filename] DescriptionBximage is an easy to use console based tool for creating disk images, particularly for use with Bochs. It is completely interactive if no command line arguments are used. It can be switched to a non-interactive mode if all required parameters are given in…

bxcommit – Interactive Tool to Commit Redologs into flat Disk Images for Bochs Usagebxcommit DescriptionBxcommit is an easy to use console based tool for committing redologs into flat disk images, particularly for use with Bochs. It is completely interactive, so no command line arguments are needed to use bxcommit. LicenseThis program is distributed under the…

bwrap – container setup utility Synopsis bwrap [OPTION…] [COMMAND]Descriptionbwrap is a privileged helper for container setup. You are unlikely to use it directly from the commandline, although that is possible. It works by creating a new, completely empty, filesystem namespace where the root is on a tmpfs that is invisible from the host, and which…

bwm-ng – Bandwidth Monitor NG (Next Generation), a live bandwidth monitor for network and disk io. Synopsisbwm-ng [options] … [configfile] Descriptionbwm-ng can be used to monitor the current bandwidth of all or some specific network interfaces or disks (or partitions). It shows total of in and out as well as total of all interfaces/devices. Several…

bwa – Burrows-Wheeler Alignment Tool Synopsisbwa index ref.fa bwa mem ref.fa reads.fq > aln-se.sam bwa mem ref.fa read1.fq read2.fq > aln-pe.sam bwa aln ref.fa short_read.fq > aln_sa.sai bwa samse ref.fa aln_sa.sai short_read.fq > aln-se.sam bwa sampe ref.fa aln_sa1.sai aln_sa2.sai read1.fq read2.fq > aln-pe.sam bwa bwasw ref.fa long_read.fq > aln.sam DescriptionBWA is a software package for…

BusyBox – The Swiss Army Knife of Embedded Linux Syntax busybox <applet> [arguments…] # or <applet> [arguments…] # if symlinkedDescriptionBusyBox combines tiny versions of many common UNIX utilities into a single small executable. It provides minimalist replacements for most of the utilities you usually find in GNU coreutils, util-linux, etc. The utilities in BusyBox generally…

busctl – Introspect the bus Synopsis busctl [OPTIONS…] [COMMAND] [NAME…]Descriptionbusctl may be used to introspect and monitor the D-Bus bus. CommandsThe following commands are understood: list Show all peers on the bus, by their service names. By default, shows both unique and well-known names, but this may be changed with the –unique and –acquired switches….

burst – explode digests into messages Synopsis burst [+folder] [msgs] [-inplace | -noinplace] [-mime | -nomime] [-automime] [-quiet | -noquiet] [-verbose | -noverbose] [-version] [-help]DescriptionBurst considers the specified messages in the named folder to be Internet digests, and explodes them in that folder. If -inplace is given, each digest is replaced by the “table of…

bzip2, bunzip2 – a block-sorting file compressor, v1.0.8 bzcat – decompresses files to stdout bzip2recover – recovers data from damaged bzip2 files Synopsisbzip2 [ -cdfkqstvzVL123456789 ] [ filenames … ] bzip2 [ -h|–help ] bunzip2 [ -fkvsVL ] [ filenames … ] bunzip2 [ -h|–help ] bzcat [ -s ] [ filenames … ] bzcat…

bundledoc – bundle all the files needed by a LaTeX document Synopsisbundledoc [–version] [–help] [—[no]verbose] [–texfile=file.tex] [–directory=directory] [—[no]localonly] [–exclude=string] [–include=filespec] [–manifest=file] [—listdeps=[yes|no|only|rel]…] [—[no]keepdirs] [–config=file.cfg] file.dep Descriptionbundledoc is a post-processor for the snapshot package that bundles together all the classes, packages, and files needed to build a given LaTeX document. It reads the .dep file that…

bundle – Ruby Dependency Management Synopsisbundle COMMAND [–no-color] [–verbose] [ARGS] DescriptionBundler manages an application’s dependencies through its entire life across many machines systematically and repeatably. See the bundler website https://bundler.io for information on getting started, and Gemfile(5) for more information on the Gemfile format. Options–no-color Print all output without color –retry, -r Specify the number…

bundle-viz – Generates a visual dependency graph for your Gemfile Synopsisbundle viz [–file=FILE] [–format=FORMAT] [–requirements] [–version] [–without=GROUP GROUP] Descriptionviz generates a PNG file of the current Gemfile(5) as a dependency graph. viz requires the ruby-graphviz gem (and its dependencies). The associated gems must also be installed via bundle install(1) bundle-install.1.html. Options–file, -f The name to…

bundle-update – Update your gems to the latest available versions Synopsisbundle update *gems [–all] [–group=NAME] [–source=NAME] [–local] [–ruby] [–bundler[=VERSION]] [–full-index] [–jobs=JOBS] [–quiet] [–patch|–minor|–major] [–redownload] [–strict] [–conservative] DescriptionUpdate the gems specified (all gems, if –all flag is used), ignoring the previously installed gems specified in the Gemfile.lock. In general, you should use bundle install(1) bundle-install.1.html to…

bundle-show – Shows all the gems in your bundle, or the path to a gem Synopsisbundle show [GEM] [–paths] DescriptionWithout the [GEM] option, show will print a list of the names and versions of all gems that are required by your [Gemfile(5)][Gemfile(5)], sorted by name. Calling show with [GEM] will list the exact location of…

bundle-remove – Removes gems from the Gemfile Synopsisbundle remove [GEM [GEM …]] [–install] DescriptionRemoves the given gems from the Gemfile while ensuring that the resulting Gemfile is still valid. If a gem cannot be removed, a warning is printed. If a gem is already absent from the Gemfile, and error is raised. Options–install Runs bundle…

bundle-pristine – Restores installed gems to their pristine condition Synopsisbundle pristine Descriptionpristine restores the installed gems in the bundle to their pristine condition using the local gem cache from RubyGems. For git gems, a forced checkout will be performed. For further explanation, bundle pristine ignores unpacked files on disk. In other words, this command utilizes…